Hi All: Joint debug with test team, the All compute nodes cannot be remotely ssh. It prompt password is not corrects. So the computes logs can not be captured . Need some expert points : During/After PXE installer, which compopents and where the related code about the sysadmin password is synced to computes ? Thanks. BR Austin Sun. From: Dimofte, Alexandru <alexandru.dimofte@intel.com> Sent: Wednesday, April 28, 2021 8:47 PM To: starlingx-discuss@lists.starlingx.io Subject: [Starlingx-discuss] Sanity Master Test LAYERED build ISO 20210428T045002Z Sanity Test from 2021-April-28 (http://mirror.starlingx.cengn.ca/mirror/starlingx/master/centos/flock/202104... ) Status: RED This image is affected by: https://bugs.launchpad.net/starlingx/+bug/1926029 - Compute-0 install failure: Configuration failure, threshold reached, Lock/Unlock to retry Critical alarm Id: 200.004 - compute-0 experienced a service-affecting failure. Auto-recovery in progress. Manual Lock and Unlock may be required if auto-recovery is unsuccessful. Critical alarm Id: 200.011 - compute-0 experienced a configuration failure. OBS: This issue is observed only on MASTER branch (RC 5.0 is not affected). Helm-Chart used: http://mirror.starlingx.cengn.ca/mirror/starlingx/master/centos/flock/202104... Regards, Alexandru Dimofte [Logo Description automatically generated] Dimofte Alexandru Software Engineer STARLINGX TEAM Skype no: +40 336403734 Personal Mobile: +40 743167456 alexandru.dimofte@intel.com<mailto:alexandru.dimofte@intel.com> Intel Romania