[Starlingx-discuss] Duplex Configuration: Unlock of controller-0 causes reboot

Marcel Schaible marcel at schaible-consulting.de
Wed Feb 13 16:47:40 UTC 2019


I am using the build centos-20190206T060000Z.

The main problem, beside of the noise is, that the system comes up and reboots immediately again.



> "Penney, Don" <Don.Penney at windriver.com> hat am 13. Februar 2019 um 17:41 geschrieben:
> 
> 
> Yes, this is the correct behavior.
> 
> As for the drbd warnings, there are some state change failures that occur as the system shuts down, but aren't a problem (aside from the noise). I've managed to clean up most of these in a recent update. What build are you using?
> 
> -----Original Message-----
> From: Marcel Schaible [mailto:marcel at schaible-consulting.de] 
> Sent: Wednesday, February 13, 2019 11:28 AM
> To: starlingx-discuss at lists.starlingx.io
> Subject: [Starlingx-discuss] Duplex Configuration: Unlock of controller-0 causes reboot
> 
> Hi,
> 
> when I unlock the controller-0 after installation following this tutorial
> 
> https://docs.starlingx.io/installation_guide/duplex.html#duplex
> 
> the system is rebooting automatically with a lot of errors from drdb.
> 
> Controller-1 is not configured at this point in time.
> 
> Must I configure the secondary controller before unlocking controller-0?
> 
> Thanks
> 
> Marcel
> 
> _______________________________________________
> Starlingx-discuss mailing list
> Starlingx-discuss at lists.starlingx.io
> http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss



More information about the Starlingx-discuss mailing list