[Starlingx-discuss] StarlingX install question
Hi, I am trying to install StarlingX on virtual standard with controller storage configuration. I am following the steps mentioned in this document: https://docs.starlingx.io/deploy_install_guides/r3_release/virtual/controlle... I reached the step where 2 controllers and 2 workers are up and running. Now I am confused with "configure controller-1" step. https://docs.starlingx.io/deploy_install_guides/r3_release/virtual/controlle... I see an error while doing this step on controller-1: [image: image.png] I tried using sudo to repeat the step: [image: image.png] Can someone please help me with this step to proceed with the installation? Regards Abhijit
Forgot to mention that I tried doing this step to enter the admin mode, but the openrc script doesnt seem to exist on controller-1 [image: image.png] So I am not sure how to proceed. Please advise. ~Abhijit On Mon, Apr 6, 2020 at 11:44 AM Abhijit Deodhar <abhideodhar@gmail.com> wrote:
Hi,
I am trying to install StarlingX on virtual standard with controller storage configuration. I am following the steps mentioned in this document:
https://docs.starlingx.io/deploy_install_guides/r3_release/virtual/controlle...
I reached the step where 2 controllers and 2 workers are up and running. Now I am confused with "configure controller-1" step.
https://docs.starlingx.io/deploy_install_guides/r3_release/virtual/controlle...
I see an error while doing this step on controller-1:
[image: image.png]
I tried using sudo to repeat the step: [image: image.png]
Can someone please help me with this step to proceed with the installation?
Regards Abhijit
Hi Abhijit, Please try following commands on controller-0: source /etc/platform/openrc OAM_IF=enp2s1 system host-if-modify controller-1 $OAM_IF -c platform system interface-network-assign controller-1 $OAM_IF oam system interface-network-assign controller-1 mgmt0 cluster-host controller-1 is not configured at that point and system command normally be activated on active controller. Thanks, Shigeru From: Abhijit Deodhar <abhideodhar@gmail.com> Sent: Monday, April 6, 2020 3:25 PM To: starlingx-discuss@lists.starlingx.io Subject: Re: [Starlingx-discuss] StarlingX install question Forgot to mention that I tried doing this step to enter the admin mode, but the openrc script doesnt seem to exist on controller-1 So I am not sure how to proceed. Please advise. ~Abhijit On Mon, Apr 6, 2020 at 11:44 AM Abhijit Deodhar <mailto:abhideodhar@gmail.com> wrote: Hi, I am trying to install StarlingX on virtual standard with controller storage configuration. I am following the steps mentioned in this document: https://docs.starlingx.io/deploy_install_guides/r3_release/virtual/controlle... I reached the step where 2 controllers and 2 workers are up and running. Now I am confused with "configure controller-1" step. https://docs.starlingx.io/deploy_install_guides/r3_release/virtual/controlle... I see an error while doing this step on controller-1: I tried using sudo to repeat the step: Can someone please help me with this step to proceed with the installation? Regards Abhijit
Ok, I tried that step and it worked. But now I am hitting an issue at the next step: [image: image.png] How to get past this error or debug it? Thanks Abhijit On Mon, Apr 6, 2020 at 12:30 PM Yoshida, Shigeru < Shigeru.Yoshida@windriver.com> wrote:
Hi Abhijit,
Please try following commands on controller-0:
source /etc/platform/openrc OAM_IF=enp2s1 system host-if-modify controller-1 $OAM_IF -c platform system interface-network-assign controller-1 $OAM_IF oam system interface-network-assign controller-1 mgmt0 cluster-host
controller-1 is not configured at that point and system command normally be activated on active controller.
Thanks, Shigeru
From: Abhijit Deodhar <abhideodhar@gmail.com> Sent: Monday, April 6, 2020 3:25 PM To: starlingx-discuss@lists.starlingx.io Subject: Re: [Starlingx-discuss] StarlingX install question
Forgot to mention that I tried doing this step to enter the admin mode, but the openrc script doesnt seem to exist on controller-1
So I am not sure how to proceed.
Please advise.
~Abhijit
On Mon, Apr 6, 2020 at 11:44 AM Abhijit Deodhar <mailto: abhideodhar@gmail.com> wrote: Hi,
I am trying to install StarlingX on virtual standard with controller storage configuration. I am following the steps mentioned in this document:
https://docs.starlingx.io/deploy_install_guides/r3_release/virtual/controlle...
I reached the step where 2 controllers and 2 workers are up and running. Now I am confused with "configure controller-1" step.
https://docs.starlingx.io/deploy_install_guides/r3_release/virtual/controlle...
I see an error while doing this step on controller-1:
I tried using sudo to repeat the step:
Can someone please help me with this step to proceed with the installation?
Regards Abhijit
can someone please help me? Regards Abhijit On Mon, Apr 6, 2020 at 12:38 PM Abhijit Deodhar <abhideodhar@gmail.com> wrote:
Ok, I tried that step and it worked. But now I am hitting an issue at the next step: [image: image.png]
How to get past this error or debug it?
Thanks Abhijit
On Mon, Apr 6, 2020 at 12:30 PM Yoshida, Shigeru < Shigeru.Yoshida@windriver.com> wrote:
Hi Abhijit,
Please try following commands on controller-0:
source /etc/platform/openrc OAM_IF=enp2s1 system host-if-modify controller-1 $OAM_IF -c platform system interface-network-assign controller-1 $OAM_IF oam system interface-network-assign controller-1 mgmt0 cluster-host
controller-1 is not configured at that point and system command normally be activated on active controller.
Thanks, Shigeru
From: Abhijit Deodhar <abhideodhar@gmail.com> Sent: Monday, April 6, 2020 3:25 PM To: starlingx-discuss@lists.starlingx.io Subject: Re: [Starlingx-discuss] StarlingX install question
Forgot to mention that I tried doing this step to enter the admin mode, but the openrc script doesnt seem to exist on controller-1
So I am not sure how to proceed.
Please advise.
~Abhijit
On Mon, Apr 6, 2020 at 11:44 AM Abhijit Deodhar <mailto: abhideodhar@gmail.com> wrote: Hi,
I am trying to install StarlingX on virtual standard with controller storage configuration. I am following the steps mentioned in this document:
https://docs.starlingx.io/deploy_install_guides/r3_release/virtual/controlle...
I reached the step where 2 controllers and 2 workers are up and running. Now I am confused with "configure controller-1" step.
https://docs.starlingx.io/deploy_install_guides/r3_release/virtual/controlle...
I see an error while doing this step on controller-1:
I tried using sudo to repeat the step:
Can someone please help me with this step to proceed with the installation?
Regards Abhijit
Please help me On Mon, Apr 6, 2020 at 12:38 PM Abhijit Deodhar <abhideodhar@gmail.com> wrote:
Ok, I tried that step and it worked. But now I am hitting an issue at the next step: [image: image.png]
How to get past this error or debug it?
Thanks Abhijit
On Mon, Apr 6, 2020 at 12:30 PM Yoshida, Shigeru < Shigeru.Yoshida@windriver.com> wrote:
Hi Abhijit,
Please try following commands on controller-0:
source /etc/platform/openrc OAM_IF=enp2s1 system host-if-modify controller-1 $OAM_IF -c platform system interface-network-assign controller-1 $OAM_IF oam system interface-network-assign controller-1 mgmt0 cluster-host
controller-1 is not configured at that point and system command normally be activated on active controller.
Thanks, Shigeru
From: Abhijit Deodhar <abhideodhar@gmail.com> Sent: Monday, April 6, 2020 3:25 PM To: starlingx-discuss@lists.starlingx.io Subject: Re: [Starlingx-discuss] StarlingX install question
Forgot to mention that I tried doing this step to enter the admin mode, but the openrc script doesnt seem to exist on controller-1
So I am not sure how to proceed.
Please advise.
~Abhijit
On Mon, Apr 6, 2020 at 11:44 AM Abhijit Deodhar <mailto: abhideodhar@gmail.com> wrote: Hi,
I am trying to install StarlingX on virtual standard with controller storage configuration. I am following the steps mentioned in this document:
https://docs.starlingx.io/deploy_install_guides/r3_release/virtual/controlle...
I reached the step where 2 controllers and 2 workers are up and running. Now I am confused with "configure controller-1" step.
https://docs.starlingx.io/deploy_install_guides/r3_release/virtual/controlle...
I see an error while doing this step on controller-1:
I tried using sudo to repeat the step:
Can someone please help me with this step to proceed with the installation?
Regards Abhijit
Hi Abhijit, I’ll put this on the agenda for the community call today, will see if we can get someone to help out. Bill… From: Abhijit Deodhar <abhideodhar@gmail.com> Sent: Wednesday, April 8, 2020 12:57 AM To: starlingx-discuss@lists.starlingx.io Subject: Re: [Starlingx-discuss] StarlingX install question Please help me On Mon, Apr 6, 2020 at 12:38 PM Abhijit Deodhar <abhideodhar@gmail.com<mailto:abhideodhar@gmail.com>> wrote: Ok, I tried that step and it worked. But now I am hitting an issue at the next step: [image.png] How to get past this error or debug it? Thanks Abhijit On Mon, Apr 6, 2020 at 12:30 PM Yoshida, Shigeru <Shigeru.Yoshida@windriver.com<mailto:Shigeru.Yoshida@windriver.com>> wrote: Hi Abhijit, Please try following commands on controller-0: source /etc/platform/openrc OAM_IF=enp2s1 system host-if-modify controller-1 $OAM_IF -c platform system interface-network-assign controller-1 $OAM_IF oam system interface-network-assign controller-1 mgmt0 cluster-host controller-1 is not configured at that point and system command normally be activated on active controller. Thanks, Shigeru From: Abhijit Deodhar <abhideodhar@gmail.com<mailto:abhideodhar@gmail.com>> Sent: Monday, April 6, 2020 3:25 PM To: starlingx-discuss@lists.starlingx.io<mailto:starlingx-discuss@lists.starlingx.io> Subject: Re: [Starlingx-discuss] StarlingX install question Forgot to mention that I tried doing this step to enter the admin mode, but the openrc script doesnt seem to exist on controller-1 So I am not sure how to proceed. Please advise. ~Abhijit On Mon, Apr 6, 2020 at 11:44 AM Abhijit Deodhar <mailto:abhideodhar@gmail.com<mailto:abhideodhar@gmail.com>> wrote: Hi, I am trying to install StarlingX on virtual standard with controller storage configuration. I am following the steps mentioned in this document: https://docs.starlingx.io/deploy_install_guides/r3_release/virtual/controlle... I reached the step where 2 controllers and 2 workers are up and running. Now I am confused with "configure controller-1" step. https://docs.starlingx.io/deploy_install_guides/r3_release/virtual/controlle... I see an error while doing this step on controller-1: I tried using sudo to repeat the step: Can someone please help me with this step to proceed with the installation? Regards Abhijit
Abhijit, I have a few suggestions that might help: · If this is your first time installing StarlingX, I think it would be better to try an AIO Simplex installation first - as per https://docs.starlingx.io/deploy_install_guides/r3_release/virtual/aio_simpl.... · In any case, since you ran into earlier issues, I think it would make sense for you to re-start your installation from the beginning. If you hit issues in a fresh installation, send a new email to the mailing list. Please let us know the name of the load you are using as well. Bart From: Abhijit Deodhar [mailto:abhideodhar@gmail.com] Sent: April 8, 2020 12:57 AM To: starlingx-discuss@lists.starlingx.io Subject: Re: [Starlingx-discuss] StarlingX install question Please help me On Mon, Apr 6, 2020 at 12:38 PM Abhijit Deodhar <abhideodhar@gmail.com<mailto:abhideodhar@gmail.com>> wrote: Ok, I tried that step and it worked. But now I am hitting an issue at the next step: [image.png] How to get past this error or debug it? Thanks Abhijit On Mon, Apr 6, 2020 at 12:30 PM Yoshida, Shigeru <Shigeru.Yoshida@windriver.com<mailto:Shigeru.Yoshida@windriver.com>> wrote: Hi Abhijit, Please try following commands on controller-0: source /etc/platform/openrc OAM_IF=enp2s1 system host-if-modify controller-1 $OAM_IF -c platform system interface-network-assign controller-1 $OAM_IF oam system interface-network-assign controller-1 mgmt0 cluster-host controller-1 is not configured at that point and system command normally be activated on active controller. Thanks, Shigeru From: Abhijit Deodhar <abhideodhar@gmail.com<mailto:abhideodhar@gmail.com>> Sent: Monday, April 6, 2020 3:25 PM To: starlingx-discuss@lists.starlingx.io<mailto:starlingx-discuss@lists.starlingx.io> Subject: Re: [Starlingx-discuss] StarlingX install question Forgot to mention that I tried doing this step to enter the admin mode, but the openrc script doesnt seem to exist on controller-1 So I am not sure how to proceed. Please advise. ~Abhijit On Mon, Apr 6, 2020 at 11:44 AM Abhijit Deodhar <mailto:abhideodhar@gmail.com<mailto:abhideodhar@gmail.com>> wrote: Hi, I am trying to install StarlingX on virtual standard with controller storage configuration. I am following the steps mentioned in this document: https://docs.starlingx.io/deploy_install_guides/r3_release/virtual/controlle... I reached the step where 2 controllers and 2 workers are up and running. Now I am confused with "configure controller-1" step. https://docs.starlingx.io/deploy_install_guides/r3_release/virtual/controlle... I see an error while doing this step on controller-1: I tried using sudo to repeat the step: Can someone please help me with this step to proceed with the installation? Regards Abhijit
participants (4)
-
Abhijit Deodhar
-
Wensley, Barton
-
Yoshida, Shigeru
-
Zvonar, Bill