+starlingx-discuss These should always go to the -discuss list please. On 5/21/20 12:10 PM, Scott Little wrote:

investigating this now

Scott

On 2020-05-21 2:58 p.m., Jascanu, Nicolae wrote:

...

Hi,

I’ve attached the console output. The one from 16 is the good one.

Regards,

Nicolae Jascanu, Ph.D.

*TSD Software Engineer*

intel-logo

*Internet Of Things Group*

*Galati, Romania*

*From:* Jascanu, Nicolae *Sent:* Thursday, May 21, 2020 11:44 *To:* Austin Sun (austin.sun@intel.com) <austin.sun@intel.com>; Lin, Shuicheng <shuicheng.lin@intel.com> *Subject:* RE: StarlingX - fails at setup

Hi Austin,

Please find attached the console output for the good image from 16 and the bad image from 20.

We will try now to boot the bad image from 20 directly from server.

Regards,

Nicolae Jascanu, Ph.D.

*TSD Software Engineer*

intel-logo

*Internet Of Things Group*

*Galati, Romania*

*From:* Jascanu, Nicolae *Sent:* Thursday, May 21, 2020 10:41 *To:* Austin Sun (austin.sun@intel.com <mailto:austin.sun@intel.com>) <austin.sun@intel.com <mailto:austin.sun@intel.com>>; Lin, Shuicheng <shuicheng.lin@intel.com <mailto:shuicheng.lin@intel.com>> *Subject:* FW: StarlingX - fails at setup

Regards,

Nicolae Jascanu, Ph.D.

*TSD Software Engineer*

intel-logo

*Internet Of Things Group*

*Galati, Romania*

*From:* Jascanu, Nicolae *Sent:* Wednesday, May 20, 2020 21:33 *To:* Wold, Saul <saul.wold@intel.com <mailto:saul.wold@intel.com>>; Miller, Frank <Frank.Miller@windriver.com <mailto:Frank.Miller@windriver.com>>; Scott Little <scott.little@windriver.com <mailto:scott.little@windriver.com>> *Subject:* StarlingX - fails at setup

Hi,

An all baremetal configurations the setup fails with the same error. Please find attached the full console log from baremetal simplex.

[  200.397941] dracut-initqueue[3884]: Warning: dracut-initqueue timeout - starting timeout scripts

[  200.906800] dracut-initqueue[3884]: Warning: dracut-initqueue timeout - starting timeout scripts

[  201.4Warning: /dev/root does not exist

Generating "/run/initramfs/rdsosreport.txt"

Entering emergency mode. Exit the shell to continue.

Type "journalctl" to view system logs.

You might want to save "/run/initramfs/rdsosreport.txt" to a USB stick or /boot

after mounting them and attach it to a bug report.

Regards,

Nicolae Jascanu, Ph.D.

*TSD Software Engineer*

intel-logo

*Internet Of Things Group*

*Galati, Romania*