[Starlingx-discuss] compute-0 failed configuring

[Michel Thebeau]

Hi Longqian,

The pxe boot attempt showing in the compute's console says it didn't get 
a response for pxe.

Configuring(net1 52:54:00:21:22:66)......................................Error 0x040ee119 (http://ipxe.org/040ee119)
               No more network devices

So one would first make sure the network was correctly plugged. Could 
you describe what networks are plugged to which interfaces? Is the 
network interface that is plugged to managment network configured to try 
boot?  Which network is interface "net1 52:54:00:21:22:66" plugged to?

Is it the case that you were able to install and configure controller-1?

The mac address starting with 52 is in the range of locally administered 
mac addresses, which implies you are running virtual servers.  Are you 
using the libvirt deployment method found in stx-tools git repo and 
referenced on the wiki 
https://wiki.openstack.org/wiki/StarlingX/Installation_Guide

If you are following that wiki and using stx-tools, may I inquire: what 
prompted you to use https://bugs.launchpad.net/starlingx/+bug/1790716 as 
a source of information for boot, and use to "system host-add" as 
opposed to "system host-update"?

M



On 2018-10-25 8:24 a.m., Zhao, Longqian wrote:
> Hi,
>
> I have a problem as follows:
>
> My problems:
>
>         Compute-0 failed configuring
>
> Problem Description:
> After I install and deploy controller-0...
>
>
> 1.      Power on compute-0,  The console prints the following information:
>
>
>
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++
>
> Booting  from Hard Disk...
>
> Boot failed: not a bootable disk
>
>
>
> Booting from DVD/CD...
>
> Boot failed: Could not read from CDROM (code 0003)
>
> Booting from ROM...
>
> iPXE (PCI 02:02:0) starting execution...ok
>
> iPXE initializing devices...ok
>
>
>
> iPXE 1.0.0+git-20150424.a25a16d-1ubuntu1.2 - Open Source Network Boot Firmware
>                 --http://ipxe.org
>                Features: Omitted here
>                Configuring(net1 52:54:00:21:22:66)......................................Error 0x040ee119 (http://ipxe.org/040ee119)
>                No more network devices
>
>                No bootable device.
>                ++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>
>
> 2.      I configured my controller-0 according to the information provided by this url: https://bugs.launchpad.net/starlingx/+bug/1790716
>
> a.      $ source /etc/nova/openrc
>
> b.      ~(keystone_admin)$ system host-add  -n  compute-0 compute -m 52:54:00:21:22:66
>
> c.      ~(keystone_admin)$ system host-show compute-0 | grep install
>
>
>
> The console prints the following information:
>
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++
>
> ~(keystone_admin)$ system host-show compute-0 | grep install
>
> | install_output | text |
>
> | install_state | None |
>
> | install_state_info | None|
>
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++
>
>
> 3.      I use this ISO (http://starlingx-hub.zpn.intel.com/ISO/stx-2018-10-23-33-r-2018.10.iso) to install.
>
> Please give me a tip or help, thank you very much...
>
> Thanks again,
> Longqian.
>
>
>
>
>
>
> _______________________________________________
> Starlingx-discuss mailing list
> Starlingx-discuss at lists.starlingx.io
> http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss