[Starlingx-discuss] Question about neutron connectivity-test error
Hi When I run command "neutron providernet-connectivity-test-list" I received an error --> "Provider network testing is not supported in this configuration.". Is there any specific configuration that I should apply to my controller or provider network? http://paste.openstack.org/show/732446/ Regards, José
-----Original Message----- From: Perez Carranza, Jose Sent: Tuesday, October 16, 2018 2:27 PM To: starlingx-discuss@lists.starlingx.io Subject: Help on shared vCPU usage
Hi
I'm trying to execute scenario 206 [1] that indicates that I need to launch instance with a flavor with "hw:wrs:shared_vcpu", I created a flavor with "hw:wrs:shared_vcpu=1" but at the moment of create the instance below error is displayed.. Is there any extra config or parameter that I need to apply before creating the instance ?
Error (Duplex Bare-Metal): ====== No valid host was found. There are not enough hosts available. controller-0: (NUMATopologyFilter) Shared vCPU not enabled on host cell 1, required by instance cell 0, Shared vCPU not enabled on host cell 0, required by instance cell 0, controller-1: (NUM =====
1- https://wiki.openstack.org/wiki/StarlingX/stx.2018.10_Testplan_Instructions
Regards, José
Hello José, The provider network audits are disabled by default in StarlingX since there is no corresponding agent driver for OVS-DPDK. Therefore the audits cannot be supported until an associated driver for OVS-DPDK is developed. Regards, Matt
-----Original Message----- From: Perez Carranza, Jose [mailto:jose.perez.carranza@intel.com] Sent: Thursday, October 18, 2018 4:39 PM To: 'starlingx-discuss@lists.starlingx.io' Subject: [Starlingx-discuss] Question about neutron connectivity-test error
Hi
When I run command "neutron providernet-connectivity-test-list" I received an error --> "Provider network testing is not supported in this configuration.". Is there any specific configuration that I should apply to my controller or provider network?
http://paste.openstack.org/show/732446/
Regards, José
-----Original Message----- From: Perez Carranza, Jose Sent: Tuesday, October 16, 2018 2:27 PM To: starlingx-discuss@lists.starlingx.io Subject: Help on shared vCPU usage
Hi
I'm trying to execute scenario 206 [1] that indicates that I need to launch instance with a flavor with "hw:wrs:shared_vcpu", I created a flavor with "hw:wrs:shared_vcpu=1" but at the moment of create the instance below error is displayed.. Is there any extra config or parameter that I need to apply before creating the instance ?
Error (Duplex Bare-Metal): ====== No valid host was found. There are not enough hosts available. controller- 0: (NUMATopologyFilter) Shared vCPU not enabled on host cell 1, required by instance cell 0, Shared vCPU not enabled on host cell 0, required by instance cell 0, controller-1: (NUM =====
1- https://wiki.openstack.org/wiki/StarlingX/stx.2018.10_Testplan_Instructions
Regards, José
_______________________________________________ Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss
participants (2)
-
Perez Carranza, Jose
-
Peters, Matt