All, I am informing you that, Fault Management(FM) has been decoupled from stx-config as of August 17, 2018. Subsequently, new FM DB, API service and client were created under stx-fault repo. Thus, all fault management CLI were removed from system shell and were added to fm shell. The following CLI commands have been moved from system shell to fm shell: alarm-delete Delete an active alarm. alarm-list List all active alarms. alarm-show Show an active alarm. alarm-summary Show a summary of active alarms. event-list List event logs. event-show Show an event log. event-suppress Suppress specified Event ID's. event-suppress-list List Suppressed Event ID's event-unsuppress Unsuppress specified Event ID's. event-unsuppress-all Unsuppress all Event ID's. For example: "system alarm-list" changes to "fm alarm-list" "system event-list" changes to " fm event-list" "system alarm-summary" changes to "fm alarm-summary" Since aforementioned changes also affect Horizon GUI, Horizon change is also required. The required Horizon change is waiting for Eddie Ramirez to enable the stx-gui so that the change can be integrated. Regards, Tao Liu, Member of Technical Staff, Engineering,, Wind River direct 613.963.1413 fax: 613.492.7870 skype: tao_at_home 350 Terry Fox Drive, Suite 200, Ottawa, Ontario, K2K 2W5