Hi Marcel, If you look into the "Provisioning the second AIO controller" section, there is a script to setup the network. This looks like this: source /etc/platform/openrc export COMPUTE='controller-1' PHYSNET0='physnet0' PHYSNET1='physnet1' OAM_IF=enp0s3 DATA0IF=eth1000 DATA1IF=eth1001 NOWRAP="--nowrap" echo ">>> Configuring OAM Network" system host-if-modify -n oam0 -c platform --networks oam ${COMPUTE} $(system host-if-list -a $COMPUTE $NOWRAP | awk -v OAM_IF=$OAM_IF '{if ($4 == OAM_IF) { print $2;}}') So you can just run the "system host-if-modify" command with the settings for your system. In my case I needed to change the value of OAM_IF. -Erich On 2/27/19, 5:17 AM, "Marcel Schaible" <marcel@schaible-consulting.de> wrote: Hi Erich, thanks for your reply. Where did you set the variable? Marcel > "Cordoba Malibran, Erich" <erich.cordoba.malibran@intel.com> hat am 26. Februar 2019 um 23:08 geschrieben: > > > Hi Marcel, > > I had faced the same issue following these steps[0], I'm not sure if this is the same case. > Check the section "Configure Data Interfaces for Controller-1". > > In my case my network device was "ens3" not "enp0s3", setting this variable fixed the issue for me. > > OAM_IF=ens3 > > I hope this can help > > -Erich > > On 2/26/19, 11:11 AM, "Marcel Schaible" <marcel@schaible-consulting.de> wrote: > > Hi, > > I need help understanding this issue: > > After configuring according to the installation guide lines I cannot unlock controller-0, because > of a missing oam interface: > > root@localhost ~(keystone_admin)]# system host-unlock controller-0 > Can not unlock a controller host without an oam interface. Add an oam interface before re-attempting this command. > > > The command > > [root@localhost ~(keystone_admin)]# system network-list > +----+--------------------------------------+-----------+-----------+---------+--------------------------------------+ > | id | uuid | name | type | dynamic | pool_uuid | > +----+--------------------------------------+-----------+-----------+---------+--------------------------------------+ > | 2 | 4d532cb8-01f6-463d-8727-2884a65e5068 | pxeboot | pxeboot | True | 70f7017b-83b4-47ba-b414-b5098ad1cfd0 | > | 3 | 86224548-3c59-45ff-a244-349850e92168 | oam | oam | False | 81febeed-1c71-4fa0-92d4-e92a98e61c51 | > | 1 | cf644862-61ed-4760-ae95-1d4305add490 | mgmt | mgmt | True | ae271028-9814-4757-981b-396862cf2deb | > | 4 | e696bc41-b460-43c7-ba15-bc90a1b2e78e | multicast | multicast | False | 442b1b92-41fa-4b46-9560-88f930928578 | > +----+--------------------------------------+-----------+-----------+---------+--------------------------------------+ > > > shows the oam interface. > > Is there in issue with static ip? > > Any idea is welcome! > > Thanks > Marcel > > _______________________________________________ > Starlingx-discuss mailing list > Starlingx-discuss@lists.starlingx.io > http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss > >