[Starlingx-discuss] Bootstrap controller-0 failed as task [bootstrap/bringup-bootstrap-applications] failed
Hi, I according to https://docs.starlingx.io/deploy_install_guides/r4_release/virtual/controlle..., task [bootstrap/bringup-bootstrap-applications : Wait until application is in the applied state] failed. Could you please help me? Thanks. ===================================== My Environment: 1. I install StarlingX in Virtual Environment. 2. StarlingX version: R4.0 3. stx-tools: master 4. docker.elastic.co network delay: about 230ms (using ping docker.elastic.co) 5. Steps: a. Set system password succesfully. b. Run following script in console: export CONTROLLER0_OAM_CIDR=10.10.10.3/24 export DEFAULT_OAM_GATEWAY=10.10.10.1 sudo ip address add $CONTROLLER0_OAM_CIDR dev eth1000 sudo ip link set up dev eth1000 sudo ip route add default via $DEFAULT_OAM_GATEWAY dev eth1000 c. cp /usr/share/ansible/stx-ansible/playbooks/host_vars/bootstrap/default.yml $HOME/localhost.yml d. I submit the required image to Huawei Container Image Service in advance. For details, please refer to the following link: You can refer to the URL: https://www.huaweicloud.com/product/swr.html e. modify and add following informations in $HOME/localhost.yml: system_mode: duplex external_oam_node_0_address: 10.10.10.3 external_oam_node_1_address: 10.10.10.4 admin_password: Password123$%^ ansible_become_pass: Password123$%^ docker_registries: k8s.gcr.io: gcr.io: quay.io: docker.io: docker.elastic.co: defaults: url: You can refer to the URL: https://www.huaweicloud.com/product/swr.html username: You can refer to the URL: https://www.huaweicloud.com/product/swr.html password: You can refer to the URL: https://www.huaweicloud.com/product/swr.html f. ansible-playbook /usr/share/ansible/stx-ansible/playbooks/bootstrap.yml All images downloaded and pushed to the local registry in 1191.2941618 seconds Some steps were successfully executed TASK [bootstrap/bringup-bootstrap-applications : Wait until application is in the uploaded state] *** FAILED - RETRYING: Wait until application is in the uploaded state (3 retries left). changed: [localhost] TASK [bootstrap/bringup-bootstrap-applications : Apply overrides for application] *** TASK [bootstrap/bringup-bootstrap-applications : Apply application] ************ changed: [localhost] TASK [bootstrap/bringup-bootstrap-applications : Wait until application is in the applied state] *** FAILED - RETRYING: Wait until application is in the applied state (30 retries left). .... fatal: [localhost]: FAILED! => {"attempts": 30, "changed": true, "cmd": "source /etc/platform/openrc; system application-show nginx-ingress-controller --column status --format value", "delta": "0:00:01.670146", "end": "2021-04-20 09:03:21.549258", "rc": 0, "start": "2021-04-20 09:03:19.879112", "stderr": "", "stderr_lines": [], "stdout": "apply-failed", "stdout_lines": ["apply-failed"]} PLAY RECAP ********************************************************************* localhost : ok=330 changed=167 unreachable=0 failed=1 Issues: 1. FAILED - RETRYING: Wait until application is in the uploaded state (3 retries left). and TASK [bootstrap/bringup-bootstrap-applications : Wait until application is in the applied state] 2. Do I have to set up proxy for docker to solve this problem？ =============================================================== Best regards with you, Longqian
Hi Longqian: Would you like check “kubectl describe po -n kube-system $(kubectl get po -n kube-system | grep ic-nginx-ingress | awk '{print $1}')" Result ? Is it because docker images pull failure or other issue ? BR Austin Sun. From: Longqian Zhao <zhaolongqian456@163.com> Sent: Tuesday, April 20, 2021 7:01 PM To: starlingx-discuss@lists.starlingx.io; allain.legacy@windriver.com; thorsten.steuer@acdp.at Subject: [Starlingx-discuss] Bootstrap controller-0 failed as task [bootstrap/bringup-bootstrap-applications] failed Hi, I according to https://docs.starlingx.io/deploy_install_guides/r4_release/virtual/controlle..., task [bootstrap/bringup-bootstrap-applications : Wait until application is in the applied state] failed. Could you please help me? Thanks. ===================================== My Environment: 1. I install StarlingX in Virtual Environment. 2. StarlingX version: R4.0 3. stx-tools: master 4. docker.elastic.co network delay: about 230ms (using ping docker.elastic.co) 5. Steps: a. Set system password succesfully. b. Run following script in console: export CONTROLLER0_OAM_CIDR=10.10.10.3/24 export DEFAULT_OAM_GATEWAY=10.10.10.1 sudo ip address add $CONTROLLER0_OAM_CIDR dev eth1000 sudo ip link set up dev eth1000 sudo ip route add default via $DEFAULT_OAM_GATEWAY dev eth1000 c. cp /usr/share/ansible/stx-ansible/playbooks/host_vars/bootstrap/default.yml $HOME/localhost.yml d. I submit the required image to Huawei Container Image Service in advance. For details, please refer to the following link: You can refer to the URL: https://www.huaweicloud.com/product/swr.html e. modify and add following informations in $HOME/localhost.yml: system_mode: duplex external_oam_node_0_address: 10.10.10.3 external_oam_node_1_address: 10.10.10.4 admin_password: Password123$%^ ansible_become_pass: Password123$%^ docker_registries: k8s.gcr.io: gcr.io: quay.io: docker.io: docker.elastic.co: defaults: url: You can refer to the URL: https://www.huaweicloud.com/product/swr.html username: You can refer to the URL: https://www.huaweicloud.com/product/swr.html password: You can refer to the URL: https://www.huaweicloud.com/product/swr.html f. ansible-playbook /usr/share/ansible/stx-ansible/playbooks/bootstrap.yml * All images downloaded and pushed to the local registry in 1191.2941618 seconds * Some steps were successfully executed * TASK [bootstrap/bringup-bootstrap-applications : Wait until application is in the uploaded state] *** FAILED - RETRYING: Wait until application is in the uploaded state (3 retries left). changed: [localhost] TASK [bootstrap/bringup-bootstrap-applications : Apply overrides for application] *** TASK [bootstrap/bringup-bootstrap-applications : Apply application] ************ changed: [localhost] TASK [bootstrap/bringup-bootstrap-applications : Wait until application is in the applied state] *** FAILED - RETRYING: Wait until application is in the applied state (30 retries left). .... fatal: [localhost]: FAILED! => {"attempts": 30, "changed": true, "cmd": "source /etc/platform/openrc; system application-show nginx-ingress-controller --column status --format value", "delta": "0:00:01.670146", "end": "2021-04-20 09:03:21.549258", "rc": 0, "start": "2021-04-20 09:03:19.879112", "stderr": "", "stderr_lines": [], "stdout": "apply-failed", "stdout_lines": ["apply-failed"]} PLAY RECAP ********************************************************************* localhost : ok=330 changed=167 unreachable=0 failed=1 Issues: 1. FAILED - RETRYING: Wait until application is in the uploaded state (3 retries left). and TASK [bootstrap/bringup-bootstrap-applications : Wait until application is in the applied state] 2. Do I have to set up proxy for docker to solve this problem？ =============================================================== Best regards with you, Longqian
Hi Austin, Glad to hear from you. I ran the command`kubectl describe po -n kube-system $(kubectl get po -n kube-system | grep ic-nginx-ingress | awk '{print $1}')` and added the result to the attachment(result.log), please check it carefully, thank you! =============================================================== Best regards with you, Longqian At 2021-04-20 20:59:43, "Sun, Austin" <austin.sun@intel.com> wrote: Hi Longqian: Would you like check “kubectl describe po -n kube-system $(kubectl get po -n kube-system | grep ic-nginx-ingress | awk '{print $1}')" Result ? Is it because docker images pull failure or other issue ? BR Austin Sun. From: Longqian Zhao <zhaolongqian456@163.com> Sent: Tuesday, April 20, 2021 7:01 PM To: starlingx-discuss@lists.starlingx.io; allain.legacy@windriver.com; thorsten.steuer@acdp.at Subject: [Starlingx-discuss] Bootstrap controller-0 failed as task [bootstrap/bringup-bootstrap-applications] failed Hi, I according to https://docs.starlingx.io/deploy_install_guides/r4_release/virtual/controlle..., task [bootstrap/bringup-bootstrap-applications : Wait until application is in the applied state] failed. Could you please help me? Thanks. ===================================== My Environment: 1. I install StarlingX in Virtual Environment. 2. StarlingX version: R4.0 3. stx-tools: master 4. docker.elastic.co network delay: about 230ms (using ping docker.elastic.co) 5. Steps: a. Set system password succesfully. b. Run following script in console: export CONTROLLER0_OAM_CIDR=10.10.10.3/24 export DEFAULT_OAM_GATEWAY=10.10.10.1 sudo ip address add $CONTROLLER0_OAM_CIDR dev eth1000 sudo ip link set up dev eth1000 sudo ip route add default via $DEFAULT_OAM_GATEWAY dev eth1000 c. cp /usr/share/ansible/stx-ansible/playbooks/host_vars/bootstrap/default.yml $HOME/localhost.yml d. I submit the required image to Huawei Container Image Service in advance. For details, please refer to the following link: You can refer to the URL: https://www.huaweicloud.com/product/swr.html e. modify and add following informations in $HOME/localhost.yml: system_mode: duplex external_oam_node_0_address: 10.10.10.3 external_oam_node_1_address: 10.10.10.4 admin_password: Password123$%^ ansible_become_pass: Password123$%^ docker_registries: k8s.gcr.io: gcr.io: quay.io: docker.io: docker.elastic.co: defaults: url: You can refer to the URL: https://www.huaweicloud.com/product/swr.html username: You can refer to the URL: https://www.huaweicloud.com/product/swr.html password: You can refer to the URL: https://www.huaweicloud.com/product/swr.html f. ansible-playbook /usr/share/ansible/stx-ansible/playbooks/bootstrap.yml All images downloaded and pushed to the local registry in 1191.2941618 seconds Some steps were successfully executed TASK [bootstrap/bringup-bootstrap-applications : Wait until application is in the uploaded state] *** FAILED - RETRYING: Wait until application is in the uploaded state (3 retries left). changed: [localhost] TASK [bootstrap/bringup-bootstrap-applications : Apply overrides for application] *** TASK [bootstrap/bringup-bootstrap-applications : Apply application] ************ changed: [localhost] TASK [bootstrap/bringup-bootstrap-applications : Wait until application is in the applied state] *** FAILED - RETRYING: Wait until application is in the applied state (30 retries left). .... fatal: [localhost]: FAILED! => {"attempts": 30, "changed": true, "cmd": "source /etc/platform/openrc; system application-show nginx-ingress-controller --column status --format value", "delta": "0:00:01.670146", "end": "2021-04-20 09:03:21.549258", "rc": 0, "start": "2021-04-20 09:03:19.879112", "stderr": "", "stderr_lines": [], "stdout": "apply-failed", "stdout_lines": ["apply-failed"]} PLAY RECAP ********************************************************************* localhost : ok=330 changed=167 unreachable=0 failed=1 Issues: 1. FAILED - RETRYING: Wait until application is in the uploaded state (3 retries left). and TASK [bootstrap/bringup-bootstrap-applications : Wait until application is in the applied state] 2. Do I have to set up proxy for docker to solve this problem？ =============================================================== Best regards with you, Longqian
The result you shared is calico pods , would you like if ingress pods is running successfully ? From: Longqian Zhao <zhaolongqian456@163.com> Sent: Tuesday, April 20, 2021 9:53 PM To: Sun, Austin <austin.sun@intel.com> Cc: starlingx-discuss@lists.starlingx.io; allain.legacy@windriver.com; thorsten.steuer@acdp.at Subject: Re:RE: [Starlingx-discuss] Bootstrap controller-0 failed as task [bootstrap/bringup-bootstrap-applications] failed Hi Austin, Glad to hear from you. I ran the command`kubectl describe po -n kube-system $(kubectl get po -n kube-system | grep ic-nginx-ingress | awk '{print $1}')` and added the result to the attachment(result.log), please check it carefully, thank you! =============================================================== Best regards with you, Longqian At 2021-04-20 20:59:43, "Sun, Austin" <austin.sun@intel.com<mailto:austin.sun@intel.com>> wrote: Hi Longqian: Would you like check “kubectl describe po -n kube-system $(kubectl get po -n kube-system | grep ic-nginx-ingress | awk '{print $1}')" Result ? Is it because docker images pull failure or other issue ? BR Austin Sun. From: Longqian Zhao <zhaolongqian456@163.com<mailto:zhaolongqian456@163.com>> Sent: Tuesday, April 20, 2021 7:01 PM To: starlingx-discuss@lists.starlingx.io<mailto:starlingx-discuss@lists.starlingx.io>; allain.legacy@windriver.com<mailto:allain.legacy@windriver.com>; thorsten.steuer@acdp.at<mailto:thorsten.steuer@acdp.at> Subject: [Starlingx-discuss] Bootstrap controller-0 failed as task [bootstrap/bringup-bootstrap-applications] failed Hi, I according to https://docs.starlingx.io/deploy_install_guides/r4_release/virtual/controlle..., task [bootstrap/bringup-bootstrap-applications : Wait until application is in the applied state] failed. Could you please help me? Thanks. ===================================== My Environment: 1. I install StarlingX in Virtual Environment. 2. StarlingX version: R4.0 3. stx-tools: master 4. docker.elastic.co network delay: about 230ms (using ping docker.elastic.co) 5. Steps: a. Set system password succesfully. b. Run following script in console: export CONTROLLER0_OAM_CIDR=10.10.10.3/24 export DEFAULT_OAM_GATEWAY=10.10.10.1 sudo ip address add $CONTROLLER0_OAM_CIDR dev eth1000 sudo ip link set up dev eth1000 sudo ip route add default via $DEFAULT_OAM_GATEWAY dev eth1000 c. cp /usr/share/ansible/stx-ansible/playbooks/host_vars/bootstrap/default.yml $HOME/localhost.yml d. I submit the required image to Huawei Container Image Service in advance. For details, please refer to the following link: You can refer to the URL: https://www.huaweicloud.com/product/swr.html e. modify and add following informations in $HOME/localhost.yml: system_mode: duplex external_oam_node_0_address: 10.10.10.3 external_oam_node_1_address: 10.10.10.4 admin_password: Password123$%^ ansible_become_pass: Password123$%^ docker_registries: k8s.gcr.io: gcr.io: quay.io: docker.io: docker.elastic.co: defaults: url: You can refer to the URL: https://www.huaweicloud.com/product/swr.html username: You can refer to the URL: https://www.huaweicloud.com/product/swr.html password: You can refer to the URL: https://www.huaweicloud.com/product/swr.html f. ansible-playbook /usr/share/ansible/stx-ansible/playbooks/bootstrap.yml * All images downloaded and pushed to the local registry in 1191.2941618 seconds * Some steps were successfully executed * TASK [bootstrap/bringup-bootstrap-applications : Wait until application is in the uploaded state] *** FAILED - RETRYING: Wait until application is in the uploaded state (3 retries left). changed: [localhost] TASK [bootstrap/bringup-bootstrap-applications : Apply overrides for application] *** TASK [bootstrap/bringup-bootstrap-applications : Apply application] ************ changed: [localhost] TASK [bootstrap/bringup-bootstrap-applications : Wait until application is in the applied state] *** FAILED - RETRYING: Wait until application is in the applied state (30 retries left). .... fatal: [localhost]: FAILED! => {"attempts": 30, "changed": true, "cmd": "source /etc/platform/openrc; system application-show nginx-ingress-controller --column status --format value", "delta": "0:00:01.670146", "end": "2021-04-20 09:03:21.549258", "rc": 0, "start": "2021-04-20 09:03:19.879112", "stderr": "", "stderr_lines": [], "stdout": "apply-failed", "stdout_lines": ["apply-failed"]} PLAY RECAP ********************************************************************* localhost : ok=330 changed=167 unreachable=0 failed=1 Issues: 1. FAILED - RETRYING: Wait until application is in the uploaded state (3 retries left). and TASK [bootstrap/bringup-bootstrap-applications : Wait until application is in the applied state] 2. Do I have to set up proxy for docker to solve this problem？ =============================================================== Best regards with you, Longqian
Yes, I want to know how do I check ingress pods is running successfully. Thanks! At 2021-04-20 23:43:24, "Sun, Austin" <austin.sun@intel.com> wrote: The result you shared is calico pods , would you like if ingress pods is running successfully ? From: Longqian Zhao <zhaolongqian456@163.com> Sent: Tuesday, April 20, 2021 9:53 PM To: Sun, Austin <austin.sun@intel.com> Cc: starlingx-discuss@lists.starlingx.io; allain.legacy@windriver.com; thorsten.steuer@acdp.at Subject: Re:RE: [Starlingx-discuss] Bootstrap controller-0 failed as task [bootstrap/bringup-bootstrap-applications] failed Hi Austin, Glad to hear from you. I ran the command`kubectl describe po -n kube-system $(kubectl get po -n kube-system | grep ic-nginx-ingress | awk '{print $1}')` and added the result to the attachment(result.log), please check it carefully, thank you! =============================================================== Best regards with you, Longqian At 2021-04-20 20:59:43, "Sun, Austin" <austin.sun@intel.com> wrote: Hi Longqian: Would you like check “kubectl describe po -n kube-system $(kubectl get po -n kube-system | grep ic-nginx-ingress | awk '{print $1}')" Result ? Is it because docker images pull failure or other issue ? BR Austin Sun. From: Longqian Zhao <zhaolongqian456@163.com> Sent: Tuesday, April 20, 2021 7:01 PM To:starlingx-discuss@lists.starlingx.io; allain.legacy@windriver.com; thorsten.steuer@acdp.at Subject: [Starlingx-discuss] Bootstrap controller-0 failed as task [bootstrap/bringup-bootstrap-applications] failed Hi, I according to https://docs.starlingx.io/deploy_install_guides/r4_release/virtual/controlle..., task [bootstrap/bringup-bootstrap-applications : Wait until application is in the applied state] failed. Could you please help me? Thanks. ===================================== My Environment: 1. I install StarlingX in Virtual Environment. 2. StarlingX version: R4.0 3. stx-tools: master 4. docker.elastic.co network delay: about 230ms (using ping docker.elastic.co) 5. Steps: a. Set system password succesfully. b. Run following script in console: export CONTROLLER0_OAM_CIDR=10.10.10.3/24 export DEFAULT_OAM_GATEWAY=10.10.10.1 sudo ip address add $CONTROLLER0_OAM_CIDR dev eth1000 sudo ip link set up dev eth1000 sudo ip route add default via $DEFAULT_OAM_GATEWAY dev eth1000 c. cp /usr/share/ansible/stx-ansible/playbooks/host_vars/bootstrap/default.yml $HOME/localhost.yml d. I submit the required image to Huawei Container Image Service in advance. For details, please refer to the following link: You can refer to the URL: https://www.huaweicloud.com/product/swr.html e. modify and add following informations in $HOME/localhost.yml: system_mode: duplex external_oam_node_0_address: 10.10.10.3 external_oam_node_1_address: 10.10.10.4 admin_password: Password123$%^ ansible_become_pass: Password123$%^ docker_registries: k8s.gcr.io: gcr.io: quay.io: docker.io: docker.elastic.co: defaults: url: You can refer to the URL: https://www.huaweicloud.com/product/swr.html username: You can refer to the URL: https://www.huaweicloud.com/product/swr.html password: You can refer to the URL: https://www.huaweicloud.com/product/swr.html f. ansible-playbook /usr/share/ansible/stx-ansible/playbooks/bootstrap.yml All images downloaded and pushed to the local registry in 1191.2941618 seconds Some steps were successfully executed TASK [bootstrap/bringup-bootstrap-applications : Wait until application is in the uploaded state] *** FAILED - RETRYING: Wait until application is in the uploaded state (3 retries left). changed: [localhost] TASK [bootstrap/bringup-bootstrap-applications : Apply overrides for application] *** TASK [bootstrap/bringup-bootstrap-applications : Apply application] ************ changed: [localhost] TASK [bootstrap/bringup-bootstrap-applications : Wait until application is in the applied state] *** FAILED - RETRYING: Wait until application is in the applied state (30 retries left). .... fatal: [localhost]: FAILED! => {"attempts": 30, "changed": true, "cmd": "source /etc/platform/openrc; system application-show nginx-ingress-controller --column status --format value", "delta": "0:00:01.670146", "end": "2021-04-20 09:03:21.549258", "rc": 0, "start": "2021-04-20 09:03:19.879112", "stderr": "", "stderr_lines": [], "stdout": "apply-failed", "stdout_lines": ["apply-failed"]} PLAY RECAP ********************************************************************* localhost : ok=330 changed=167 unreachable=0 failed=1 Issues: 1. FAILED - RETRYING: Wait until application is in the uploaded state (3 retries left). and TASK [bootstrap/bringup-bootstrap-applications : Wait until application is in the applied state] 2. Do I have to set up proxy for docker to solve this problem？ =============================================================== Best regards with you, Longqian
Hi, Austin: According to your suggestion, I ran the command “kubectl describe po -n kube-system $(kubectl get po -n kube-system | grep ic-nginx-ingress | awk '{print $1}')", and the failed image are calico/kube-controllers:v3.12.0 and registry.local:9001/k8s.gcr.io/coredns:1.6.7. What should I do now to solve this problem？ Following is the error message in the returned result： Events: Type Reason Age From Message ---- ------ ---- ---- ------- Warning FailedScheduling 22m (x3 over 22m) default-scheduler 0/1 nodes are available: 1 node(s) had taint {node.kubernetes.io/not-ready: }, that the pod didn't tolerate. Normal Scheduled 22m default-scheduler Successfully assigned kube-system/calico-kube-controllers-5cd4695574-8nmcj to controller-0 Normal Pulled 22m kubelet, controller-0 Container image "registry.local:9001/quay.io/calico/kube-controllers:v3.12.0" already present on machine Normal Created 22m kubelet, controller-0 Created container calico-kube-controllers Normal Started 22m kubelet, controller-0 Started container calico-kube-controllers Events: Type Reason Age From Message ---- ------ ---- ---- ------- Warning FailedScheduling 22m (x3 over 22m) default-scheduler 0/1 nodes are available: 1 node(s) had taint {node.kubernetes.io/not-ready: }, that the pod didn't tolerate. Warning FailedScheduling 83s (x17 over 22m) default-scheduler 0/1 nodes are available: 1 node(s) didn't match pod affinity/anti-affinity, 1 node(s) didn't satisfy existing pods anti-affinity rules. Events: Type Reason Age From Message ---- ------ ---- ---- ------- Warning FailedScheduling 22m (x3 over 22m) default-scheduler 0/1 nodes are available: 1 node(s) had taint {node.kubernetes.io/not-ready: }, that the pod didn't tolerate. Normal Scheduled 22m default-scheduler Successfully assigned kube-system/coredns-78d9fd7cb9-r289w to controller-0 Normal Pulled 22m kubelet, controller-0 Container image "registry.local:9001/k8s.gcr.io/coredns:1.6.7" already present on machine Normal Created 22m kubelet, controller-0 Created container coredns Normal Started 22m kubelet, controller-0 Started container coredns =============================================================== Best regards with you, Longqian At 2021-04-20 20:59:43, "Sun, Austin" <austin.sun@intel.com> wrote: Hi Longqian: Would you like check “kubectl describe po -n kube-system $(kubectl get po -n kube-system | grep ic-nginx-ingress | awk '{print $1}')" Result ? Is it because docker images pull failure or other issue ? BR Austin Sun. From: Longqian Zhao <zhaolongqian456@163.com> Sent: Tuesday, April 20, 2021 7:01 PM To: starlingx-discuss@lists.starlingx.io; allain.legacy@windriver.com; thorsten.steuer@acdp.at Subject: [Starlingx-discuss] Bootstrap controller-0 failed as task [bootstrap/bringup-bootstrap-applications] failed Hi, I according to https://docs.starlingx.io/deploy_install_guides/r4_release/virtual/controlle..., task [bootstrap/bringup-bootstrap-applications : Wait until application is in the applied state] failed. Could you please help me? Thanks. ===================================== My Environment: 1. I install StarlingX in Virtual Environment. 2. StarlingX version: R4.0 3. stx-tools: master 4. docker.elastic.co network delay: about 230ms (using ping docker.elastic.co) 5. Steps: a. Set system password succesfully. b. Run following script in console: export CONTROLLER0_OAM_CIDR=10.10.10.3/24 export DEFAULT_OAM_GATEWAY=10.10.10.1 sudo ip address add $CONTROLLER0_OAM_CIDR dev eth1000 sudo ip link set up dev eth1000 sudo ip route add default via $DEFAULT_OAM_GATEWAY dev eth1000 c. cp /usr/share/ansible/stx-ansible/playbooks/host_vars/bootstrap/default.yml $HOME/localhost.yml d. I submit the required image to Huawei Container Image Service in advance. For details, please refer to the following link: You can refer to the URL: https://www.huaweicloud.com/product/swr.html e. modify and add following informations in $HOME/localhost.yml: system_mode: duplex external_oam_node_0_address: 10.10.10.3 external_oam_node_1_address: 10.10.10.4 admin_password: Password123$%^ ansible_become_pass: Password123$%^ docker_registries: k8s.gcr.io: gcr.io: quay.io: docker.io: docker.elastic.co: defaults: url: You can refer to the URL: https://www.huaweicloud.com/product/swr.html username: You can refer to the URL: https://www.huaweicloud.com/product/swr.html password: You can refer to the URL: https://www.huaweicloud.com/product/swr.html f. ansible-playbook /usr/share/ansible/stx-ansible/playbooks/bootstrap.yml All images downloaded and pushed to the local registry in 1191.2941618 seconds Some steps were successfully executed TASK [bootstrap/bringup-bootstrap-applications : Wait until application is in the uploaded state] *** FAILED - RETRYING: Wait until application is in the uploaded state (3 retries left). changed: [localhost] TASK [bootstrap/bringup-bootstrap-applications : Apply overrides for application] *** TASK [bootstrap/bringup-bootstrap-applications : Apply application] ************ changed: [localhost] TASK [bootstrap/bringup-bootstrap-applications : Wait until application is in the applied state] *** FAILED - RETRYING: Wait until application is in the applied state (30 retries left). .... fatal: [localhost]: FAILED! => {"attempts": 30, "changed": true, "cmd": "source /etc/platform/openrc; system application-show nginx-ingress-controller --column status --format value", "delta": "0:00:01.670146", "end": "2021-04-20 09:03:21.549258", "rc": 0, "start": "2021-04-20 09:03:19.879112", "stderr": "", "stderr_lines": [], "stdout": "apply-failed", "stdout_lines": ["apply-failed"]} PLAY RECAP ********************************************************************* localhost : ok=330 changed=167 unreachable=0 failed=1 Issues: 1. FAILED - RETRYING: Wait until application is in the uploaded state (3 retries left). and TASK [bootstrap/bringup-bootstrap-applications : Wait until application is in the applied state] 2. Do I have to set up proxy for docker to solve this problem？ =============================================================== Best regards with you, Longqian
participants (2)
-
Longqian Zhao
-
Sun, Austin