[Starlingx-discuss] stx-integ-pylint failure due to python 2 vs. 3
Hi Folks,
Problem (branch master):
- stx-integ-pylint https://zuul.opendev.org/t/openstack/build/c8704619a95443ee8a049985061bfb57 : FAILURE in 3m 24s
is due to libvirt-python needing python 3 instead of 2, is nothing related to my change.
Anyone know how to get this fixed? CentOS 8 folks, any ideas?
Thanks,
-Jim
-------- Forwarded Message -------- Subject: Change in starlingx/integ[master]: Mellanox Driver: Disable use of kernel page pool functionality Date: Mon, 27 Jan 2020 17:39:36 +0000 From: Zuul (Code Review) review@openstack.org To: Jim Somerville jim.somerville@windriver.com CC: Victor Manuel Rodriguez Bahena vm.rod25@gmail.com, Robin Lu bin1.lu@intel.com, Brent Rowsell brent.rowsell@windriver.com, Steven Webster steven.webster@windriver.com, Scott Little scott.little@windriver.com, Ghada Khalil ghada.khalil@windriver.com, Wendy Mitchell wendy.mitchell@windriver.com, Don Penney don.penney@windriver.com, Saul Wold sgw@linux.intel.com
Zuul has posted comments on this change. ( https://review.opendev.org/704180 )
Change subject: Mellanox Driver: Disable use of kernel page pool functionality ......................................................................
Patch Set 1:
Build failed (check pipeline). For information on how to proceed, see http://docs.openstack.org/infra/manual/developers.html#automated-testing
- openstack-tox-docs https://zuul.opendev.org/t/openstack/build/cbee2ab21a7c4cf1b123e5da5299fd74 : SUCCESS in 4m 04s - openstack-tox-pep8 https://zuul.opendev.org/t/openstack/build/11fb173c3490482eb2902a46957e2caa : SUCCESS in 4m 52s - openstack-tox-linters https://zuul.opendev.org/t/openstack/build/1a614a32943143b6bdcbf7a145f05c9e : SUCCESS in 4m 18s - stx-integ-pylint https://zuul.opendev.org/t/openstack/build/c8704619a95443ee8a049985061bfb57 : FAILURE in 3m 24s
A new libvirt-python (6.0.0) was released on Jan 23rd https://pypi.org/project/libvirt-python/#history
and it likely only supports py3
I will look into it. Probably just need an upper constraint.
Al
-----Original Message----- From: Jim Somerville [mailto:jim.somerville@windriver.com] Sent: Monday, January 27, 2020 5:57 PM To: starlingx Subject: [Starlingx-discuss] stx-integ-pylint failure due to python 2 vs. 3
Hi Folks,
Problem (branch master):
- stx-integ-pylint https://zuul.opendev.org/t/openstack/build/c8704619a95443ee8a049985061bfb57 : FAILURE in 3m 24s
is due to libvirt-python needing python 3 instead of 2, is nothing related to my change.
Anyone know how to get this fixed? CentOS 8 folks, any ideas?
Thanks,
-Jim
-------- Forwarded Message -------- Subject: Change in starlingx/integ[master]: Mellanox Driver: Disable use of kernel page pool functionality Date: Mon, 27 Jan 2020 17:39:36 +0000 From: Zuul (Code Review) review@openstack.org To: Jim Somerville jim.somerville@windriver.com CC: Victor Manuel Rodriguez Bahena vm.rod25@gmail.com, Robin Lu bin1.lu@intel.com, Brent Rowsell brent.rowsell@windriver.com, Steven Webster steven.webster@windriver.com, Scott Little scott.little@windriver.com, Ghada Khalil ghada.khalil@windriver.com, Wendy Mitchell wendy.mitchell@windriver.com, Don Penney don.penney@windriver.com, Saul Wold sgw@linux.intel.com
Zuul has posted comments on this change. ( https://review.opendev.org/704180 )
Change subject: Mellanox Driver: Disable use of kernel page pool functionality ......................................................................
Patch Set 1:
Build failed (check pipeline). For information on how to proceed, see http://docs.openstack.org/infra/manual/developers.html#automated-testing
- openstack-tox-docs https://zuul.opendev.org/t/openstack/build/cbee2ab21a7c4cf1b123e5da5299fd74 : SUCCESS in 4m 04s - openstack-tox-pep8 https://zuul.opendev.org/t/openstack/build/11fb173c3490482eb2902a46957e2caa : SUCCESS in 4m 52s - openstack-tox-linters https://zuul.opendev.org/t/openstack/build/1a614a32943143b6bdcbf7a145f05c9e : SUCCESS in 4m 18s - stx-integ-pylint https://zuul.opendev.org/t/openstack/build/c8704619a95443ee8a049985061bfb57 : FAILURE in 3m 24s
Here you go Jim https://review.opendev.org/#/c/704566/
Al
-----Original Message----- From: Bailey, Henry Albert (Al) [mailto:Al.Bailey@windriver.com] Sent: Tuesday, January 28, 2020 8:35 AM To: Somerville, Jim; starlingx Subject: Re: [Starlingx-discuss] stx-integ-pylint failure due to python 2 vs. 3
A new libvirt-python (6.0.0) was released on Jan 23rd https://pypi.org/project/libvirt-python/#history
and it likely only supports py3
I will look into it. Probably just need an upper constraint.
Al
-----Original Message----- From: Jim Somerville [mailto:jim.somerville@windriver.com] Sent: Monday, January 27, 2020 5:57 PM To: starlingx Subject: [Starlingx-discuss] stx-integ-pylint failure due to python 2 vs. 3
Hi Folks,
Problem (branch master):
- stx-integ-pylint https://zuul.opendev.org/t/openstack/build/c8704619a95443ee8a049985061bfb57 : FAILURE in 3m 24s
is due to libvirt-python needing python 3 instead of 2, is nothing related to my change.
Anyone know how to get this fixed? CentOS 8 folks, any ideas?
Thanks,
-Jim
-------- Forwarded Message -------- Subject: Change in starlingx/integ[master]: Mellanox Driver: Disable use of kernel page pool functionality Date: Mon, 27 Jan 2020 17:39:36 +0000 From: Zuul (Code Review) review@openstack.org To: Jim Somerville jim.somerville@windriver.com CC: Victor Manuel Rodriguez Bahena vm.rod25@gmail.com, Robin Lu bin1.lu@intel.com, Brent Rowsell brent.rowsell@windriver.com, Steven Webster steven.webster@windriver.com, Scott Little scott.little@windriver.com, Ghada Khalil ghada.khalil@windriver.com, Wendy Mitchell wendy.mitchell@windriver.com, Don Penney don.penney@windriver.com, Saul Wold sgw@linux.intel.com
Zuul has posted comments on this change. ( https://review.opendev.org/704180 )
Change subject: Mellanox Driver: Disable use of kernel page pool functionality ......................................................................
Patch Set 1:
Build failed (check pipeline). For information on how to proceed, see http://docs.openstack.org/infra/manual/developers.html#automated-testing
- openstack-tox-docs https://zuul.opendev.org/t/openstack/build/cbee2ab21a7c4cf1b123e5da5299fd74 : SUCCESS in 4m 04s - openstack-tox-pep8 https://zuul.opendev.org/t/openstack/build/11fb173c3490482eb2902a46957e2caa : SUCCESS in 4m 52s - openstack-tox-linters https://zuul.opendev.org/t/openstack/build/1a614a32943143b6bdcbf7a145f05c9e : SUCCESS in 4m 18s - stx-integ-pylint https://zuul.opendev.org/t/openstack/build/c8704619a95443ee8a049985061bfb57 : FAILURE in 3m 24s
Thanks Al, problem is now gone.
-Jim
On 2020-01-28 8:53 a.m., Bailey, Henry Albert (Al) wrote:
Here you go Jim https://review.opendev.org/#/c/704566/
Al
-----Original Message----- From: Bailey, Henry Albert (Al) [mailto:Al.Bailey@windriver.com] Sent: Tuesday, January 28, 2020 8:35 AM To: Somerville, Jim; starlingx Subject: Re: [Starlingx-discuss] stx-integ-pylint failure due to python 2 vs. 3
A new libvirt-python (6.0.0) was released on Jan 23rd https://pypi.org/project/libvirt-python/#history
and it likely only supports py3
I will look into it. Probably just need an upper constraint.
Al
-----Original Message----- From: Jim Somerville [mailto:jim.somerville@windriver.com] Sent: Monday, January 27, 2020 5:57 PM To: starlingx Subject: [Starlingx-discuss] stx-integ-pylint failure due to python 2 vs. 3
Hi Folks,
Problem (branch master):
- stx-integ-pylint
https://zuul.opendev.org/t/openstack/build/c8704619a95443ee8a049985061bfb57 : FAILURE in 3m 24s
is due to libvirt-python needing python 3 instead of 2, is nothing related to my change.
Anyone know how to get this fixed? CentOS 8 folks, any ideas?
Thanks,
-Jim
-------- Forwarded Message -------- Subject: Change in starlingx/integ[master]: Mellanox Driver: Disable use of kernel page pool functionality Date: Mon, 27 Jan 2020 17:39:36 +0000 From: Zuul (Code Review) review@openstack.org To: Jim Somerville jim.somerville@windriver.com CC: Victor Manuel Rodriguez Bahena vm.rod25@gmail.com, Robin Lu bin1.lu@intel.com, Brent Rowsell brent.rowsell@windriver.com, Steven Webster steven.webster@windriver.com, Scott Little scott.little@windriver.com, Ghada Khalil ghada.khalil@windriver.com, Wendy Mitchell wendy.mitchell@windriver.com, Don Penney don.penney@windriver.com, Saul Wold sgw@linux.intel.com
Zuul has posted comments on this change. ( https://review.opendev.org/704180 )
Change subject: Mellanox Driver: Disable use of kernel page pool functionality ......................................................................
Patch Set 1:
Build failed (check pipeline). For information on how to proceed, see http://docs.openstack.org/infra/manual/developers.html#automated-testing
- openstack-tox-docs
https://zuul.opendev.org/t/openstack/build/cbee2ab21a7c4cf1b123e5da5299fd74 : SUCCESS in 4m 04s
- openstack-tox-pep8
https://zuul.opendev.org/t/openstack/build/11fb173c3490482eb2902a46957e2caa : SUCCESS in 4m 52s
- openstack-tox-linters
https://zuul.opendev.org/t/openstack/build/1a614a32943143b6bdcbf7a145f05c9e : SUCCESS in 4m 18s
- stx-integ-pylint
https://zuul.opendev.org/t/openstack/build/c8704619a95443ee8a049985061bfb57 : FAILURE in 3m 24s
On 2020-01-28 8:53 a.m., Bailey, Henry Albert (Al) wrote:
Here you go Jim https://review.opendev.org/#/c/704566/
Hi Al,
Is it safe to backport that to r/2.0 and r/3.0?
-Jim
Al
-----Original Message----- From: Bailey, Henry Albert (Al) [mailto:Al.Bailey@windriver.com] Sent: Tuesday, January 28, 2020 8:35 AM To: Somerville, Jim; starlingx Subject: Re: [Starlingx-discuss] stx-integ-pylint failure due to python 2 vs. 3
A new libvirt-python (6.0.0) was released on Jan 23rd https://pypi.org/project/libvirt-python/#history
and it likely only supports py3
I will look into it. Probably just need an upper constraint.
Al
-----Original Message----- From: Jim Somerville [mailto:jim.somerville@windriver.com] Sent: Monday, January 27, 2020 5:57 PM To: starlingx Subject: [Starlingx-discuss] stx-integ-pylint failure due to python 2 vs. 3
Hi Folks,
Problem (branch master):
- stx-integ-pylint
https://zuul.opendev.org/t/openstack/build/c8704619a95443ee8a049985061bfb57 : FAILURE in 3m 24s
is due to libvirt-python needing python 3 instead of 2, is nothing related to my change.
Anyone know how to get this fixed? CentOS 8 folks, any ideas?
Thanks,
-Jim
-------- Forwarded Message -------- Subject: Change in starlingx/integ[master]: Mellanox Driver: Disable use of kernel page pool functionality Date: Mon, 27 Jan 2020 17:39:36 +0000 From: Zuul (Code Review) review@openstack.org To: Jim Somerville jim.somerville@windriver.com CC: Victor Manuel Rodriguez Bahena vm.rod25@gmail.com, Robin Lu bin1.lu@intel.com, Brent Rowsell brent.rowsell@windriver.com, Steven Webster steven.webster@windriver.com, Scott Little scott.little@windriver.com, Ghada Khalil ghada.khalil@windriver.com, Wendy Mitchell wendy.mitchell@windriver.com, Don Penney don.penney@windriver.com, Saul Wold sgw@linux.intel.com
Zuul has posted comments on this change. ( https://review.opendev.org/704180 )
Change subject: Mellanox Driver: Disable use of kernel page pool functionality ......................................................................
Patch Set 1:
Build failed (check pipeline). For information on how to proceed, see http://docs.openstack.org/infra/manual/developers.html#automated-testing
- openstack-tox-docs
https://zuul.opendev.org/t/openstack/build/cbee2ab21a7c4cf1b123e5da5299fd74 : SUCCESS in 4m 04s
- openstack-tox-pep8
https://zuul.opendev.org/t/openstack/build/11fb173c3490482eb2902a46957e2caa : SUCCESS in 4m 52s
- openstack-tox-linters
https://zuul.opendev.org/t/openstack/build/1a614a32943143b6bdcbf7a145f05c9e : SUCCESS in 4m 18s
- stx-integ-pylint
https://zuul.opendev.org/t/openstack/build/c8704619a95443ee8a049985061bfb57 : FAILURE in 3m 24s
It should be fine to cherry pick to 3.0 I am not sure if 2.0 would be a clean pick (we renamed repos at some point)
Al
-----Original Message----- From: Jim Somerville [mailto:jim.somerville@windriver.com] Sent: Thursday, January 30, 2020 12:19 PM To: Bailey, Henry Albert (Al); starlingx Subject: Re: [Starlingx-discuss] stx-integ-pylint failure due to python 2 vs. 3
On 2020-01-28 8:53 a.m., Bailey, Henry Albert (Al) wrote:
Here you go Jim https://review.opendev.org/#/c/704566/
Hi Al,
Is it safe to backport that to r/2.0 and r/3.0?
-Jim
Al
-----Original Message----- From: Bailey, Henry Albert (Al) [mailto:Al.Bailey@windriver.com] Sent: Tuesday, January 28, 2020 8:35 AM To: Somerville, Jim; starlingx Subject: Re: [Starlingx-discuss] stx-integ-pylint failure due to python 2 vs. 3
A new libvirt-python (6.0.0) was released on Jan 23rd https://pypi.org/project/libvirt-python/#history
and it likely only supports py3
I will look into it. Probably just need an upper constraint.
Al
-----Original Message----- From: Jim Somerville [mailto:jim.somerville@windriver.com] Sent: Monday, January 27, 2020 5:57 PM To: starlingx Subject: [Starlingx-discuss] stx-integ-pylint failure due to python 2 vs. 3
Hi Folks,
Problem (branch master):
- stx-integ-pylint
https://zuul.opendev.org/t/openstack/build/c8704619a95443ee8a049985061bfb57 : FAILURE in 3m 24s
is due to libvirt-python needing python 3 instead of 2, is nothing related to my change.
Anyone know how to get this fixed? CentOS 8 folks, any ideas?
Thanks,
-Jim
-------- Forwarded Message -------- Subject: Change in starlingx/integ[master]: Mellanox Driver: Disable use of kernel page pool functionality Date: Mon, 27 Jan 2020 17:39:36 +0000 From: Zuul (Code Review) review@openstack.org To: Jim Somerville jim.somerville@windriver.com CC: Victor Manuel Rodriguez Bahena vm.rod25@gmail.com, Robin Lu bin1.lu@intel.com, Brent Rowsell brent.rowsell@windriver.com, Steven Webster steven.webster@windriver.com, Scott Little scott.little@windriver.com, Ghada Khalil ghada.khalil@windriver.com, Wendy Mitchell wendy.mitchell@windriver.com, Don Penney don.penney@windriver.com, Saul Wold sgw@linux.intel.com
Zuul has posted comments on this change. ( https://review.opendev.org/704180 )
Change subject: Mellanox Driver: Disable use of kernel page pool functionality ......................................................................
Patch Set 1:
Build failed (check pipeline). For information on how to proceed, see http://docs.openstack.org/infra/manual/developers.html#automated-testing
- openstack-tox-docs
https://zuul.opendev.org/t/openstack/build/cbee2ab21a7c4cf1b123e5da5299fd74 : SUCCESS in 4m 04s
- openstack-tox-pep8
https://zuul.opendev.org/t/openstack/build/11fb173c3490482eb2902a46957e2caa : SUCCESS in 4m 52s
- openstack-tox-linters
https://zuul.opendev.org/t/openstack/build/1a614a32943143b6bdcbf7a145f05c9e : SUCCESS in 4m 18s
- stx-integ-pylint
https://zuul.opendev.org/t/openstack/build/c8704619a95443ee8a049985061bfb57 : FAILURE in 3m 24s
On 2020-01-30 12:36 p.m., Bailey, Henry Albert (Al) wrote:
It should be fine to cherry pick to 3.0 I am not sure if 2.0 would be a clean pick (we renamed repos at some point)
I attempted the 2.0 cherry pick but it fails with a strange invocation error in the zuul check of stx-integ-pylint
https://review.opendev.org/#/c/705077/
Possible chicken and egg issue?
-Jim
Al
-----Original Message----- From: Jim Somerville [mailto:jim.somerville@windriver.com] Sent: Thursday, January 30, 2020 12:19 PM To: Bailey, Henry Albert (Al); starlingx Subject: Re: [Starlingx-discuss] stx-integ-pylint failure due to python 2 vs. 3
On 2020-01-28 8:53 a.m., Bailey, Henry Albert (Al) wrote:
Here you go Jim https://review.opendev.org/#/c/704566/
Hi Al,
Is it safe to backport that to r/2.0 and r/3.0?
-Jim
Al
-----Original Message----- From: Bailey, Henry Albert (Al) [mailto:Al.Bailey@windriver.com] Sent: Tuesday, January 28, 2020 8:35 AM To: Somerville, Jim; starlingx Subject: Re: [Starlingx-discuss] stx-integ-pylint failure due to python 2 vs. 3
A new libvirt-python (6.0.0) was released on Jan 23rd https://pypi.org/project/libvirt-python/#history
and it likely only supports py3
I will look into it. Probably just need an upper constraint.
Al
-----Original Message----- From: Jim Somerville [mailto:jim.somerville@windriver.com] Sent: Monday, January 27, 2020 5:57 PM To: starlingx Subject: [Starlingx-discuss] stx-integ-pylint failure due to python 2 vs. 3
Hi Folks,
Problem (branch master):
- stx-integ-pylint
https://zuul.opendev.org/t/openstack/build/c8704619a95443ee8a049985061bfb57 : FAILURE in 3m 24s
is due to libvirt-python needing python 3 instead of 2, is nothing related to my change.
Anyone know how to get this fixed? CentOS 8 folks, any ideas?
Thanks,
-Jim
-------- Forwarded Message -------- Subject: Change in starlingx/integ[master]: Mellanox Driver: Disable use of kernel page pool functionality Date: Mon, 27 Jan 2020 17:39:36 +0000 From: Zuul (Code Review) review@openstack.org To: Jim Somerville jim.somerville@windriver.com CC: Victor Manuel Rodriguez Bahena vm.rod25@gmail.com, Robin Lu bin1.lu@intel.com, Brent Rowsell brent.rowsell@windriver.com, Steven Webster steven.webster@windriver.com, Scott Little scott.little@windriver.com, Ghada Khalil ghada.khalil@windriver.com, Wendy Mitchell wendy.mitchell@windriver.com, Don Penney don.penney@windriver.com, Saul Wold sgw@linux.intel.com
Zuul has posted comments on this change. ( https://review.opendev.org/704180 )
Change subject: Mellanox Driver: Disable use of kernel page pool functionality ......................................................................
Patch Set 1:
Build failed (check pipeline). For information on how to proceed, see http://docs.openstack.org/infra/manual/developers.html#automated-testing
- openstack-tox-docs
https://zuul.opendev.org/t/openstack/build/cbee2ab21a7c4cf1b123e5da5299fd74 : SUCCESS in 4m 04s
- openstack-tox-pep8
https://zuul.opendev.org/t/openstack/build/11fb173c3490482eb2902a46957e2caa : SUCCESS in 4m 52s
- openstack-tox-linters
https://zuul.opendev.org/t/openstack/build/1a614a32943143b6bdcbf7a145f05c9e : SUCCESS in 4m 18s
- stx-integ-pylint
https://zuul.opendev.org/t/openstack/build/c8704619a95443ee8a049985061bfb57 : FAILURE in 3m 24s
I amended your cherry-pick review for the 2.0 branch. It should pass now.
Al
-----Original Message----- From: Jim Somerville [mailto:jim.somerville@windriver.com] Sent: Thursday, January 30, 2020 1:43 PM To: Bailey, Henry Albert (Al); starlingx Subject: Re: [Starlingx-discuss] stx-integ-pylint failure due to python 2 vs. 3
On 2020-01-30 12:36 p.m., Bailey, Henry Albert (Al) wrote:
It should be fine to cherry pick to 3.0 I am not sure if 2.0 would be a clean pick (we renamed repos at some point)
I attempted the 2.0 cherry pick but it fails with a strange invocation error in the zuul check of stx-integ-pylint
https://review.opendev.org/#/c/705077/
Possible chicken and egg issue?
-Jim
Al
-----Original Message----- From: Jim Somerville [mailto:jim.somerville@windriver.com] Sent: Thursday, January 30, 2020 12:19 PM To: Bailey, Henry Albert (Al); starlingx Subject: Re: [Starlingx-discuss] stx-integ-pylint failure due to python 2 vs. 3
On 2020-01-28 8:53 a.m., Bailey, Henry Albert (Al) wrote:
Here you go Jim https://review.opendev.org/#/c/704566/
Hi Al,
Is it safe to backport that to r/2.0 and r/3.0?
-Jim
Al
-----Original Message----- From: Bailey, Henry Albert (Al) [mailto:Al.Bailey@windriver.com] Sent: Tuesday, January 28, 2020 8:35 AM To: Somerville, Jim; starlingx Subject: Re: [Starlingx-discuss] stx-integ-pylint failure due to python 2 vs. 3
A new libvirt-python (6.0.0) was released on Jan 23rd https://pypi.org/project/libvirt-python/#history
and it likely only supports py3
I will look into it. Probably just need an upper constraint.
Al
-----Original Message----- From: Jim Somerville [mailto:jim.somerville@windriver.com] Sent: Monday, January 27, 2020 5:57 PM To: starlingx Subject: [Starlingx-discuss] stx-integ-pylint failure due to python 2 vs. 3
Hi Folks,
Problem (branch master):
- stx-integ-pylint
https://zuul.opendev.org/t/openstack/build/c8704619a95443ee8a049985061bfb57 : FAILURE in 3m 24s
is due to libvirt-python needing python 3 instead of 2, is nothing related to my change.
Anyone know how to get this fixed? CentOS 8 folks, any ideas?
Thanks,
-Jim
-------- Forwarded Message -------- Subject: Change in starlingx/integ[master]: Mellanox Driver: Disable use of kernel page pool functionality Date: Mon, 27 Jan 2020 17:39:36 +0000 From: Zuul (Code Review) review@openstack.org To: Jim Somerville jim.somerville@windriver.com CC: Victor Manuel Rodriguez Bahena vm.rod25@gmail.com, Robin Lu bin1.lu@intel.com, Brent Rowsell brent.rowsell@windriver.com, Steven Webster steven.webster@windriver.com, Scott Little scott.little@windriver.com, Ghada Khalil ghada.khalil@windriver.com, Wendy Mitchell wendy.mitchell@windriver.com, Don Penney don.penney@windriver.com, Saul Wold sgw@linux.intel.com
Zuul has posted comments on this change. ( https://review.opendev.org/704180 )
Change subject: Mellanox Driver: Disable use of kernel page pool functionality ......................................................................
Patch Set 1:
Build failed (check pipeline). For information on how to proceed, see http://docs.openstack.org/infra/manual/developers.html#automated-testing
- openstack-tox-docs
https://zuul.opendev.org/t/openstack/build/cbee2ab21a7c4cf1b123e5da5299fd74 : SUCCESS in 4m 04s
- openstack-tox-pep8
https://zuul.opendev.org/t/openstack/build/11fb173c3490482eb2902a46957e2caa : SUCCESS in 4m 52s
- openstack-tox-linters
https://zuul.opendev.org/t/openstack/build/1a614a32943143b6bdcbf7a145f05c9e : SUCCESS in 4m 18s
- stx-integ-pylint
https://zuul.opendev.org/t/openstack/build/c8704619a95443ee8a049985061bfb57 : FAILURE in 3m 24s
participants (2)
-
Bailey, Henry Albert (Al)
-
Jim Somerville