[Starlingx-discuss] Help on shared vCPU usage

[Perez Carranza, Jose]

Thanks a lot... I will update my test  procedure !!

Regards,
José


> -----Original Message-----
> From: Rowsell, Brent [mailto:Brent.Rowsell at windriver.com]
> Sent: Tuesday, October 16, 2018 3:16 PM
> To: Perez Carranza, Jose <jose.perez.carranza at intel.com>; starlingx-
> discuss at lists.starlingx.io
> Subject: RE: [Starlingx-discuss] Help on shared vCPU usage
> 
> The output show you have no shared provisioned.
> For this scenario, one is required.
> 
> With the node locked.
> 
> system host-cpu-modify -f shared -p0 1 <node>
> 
> Brent
> 
> -----Original Message-----
> From: Perez Carranza, Jose [mailto:jose.perez.carranza at intel.com]
> Sent: Tuesday, October 16, 2018 4:10 PM
> To: Rowsell, Brent <Brent.Rowsell at windriver.com>; starlingx-
> discuss at lists.starlingx.io
> Subject: RE: [Starlingx-discuss] Help on shared vCPU usage
> 
> Here is the list [1]
> 
> So I need to use system host-cpu-modify and configure -p0 with the number of
> cores and assig the function as shared?
> 
> 1- http://paste.openstack.org/show/732294/
> 
> Regards,
> José
> 
> 
> > -----Original Message-----
> > From: Rowsell, Brent [mailto:Brent.Rowsell at windriver.com]
> > Sent: Tuesday, October 16, 2018 3:02 PM
> > To: Perez Carranza, Jose <jose.perez.carranza at intel.com>; starlingx-
> > discuss at lists.starlingx.io
> > Subject: RE: [Starlingx-discuss] Help on shared vCPU usage
> >
> > system host-cpu-list <node>
> >
> > -----Original Message-----
> > From: Perez Carranza, Jose [mailto:jose.perez.carranza at intel.com]
> > Sent: Tuesday, October 16, 2018 3:39 PM
> > To: Rowsell, Brent <Brent.Rowsell at windriver.com>; starlingx-
> > discuss at lists.starlingx.io
> > Subject: RE: [Starlingx-discuss] Help on shared vCPU usage
> >
> > I'm not sure about it, I just follow the procedure documented on
> > StarlingX [1] wiki, I don’t see there any label for shared vcpu, here
> > is what my controller and the system has configured [2], What I need to do
> that kind of provisioning?
> >
> > 1-
> > https://wiki.openstack.org/wiki/StarlingX/Installation_Guide_Virtual_E
> > nviron
> > ment/Duplex
> > 2- http://paste.openstack.org/show/732291/
> >
> > Regards,
> > José
> >
> >
> > > -----Original Message-----
> > > From: Rowsell, Brent [mailto:Brent.Rowsell at windriver.com]
> > > Sent: Tuesday, October 16, 2018 2:29 PM
> > > To: Perez Carranza, Jose <jose.perez.carranza at intel.com>; starlingx-
> > > discuss at lists.starlingx.io
> > > Subject: RE: [Starlingx-discuss] Help on shared vCPU usage
> > >
> > > Did you provision your host with a shared cpu ?
> > >
> > > Brent
> > >
> > >
> > >
> > > -----Original Message-----
> > > From: Perez Carranza, Jose [mailto:jose.perez.carranza at intel.com]
> > > Sent: Tuesday, October 16, 2018 3:27 PM
> > > To: starlingx-discuss at lists.starlingx.io
> > > Subject: [Starlingx-discuss] Help on shared vCPU usage
> > >
> > > Hi
> > >
> > > I'm trying to execute scenario 206 [1] that indicates that I need to
> > > launch instance with a flavor with "hw:wrs:shared_vcpu", I created a
> > > flavor with "hw:wrs:shared_vcpu=1" but at the moment of create the
> > > instance below error is displayed.. Is there any extra config or
> > > parameter that I need to apply before creating the instance ?
> > >
> > > Error (Duplex Bare-Metal):
> > > ======
> > > No valid host was found. There are not enough hosts available. controller-
> 0:
> > > (NUMATopologyFilter) Shared vCPU not enabled on host cell 1,
> > > required by instance cell 0, Shared vCPU not enabled on host cell 0,
> > > required by instance cell 0, controller-1: (NUM =====
> > >
> > > 1-
> > > https://wiki.openstack.org/wiki/StarlingX/stx.2018.10_Testplan_Instr
> > > uc
> > > tions
> > >
> > > Regards,
> > > José
> > >
> > > _______________________________________________
> > > Starlingx-discuss mailing list
> > > Starlingx-discuss at lists.starlingx.io
> > > http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss