Hi Longqian, The pxe boot attempt showing in the compute's console says it didn't get a response for pxe. Configuring(net1 52:54:00:21:22:66)......................................Error 0x040ee119 (http://ipxe.org/040ee119) No more network devices So one would first make sure the network was correctly plugged. Could you describe what networks are plugged to which interfaces? Is the network interface that is plugged to managment network configured to try boot?  Which network is interface "net1 52:54:00:21:22:66" plugged to? Is it the case that you were able to install and configure controller-1? The mac address starting with 52 is in the range of locally administered mac addresses, which implies you are running virtual servers.  Are you using the libvirt deployment method found in stx-tools git repo and referenced on the wiki https://wiki.openstack.org/wiki/StarlingX/Installation_Guide If you are following that wiki and using stx-tools, may I inquire: what prompted you to use https://bugs.launchpad.net/starlingx/+bug/1790716 as a source of information for boot, and use to "system host-add" as opposed to "system host-update"? M On 2018-10-25 8:24 a.m., Zhao, Longqian wrote:

Hi,

I have a problem as follows:

My problems:

Compute-0 failed configuring

Problem Description: After I install and deploy controller-0...

1. Power on compute-0, The console prints the following information:

+++++++++++++++++++++++++++++++++++++++++++++++++++++++

Booting from Hard Disk...

Boot failed: not a bootable disk

Booting from DVD/CD...

Boot failed: Could not read from CDROM (code 0003)

Booting from ROM...

iPXE (PCI 02:02:0) starting execution...ok

iPXE initializing devices...ok

iPXE 1.0.0+git-20150424.a25a16d-1ubuntu1.2 - Open Source Network Boot Firmware --http://ipxe.org Features: Omitted here Configuring(net1 52:54:00:21:22:66)......................................Error 0x040ee119 (http://ipxe.org/040ee119) No more network devices

No bootable device. ++++++++++++++++++++++++++++++++++++++++++++++++++++++++

2. I configured my controller-0 according to the information provided by this url: https://bugs.launchpad.net/starlingx/+bug/1790716

a. $ source /etc/nova/openrc

b. ~(keystone_admin)$ system host-add -n compute-0 compute -m 52:54:00:21:22:66

c. ~(keystone_admin)$ system host-show compute-0 | grep install

The console prints the following information:

++++++++++++++++++++++++++++++++++++++++++++++++++++++

~(keystone_admin)$ system host-show compute-0 | grep install

| install_output | text |

| install_state | None |

| install_state_info | None|

+++++++++++++++++++++++++++++++++++++++++++++++++++++++

3. I use this ISO (http://starlingx-hub.zpn.intel.com/ISO/stx-2018-10-23-33-r-2018.10.iso) to install.

Please give me a tip or help, thank you very much...

Thanks again, Longqian.

_______________________________________________ Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss