[Starlingx-discuss] Unable to bring up controller-0

徐蕴 xuyun at jxresearch.com
Tue Dec 4 01:30:48 UTC 2018


Hello,

Thanks for Eric's hint. I doubted this problem is related to OVS bridge setup yesterday

controller-0:/var/log/puppet# ovs-vsctl show
a98562f6-3223-4eab-a663-68cb4d8e9ece
    Manager "ptcp:6639:127.0.0.1"
        is_connected: true
    Bridge "br-phy0"
        Controller "tcp:127.0.0.1:6633"
            is_connected: true
        fail_mode: secure
        Port "lldpd2a87771-fd"
            Interface "lldpd2a87771-fd"
                type: internal
        Port "phy-br-phy0"
            Interface "phy-br-phy0"
                type: patch
                options: {peer="int-br-phy0"}
        Port "eth0"
            Interface "eth0"
                type: dpdk
                options: {dpdk-devargs="0000:02:00.1", n_rxq="1"}
                error: "Error attaching device '0000:02:00.1' to DPDK"
        Port "br-phy0"
            Interface "br-phy0"
                type: internal
    Bridge br-int
        Controller "tcp:127.0.0.1:6633"
            is_connected: true
        fail_mode: secure
        Port "int-br-phy0"
            Interface "int-br-phy0"
                type: patch
                options: {peer="phy-br-phy0"}
        Port br-int
            Interface br-int
                type: internal
    ovs_version: “2.9.0"

I don’t know why ‘eth0’ was added into the br-phy0 bridge, since there is no ‘eth0’ in my machine. I configured an interface named ‘eno4’ for my data plane.
[wrsroot at controller-0 log(keystone_admin)]$ system host-if-list -a 1
+--------------------------------------+------+----------+----------+---------+-----------+----------+-------------+----------------------------+-------------------+
| uuid                                 | name | class    | type     | vlan id | ports     | uses i/f | used by i/f | attributes                 | provider networks |
+--------------------------------------+------+----------+----------+---------+-----------+----------+-------------+----------------------------+-------------------+
| 548477c1-038f-4280-a4b1-d7c11d724b09 | eno4 | data     | ethernet | None    | [u'eno4'] | []       | []          | MTU=1500,accelerated=False | providernet-a     |
| 5c4760f5-a32b-49b9-91d1-73a72fdcabfb | eno3 | None     | ethernet | None    | [u'eno3'] | []       | []          | MTU=1500                   | None              |
| 7b85e213-f435-4693-a13a-364de1e06a35 | eno1 | platform | ethernet | None    | [u'eno1'] | []       | []          | MTU=1500                   | None              |
| 96e1e865-2f7c-486e-8e9e-88fcb1c71686 | lo   | platform | virtual  | None    | []        | []       | []          | MTU=1500                   | None              |
| c87ccb52-a1c7-4332-87f9-5966e6599ee6 | eno2 | None     | ethernet | None    | [u'eno2'] | []       | []          | MTU=1500                   | None              |
+--------------------------------------+------+----------+----------+---------+-----------+----------+-------------+----------------------------+—————————+

And also the puppet log seems confirm that ovs setup failure because of ‘eth0':

controller-0:/var/log/puppet# grep -r /var/log/puppet/ -e Error -e Warning
/var/log/puppet/2018-12-03-08-05-45_compute/puppet.log:2018-12-03T08:07:16.348 Notice: 2018-12-03 16:07:16 +0800 /Stage[main]/Platform::Vswitch::Ovs/Platform::Vswitch::Ovs::Port[eth0]/Exec[ovs-add-port: eth0]/returns: ovs-vsctl: Error detected while setting up 'eth0': Error attaching device '0000:02:00.1' to DPDK.  See ovs-vswitchd log for details.
/var/log/puppet/2018-12-03-08-05-45_compute/puppet.log:2018-12-03T08:07:16.443 Error: 2018-12-03 16:07:16 +0800 ovs-ofctl add-flow br-phy0 dl_dst=01:80:c2:00:00:0e,dl_type=0x88cc,hard_timeout=0,idle_timeout=0,in_port=eth0,actions=output:lldpd2a87771-fd returned 1 instead of one of [0]
/var/log/puppet/2018-12-03-08-05-45_compute/puppet.log:2018-12-03T08:07:16.678 Error: 2018-12-03 16:07:16 +0800 /Stage[main]/Platform::Vswitch::Ovs/Platform::Vswitch::Ovs::Flow[eth0]/Exec[ovs-add-flow: eth0]/returns: change from notrun to 0 failed: ovs-ofctl add-flow br-phy0 dl_dst=01:80:c2:00:00:0e,dl_type=0x88cc,hard_timeout=0,idle_timeout=0,in_port=eth0,actions=output:lldpd2a87771-fd returned 1 instead of one of [0]
/var/log/puppet/2018-12-03-08-05-45_compute/puppet.log:2018-12-03T08:07:28.800 Warning: 2018-12-03 16:07:28 +0800 /Stage[post]/Platform::Ceph::Post/File[/var/run/.ceph_started]: Skipping because of failed dependencies
/var/log/puppet/2018-12-03-08-05-45_compute/puppet.log:2018-12-03T08:07:28.806 Warning: 2018-12-03 16:07:28 +0800 /Stage[post]/Platform::Config::Post/Service[crond]: Skipping because of failed dependencies
/var/log/puppet/2018-12-03-08-05-45_compute/puppet.log:2018-12-03T08:07:28.817 Warning: 2018-12-03 16:07:28 +0800 /Stage[post]/Platform::Config::Compute::Post/File[/etc/platform/.initial_compute_config_complete]: Skipping because of failed dependencies
/var/log/puppet/2018-12-03-08-05-45_compute/puppet.log:2018-12-03T08:07:28.824 Warning: 2018-12-03 16:07:28 +0800 /Stage[post]/Platform::Config::Compute::Post/File[/var/run/.compute_config_complete]: Skipping because of failed dependencies
/var/log/puppet/2018-12-03-08-05-45_compute/puppet.log:2018-12-03T08:07:28.833 Warning: 2018-12-03 16:07:28 +0800 /Stage[post]/Platform::Config::Post/File[/etc/platform/.initial_config_complete]: Skipping because of failed dependencies
/var/log/puppet/2018-12-03-08-05-45_compute/puppet.log:2018-12-03T08:07:28.839 Warning: 2018-12-03 16:07:28 +0800 /Stage[post]/Platform::Config::Post/File[/etc/platform/.config_applied]: Skipping because of failed dependencies


Any further suggestion how to fix this problem? Thank you.

Br,
Xu Yun

> 在 2018年12月3日,下午11:02,MacDonald, Eric <Eric.MacDonald at windriver.com> 写道:
> 
> 300.004 is a dependency alarm that should go away once controller-0 is unlocked-enabled.
>  
> Looks like an All-In-One system your trying to provision.
> Therefore this could be a controller or compute function configuration error.
>  
> I would look for the words Error and Warning in the puppet logs and see what that shows.
>  
> sudo grep จCr /var/log/puppet จCe Error จCe Warning
>  
> Eric.
>  
> From: ะ์ิฬ [mailto:xuyun at jxresearch.com <mailto:xuyun at jxresearch.com>] 
> Sent: Monday, December 03, 2018 4:26 AM
> To: starlingx-discuss at lists.starlingx.io <mailto:starlingx-discuss at lists.starlingx.io>
> Subject: [Starlingx-discuss] Unable to bring up controller-0
>  
> Hi,
>  
> Iกฏm trying to deploy a simplex on a bare metal server. After unlocking controller-0 following the installation_guide, two error events are reported and this node was degraded:
>  
> 200.011 <http://111.111.111.1/admin/fault_management/58857199-137d-41dc-a8ab-063024695f76/detail/>	
> controller-0 experienced a configuration failure. 
> host=controller-0 
> 300.004 <http://111.111.111.1/admin/fault_management/5be8292e-c1c1-4068-bce3-84b4d43d923b/detail/>	
> No enabled compute host with connectivity to provider network. 
> service=networking.providernet=e542cf30-a07d-41f7-be7b-cc5a4e14b0d7 
>  
> Would you please give me some hints how to debug this problem? Thank you!
>  
> Br,
> Xu Yun

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.starlingx.io/pipermail/starlingx-discuss/attachments/20181204/d7ab639a/attachment-0001.html>


More information about the Starlingx-discuss mailing list