[Starlingx-discuss] STX 6.0 AIO Duplex
while rolling out a STX 6.0 aio duplex from a master iso , installed fine, provisdions fine, then going through the configuration i encounter # Create Data Networks that vswitch 'data' interfaces will be connected to DATANET0='datanet0' DATANET1='datanet1' # Assign Data Networks to Data Interfaces system interface-datanetwork-assign ${NODE} <data0-if-uuid> ${DATANET0} system interface-datanetwork-assign ${NODE} <data1-if-uuid> ${DATANET1} These last two commands appear to do nothing and provide the error no datanetworks found So i have to ask, is this document right ? -- Sent with Vivaldi Mail. Download Vivaldi for free at vivaldi.com
Hi, There should a step in the "Create Data Networks that vswitch 'data' interfaces will be connected to" in which the data networks are actually created. For example: https://docs.starlingx.io/deploy_install_guides/r6_release/bare_metal/aio_si... " # Create Data Networks that vswitch 'data' interfaces will be connected to DATANET0='datanet0' DATANET1='datanet1' system datanetwork-add ${DATANET0} vlan system datanetwork-add ${DATANET1} vlan " You can view the available data networks with system datanetwork-list Steve
-----Original Message----- From: Embedded Devel <lists@optimcloud.com> Sent: Monday, September 27, 2021 6:34 AM To: starlingx-discuss@lists.starlingx.io Subject: [Starlingx-discuss] STX 6.0 AIO Duplex
[Please note: This e-mail is from an EXTERNAL e-mail address]
while rolling out a STX 6.0 aio duplex from a master iso , installed fine, provisdions fine, then going through the configuration i encounter
# Create Data Networks that vswitch 'data' interfaces will be connected to DATANET0='datanet0' DATANET1='datanet1'
# Assign Data Networks to Data Interfaces system interface-datanetwork- assign ${NODE} <data0-if-uuid> ${DATANET0} system interface-datanetwork- assign ${NODE} <data1-if-uuid> ${DATANET1}
These last two commands appear to do nothing and provide the error no datanetworks found
So i have to ask, is this document right ?
-- Sent with Vivaldi Mail. Download Vivaldi for free at vivaldi.com
_______________________________________________ Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss
okay really not sure how i missed it on controller-0 but seems its working. [sysadmin@controller-0 ~(keystone_admin)]$ system datanetwork-list +--------------------------------------+----------+--------------+------+ | uuid | name | network_type | mtu | +--------------------------------------+----------+--------------+------+ | b03e45f7-f7f7-48c5-a9b7-e28cc9c38f13 | datanet0 | vlan | 1500 | | 5856facc-94ce-4b70-ad12-61718a1ece11 | datanet1 | vlan | 1500 | +--------------------------------------+----------+--------------+------+ [sysadmin@controller-0 ~(keystone_admin)]$ system interface-datanetwork-list controller-0 +--------------+--------------------------------------+--------+------------------+ | hostname | uuid | ifname | datanetwork_name | +--------------+--------------------------------------+--------+------------------+ | controller-0 | 03693bf0-1354-4ba3-bae8-f3eef3b4a6a8 | data0 | datanet0 | | controller-0 | 530a22f1-32d8-412b-88f2-3dae8fc71e64 | data1 | datanet1 | +--------------+--------------------------------------+--------+------------------+ [sysadmin@controller-0 ~(keystone_admin)]$ system interface-datanetwork-list controller-1 +--------------+--------------------------------------+--------+------------------+ | hostname | uuid | ifname | datanetwork_name | +--------------+--------------------------------------+--------+------------------+ | controller-1 | b031d80b-7dbb-48e5-b947-38cfb712b006 | data1 | datanet1 | | controller-1 | b56d5102-a4a0-4d23-a188-da6743fdc9ec | data0 | datanet0 | +--------------+--------------------------------------+--------+------------------+ On Thursday 30 September 2021 01:28:37 AM (+07:00), Webster, Steven wrote:
Hi,
There should a step in the "Create Data Networks that vswitch 'data' interfaces will be connected to" in which the data networks are actually created.
For example:
https://docs.starlingx.io/deploy_install_guides/r6_release/bare_metal/aio_si...
" # Create Data Networks that vswitch 'data' interfaces will be connected
to
DATANET0='datanet0' DATANET1='datanet1' system datanetwork-add ${DATANET0} vlan system datanetwork-add ${DATANET1} vlan "
You can view the available data networks with system datanetwork-list
Steve
-----Original Message----- From: Embedded Devel <lists@optimcloud.com> Sent: Monday, September 27, 2021 6:34 AM To: starlingx-discuss@lists.starlingx.io Subject: [Starlingx-discuss] STX 6.0 AIO Duplex
[Please note: This e-mail is from an EXTERNAL e-mail address]
while rolling out a STX 6.0 aio duplex from a master iso , installed fine, provisdions fine, then going through the configuration i encounter
# Create Data Networks that vswitch 'data' interfaces will be connected to DATANET0='datanet0' DATANET1='datanet1'
# Assign Data Networks to Data Interfaces system interface-datanetwork- assign ${NODE} <data0-if-uuid> ${DATANET0} system interface-datanetwork- assign ${NODE} <data1-if-uuid> ${DATANET1}
These last two commands appear to do nothing and provide the error no datanetworks found
So i have to ask, is this document right ?
-- Sent with Vivaldi Mail. Download Vivaldi for free at vivaldi.com
_______________________________________________ Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss
_______________________________________________ Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss
-- Sent with Vivaldi Mail. Download Vivaldi for free at vivaldi.com
participants (2)
-
Embedded Devel
-
Webster, Steven