[Starlingx-discuss] building ceph 13.2.0
Hi: I re-setup new building environment, and can successfully build starlingx image. Based on this new environments, I directly use ceph 13.2.0 to replace ceph 10.2.0, build-pkgs ceph, then directly run "build-pkgs ceph ". Build-std.log show the following error: 02:01:23 Error: No Package found for CUnit-devel 02:01:23 Error: No Package found for devtoolset-7-gcc-c++ 02:01:23 Error: No Package found for jq 02:01:23 Error: No Package found for libbabeltrace-devel 02:01:23 Error: No Package found for liboath-devel 02:01:23 Error: No Package found for lttng-ust-devel 02:01:23 Error: No Package found for lz4-devel >= 1.7 02:01:23 Error: No Package found for python34-Cython 02:01:23 Error: No Package found for python34-devel 02:01:23 Error: No Package found for python34-setuptools 02:01:23 Error: No Package found for sharutils So, when i check ceph.spec file of 13.2.0, find some new BuildRequests, for example: BuildRequires: CUnit-devel BuildRequires: devtoolset-7-gcc-c++ ...... ...... ...... My methods is as following: Step 1 : wget get corresponding rpm, then put it into mirror's corresponding folder. Step 2: create package link, namely : ln -sf xxxx yyyy Then, when i run build-pkgs ceph again, found that one deps CUnit-devel is resolved, but other package still can't be found. Build-std.log is as following: 02:01:23 Error: No Package found for devtoolset-7-gcc-c++ 02:01:23 Error: No Package found for jq 02:01:23 Error: No Package found for libbabeltrace-devel 02:01:23 Error: No Package found for liboath-devel 02:01:23 Error: No Package found for lttng-ust-devel 02:01:23 Error: No Package found for lz4-devel >= 1.7 02:01:23 Error: No Package found for python34-Cython 02:01:23 Error: No Package found for python34-devel 02:01:23 Error: No Package found for python34-setuptools 02:01:23 Error: No Package found for sharutils So, I want to ask whether this method is correct ? Based on this method, why one package can be resolved and other package can't be found ? Thanks Dehao
Hi Dehao, Please have a try with "build-pkgs" after "ln -sf xxxx yyyy". The reason is the build system will search the package from the repodata, and "build-pkgs" will add the new package to the repodata. Best Regards Shuicheng From: Shang, Dehao [mailto:dehao.shang@intel.com] Sent: Sunday, September 9, 2018 9:13 PM To: starlingx-discuss@lists.starlingx.io Subject: [Starlingx-discuss] building ceph 13.2.0 Hi: I re-setup new building environment, and can successfully build starlingx image. Based on this new environments, I directly use ceph 13.2.0 to replace ceph 10.2.0, build-pkgs ceph, then directly run "build-pkgs ceph ". Build-std.log show the following error: 02:01:23 Error: No Package found for CUnit-devel 02:01:23 Error: No Package found for devtoolset-7-gcc-c++ 02:01:23 Error: No Package found for jq 02:01:23 Error: No Package found for libbabeltrace-devel 02:01:23 Error: No Package found for liboath-devel 02:01:23 Error: No Package found for lttng-ust-devel 02:01:23 Error: No Package found for lz4-devel >= 1.7 02:01:23 Error: No Package found for python34-Cython 02:01:23 Error: No Package found for python34-devel 02:01:23 Error: No Package found for python34-setuptools 02:01:23 Error: No Package found for sharutils So, when i check ceph.spec file of 13.2.0, find some new BuildRequests, for example: BuildRequires: CUnit-devel BuildRequires: devtoolset-7-gcc-c++ ...... ...... ...... My methods is as following: Step 1 : wget get corresponding rpm, then put it into mirror's corresponding folder. Step 2: create package link, namely : ln -sf xxxx yyyy Then, when i run build-pkgs ceph again, found that one deps CUnit-devel is resolved, but other package still can't be found. Build-std.log is as following: 02:01:23 Error: No Package found for devtoolset-7-gcc-c++ 02:01:23 Error: No Package found for jq 02:01:23 Error: No Package found for libbabeltrace-devel 02:01:23 Error: No Package found for liboath-devel 02:01:23 Error: No Package found for lttng-ust-devel 02:01:23 Error: No Package found for lz4-devel >= 1.7 02:01:23 Error: No Package found for python34-Cython 02:01:23 Error: No Package found for python34-devel 02:01:23 Error: No Package found for python34-setuptools 02:01:23 Error: No Package found for sharutils So, I want to ask whether this method is correct ? Based on this method, why one package can be resolved and other package can't be found ? Thanks Dehao
Hi, Shuicheng: I have run "build-pkgs", but error log still showed that can't found corresponding package. Thanks Dehao build-pkgs Log: 16:40:07 Error: No Package found for devtoolset-7-gcc-c++ 16:40:07 Error: No Package found for jq 16:40:07 Error: No Package found for libbabeltrace-devel 16:40:07 Error: No Package found for liboath-devel 16:40:07 Error: No Package found for lttng-ust-devel 16:40:07 Error: No Package found for lz4-devel >= 1.7 16:40:07 Error: No Package found for python34-Cython 16:40:07 Error: No Package found for python34-devel 16:40:07 Error: No Package found for python34-setuptools 16:40:07 Error: No Package found for sharutils 16:40:07 16:40:07 End build on 'b0': /localdisk/loadbuild/dehao/starlingx/std/rpmbuild/SRPMS/ceph-13.2.0-0.el7.tis.1.src.rpm 16:40:07 Error building ceph-13.2.0-0.el7.tis.1.src.rpm on 'b0'. 16:40:07 Will try to build again (if some other package will succeed). 16:40:07 ===== iteration 2 complete ===== 16:40:07 failed=['/localdisk/loadbuild/dehao/starlingx/std/rpmbuild/SRPMS/ceph-13.2.0-0.el7.tis.1.src.rpm'] 16:40:07 to_be_built=['/localdisk/loadbuild/dehao/starlingx/std/rpmbuild/SRPMS/ceph-13.2.0-0.el7.tis.1.src.rpm'] 16:40:07 ===== [dehao@9f9456a3d92b cgcs-root]$ ls cgcs-centos-repo/Binary/x86_64/devtoolset-7-gcc-c++-7.3.1-5.10.el7.x86_64.rpm cgcs-centos-repo/Binary/x86_64/devtoolset-7-gcc-c++-7.3.1-5.10.el7.x86_64.rpm [dehao@9f9456a3d92b cgcs-root]$ ll cgcs-centos-repo/Binary/x86_64/devtoolset-7-gcc-c++-7.3.1-5.10.el7.x86_64.rpm lrwxrwxrwx 1 root root 102 Sep 8 20:11 cgcs-centos-repo/Binary/x86_64/devtoolset-7-gcc-c++-7.3.1-5.10.el7.x86_64.rpm -> /import/mirrors/CentOS/stx-r1/CentOS/pike/Binary/x86_64/devtoolset-7-gcc-c++-7.3.1-5.10.el7.x86_64.rpm [dehao@9f9456a3d92b cgcs-root]$ ll cgcs-centos-repo/Binary/x86_64/libbabeltrace-devel-1.2.4-3.el7.x86_64.rpm lrwxrwxrwx 1 root root 98 Sep 8 20:39 cgcs-centos-repo/Binary/x86_64/libbabeltrace-devel-1.2.4-3.el7.x86_64.rpm -> /import/mirrors/CentOS/stx-r1/CentOS/pike/Binary/x86_64/libbabeltrace-devel-1.2.4-3.el7.x86_64.rpm [dehao@9f9456a3d92b cgcs-root]$ ll cgcs-centos-repo/Binary/x86_64/lldpad-1.0.1-3.git036e314.el7.x86_64.rpm lrwxrwxrwx 1 dehao cgts 96 Sep 8 19:47 cgcs-centos-repo/Binary/x86_64/lldpad-1.0.1-3.git036e314.el7.x86_64.rpm -> /import/mirrors/CentOS/stx-r1/CentOS/pike/Binary/x86_64/lldpad-1.0.1-3.git036e314.el7.x86_64.rpm From: Lin, Shuicheng Sent: Monday, September 10, 2018 8:41 AM To: Shang, Dehao <dehao.shang@intel.com>; starlingx-discuss@lists.starlingx.io Subject: RE: [Starlingx-discuss] building ceph 13.2.0 Hi Dehao, Please have a try with "build-pkgs" after "ln -sf xxxx yyyy". The reason is the build system will search the package from the repodata, and "build-pkgs" will add the new package to the repodata. Best Regards Shuicheng From: Shang, Dehao [mailto:dehao.shang@intel.com] Sent: Sunday, September 9, 2018 9:13 PM To: starlingx-discuss@lists.starlingx.io<mailto:starlingx-discuss@lists.starlingx.io> Subject: [Starlingx-discuss] building ceph 13.2.0 Hi: I re-setup new building environment, and can successfully build starlingx image. Based on this new environments, I directly use ceph 13.2.0 to replace ceph 10.2.0, build-pkgs ceph, then directly run "build-pkgs ceph ". Build-std.log show the following error: 02:01:23 Error: No Package found for CUnit-devel 02:01:23 Error: No Package found for devtoolset-7-gcc-c++ 02:01:23 Error: No Package found for jq 02:01:23 Error: No Package found for libbabeltrace-devel 02:01:23 Error: No Package found for liboath-devel 02:01:23 Error: No Package found for lttng-ust-devel 02:01:23 Error: No Package found for lz4-devel >= 1.7 02:01:23 Error: No Package found for python34-Cython 02:01:23 Error: No Package found for python34-devel 02:01:23 Error: No Package found for python34-setuptools 02:01:23 Error: No Package found for sharutils So, when i check ceph.spec file of 13.2.0, find some new BuildRequests, for example: BuildRequires: CUnit-devel BuildRequires: devtoolset-7-gcc-c++ ...... ...... ...... My methods is as following: Step 1 : wget get corresponding rpm, then put it into mirror's corresponding folder. Step 2: create package link, namely : ln -sf xxxx yyyy Then, when i run build-pkgs ceph again, found that one deps CUnit-devel is resolved, but other package still can't be found. Build-std.log is as following: 02:01:23 Error: No Package found for devtoolset-7-gcc-c++ 02:01:23 Error: No Package found for jq 02:01:23 Error: No Package found for libbabeltrace-devel 02:01:23 Error: No Package found for liboath-devel 02:01:23 Error: No Package found for lttng-ust-devel 02:01:23 Error: No Package found for lz4-devel >= 1.7 02:01:23 Error: No Package found for python34-Cython 02:01:23 Error: No Package found for python34-devel 02:01:23 Error: No Package found for python34-setuptools 02:01:23 Error: No Package found for sharutils So, I want to ask whether this method is correct ? Based on this method, why one package can be resolved and other package can't be found ? Thanks Dehao
Hi, This is something that you might need to try inside mock. To go into mock run: $ cd /localdisk/loadbuild/<your-user>/<your-project>/std # First, copy the SRPM of ceph into mock $ mock -r <user>-<project>-tis-r5-pike-std.cfg –copyin <the-path-to-the-srpm> /tmp # I like to use /tmp but it could be whatever path you like. # Start a shell in mock $ mock -r <user>-<project>-tis-r5-pike-std.cfg --shell # the initial startup will install a set of default packages. # then try to build your srpm with rpmbuild $ cd /tmp; rpmbuild --rebuild <your-ceph>.src.rpm # Try to install missing dependencies with yum, here you can install the missing devtoolset-7-gcc-c++ package. # If you look into the /etc/yum.conf file you’ll see that the cgcs-centos-repo file is set as a repository served through a web server, you can see if the package is actually there. I hope this can help. -Erich From: "Shang, Dehao" <dehao.shang@intel.com> Date: Sunday, September 9, 2018 at 8:02 PM To: "Lin, Shuicheng" <shuicheng.lin@intel.com>, "starlingx-discuss@lists.starlingx.io" <starlingx-discuss@lists.starlingx.io> Subject: Re: [Starlingx-discuss] building ceph 13.2.0 Hi, Shuicheng: I have run “build-pkgs”, but error log still showed that can’t found corresponding package. Thanks Dehao build-pkgs Log: 16:40:07 Error: No Package found for devtoolset-7-gcc-c++ 16:40:07 Error: No Package found for jq 16:40:07 Error: No Package found for libbabeltrace-devel 16:40:07 Error: No Package found for liboath-devel 16:40:07 Error: No Package found for lttng-ust-devel 16:40:07 Error: No Package found for lz4-devel >= 1.7 16:40:07 Error: No Package found for python34-Cython 16:40:07 Error: No Package found for python34-devel 16:40:07 Error: No Package found for python34-setuptools 16:40:07 Error: No Package found for sharutils 16:40:07 16:40:07 End build on 'b0': /localdisk/loadbuild/dehao/starlingx/std/rpmbuild/SRPMS/ceph-13.2.0-0.el7.tis.1.src.rpm 16:40:07 Error building ceph-13.2.0-0.el7.tis.1.src.rpm on 'b0'. 16:40:07 Will try to build again (if some other package will succeed). 16:40:07 ===== iteration 2 complete ===== 16:40:07 failed=['/localdisk/loadbuild/dehao/starlingx/std/rpmbuild/SRPMS/ceph-13.2.0-0.el7.tis.1.src.rpm'] 16:40:07 to_be_built=['/localdisk/loadbuild/dehao/starlingx/std/rpmbuild/SRPMS/ceph-13.2.0-0.el7.tis.1.src.rpm'] 16:40:07 ===== [dehao@9f9456a3d92b cgcs-root]$ ls cgcs-centos-repo/Binary/x86_64/devtoolset-7-gcc-c++-7.3.1-5.10.el7.x86_64.rpm cgcs-centos-repo/Binary/x86_64/devtoolset-7-gcc-c++-7.3.1-5.10.el7.x86_64.rpm [dehao@9f9456a3d92b cgcs-root]$ ll cgcs-centos-repo/Binary/x86_64/devtoolset-7-gcc-c++-7.3.1-5.10.el7.x86_64.rpm lrwxrwxrwx 1 root root 102 Sep 8 20:11 cgcs-centos-repo/Binary/x86_64/devtoolset-7-gcc-c++-7.3.1-5.10.el7.x86_64.rpm -> /import/mirrors/CentOS/stx-r1/CentOS/pike/Binary/x86_64/devtoolset-7-gcc-c++-7.3.1-5.10.el7.x86_64.rpm [dehao@9f9456a3d92b cgcs-root]$ ll cgcs-centos-repo/Binary/x86_64/libbabeltrace-devel-1.2.4-3.el7.x86_64.rpm lrwxrwxrwx 1 root root 98 Sep 8 20:39 cgcs-centos-repo/Binary/x86_64/libbabeltrace-devel-1.2.4-3.el7.x86_64.rpm -> /import/mirrors/CentOS/stx-r1/CentOS/pike/Binary/x86_64/libbabeltrace-devel-1.2.4-3.el7.x86_64.rpm [dehao@9f9456a3d92b cgcs-root]$ ll cgcs-centos-repo/Binary/x86_64/lldpad-1.0.1-3.git036e314.el7.x86_64.rpm lrwxrwxrwx 1 dehao cgts 96 Sep 8 19:47 cgcs-centos-repo/Binary/x86_64/lldpad-1.0.1-3.git036e314.el7.x86_64.rpm -> /import/mirrors/CentOS/stx-r1/CentOS/pike/Binary/x86_64/lldpad-1.0.1-3.git036e314.el7.x86_64.rpm From: Lin, Shuicheng Sent: Monday, September 10, 2018 8:41 AM To: Shang, Dehao <dehao.shang@intel.com>; starlingx-discuss@lists.starlingx.io Subject: RE: [Starlingx-discuss] building ceph 13.2.0 Hi Dehao, Please have a try with “build-pkgs” after “ln –sf xxxx yyyy”. The reason is the build system will search the package from the repodata, and “build-pkgs” will add the new package to the repodata. Best Regards Shuicheng From: Shang, Dehao [mailto:dehao.shang@intel.com] Sent: Sunday, September 9, 2018 9:13 PM To: starlingx-discuss@lists.starlingx.io<mailto:starlingx-discuss@lists.starlingx.io> Subject: [Starlingx-discuss] building ceph 13.2.0 Hi: I re-setup new building environment, and can successfully build starlingx image. Based on this new environments, I directly use ceph 13.2.0 to replace ceph 10.2.0, build-pkgs ceph, then directly run “build-pkgs ceph ”. Build-std.log show the following error: 02:01:23 Error: No Package found for CUnit-devel 02:01:23 Error: No Package found for devtoolset-7-gcc-c++ 02:01:23 Error: No Package found for jq 02:01:23 Error: No Package found for libbabeltrace-devel 02:01:23 Error: No Package found for liboath-devel 02:01:23 Error: No Package found for lttng-ust-devel 02:01:23 Error: No Package found for lz4-devel >= 1.7 02:01:23 Error: No Package found for python34-Cython 02:01:23 Error: No Package found for python34-devel 02:01:23 Error: No Package found for python34-setuptools 02:01:23 Error: No Package found for sharutils So, when i check ceph.spec file of 13.2.0, find some new BuildRequests, for example: BuildRequires: CUnit-devel BuildRequires: devtoolset-7-gcc-c++ …… …… …… My methods is as following: Step 1 : wget get corresponding rpm, then put it into mirror’s corresponding folder. Step 2: create package link, namely : ln –sf xxxx yyyy Then, when i run build-pkgs ceph again, found that one deps CUnit-devel is resolved, but other package still can’t be found. Build-std.log is as following: 02:01:23 Error: No Package found for devtoolset-7-gcc-c++ 02:01:23 Error: No Package found for jq 02:01:23 Error: No Package found for libbabeltrace-devel 02:01:23 Error: No Package found for liboath-devel 02:01:23 Error: No Package found for lttng-ust-devel 02:01:23 Error: No Package found for lz4-devel >= 1.7 02:01:23 Error: No Package found for python34-Cython 02:01:23 Error: No Package found for python34-devel 02:01:23 Error: No Package found for python34-setuptools 02:01:23 Error: No Package found for sharutils So, I want to ask whether this method is correct ? Based on this method, why one package can be resolved and other package can’t be found ? Thanks Dehao
participants (3)
-
Cordoba Malibran, Erich
-
Lin, Shuicheng
-
Shang, Dehao