[Starlingx-discuss] Duplex Configuration: Installation of controller-1 fails with dracut timeout

Marcel Schaible marcel at schaible-consulting.de
Fri Feb 15 17:16:37 UTC 2019


Hi Don,

your analysis was correct. Our interface ist not supported by the initrd.

Do you know by chance how to unpack and pack the initrd correctly?

Thanks

Marcel

> "Penney, Don" <Don.Penney at windriver.com> hat am 14. Februar 2019 um 20:48 geschrieben:
> 
> 
> Your load shouldn't have the http port change, which was merged the next day. So I would suggest checking that the lighttpd server is running fine on the active controller as the first step. If it is, then if you have some shell access from the failed installation, maybe you can confirm that the boot interface is supported by the initrd and rule out comms issues.
> 
> -----Original Message-----
> From: Marcel Schaible [mailto:marcel at schaible-consulting.de] 
> Sent: Thursday, February 14, 2019 2:41 PM
> To: Penney, Don
> Cc: starlingx-discuss at lists.starlingx.io
> Subject: Re: [Starlingx-discuss] Duplex Configuration: Installation of controller-1 fails with dracut timeout
> 
> Hi Don,
> 
> which build do you recommend?
> 
> Is there a workaround so I can keep my installation for now?
> 
> Thanks
> 
> Marcel 
> 
> Von meinem iPhone gesendet
> 
> > Am 14.02.2019 um 19:50 schrieb Penney, Don <Don.Penney at windriver.com>:
> > 
> > This means the initrd was unable to download the squashfs.img from the active controller. This could be a couple of things:
> > * problems with the lighttpd server on the active controller
> > * NICs that are unsupported by the initrd kernel modules
> > * some other comms issue
> > 
> > What load are you using? There was a recent update around http port config that moved lighttpd to listen to port 8080 instead of 80, but your boot cmdline is referencing http://pxecontroller/
> > 
> > 
> > -----Original Message-----
> > From: Marcel Schaible [mailto:marcel at schaible-consulting.de] 
> > Sent: Thursday, February 14, 2019 1:40 PM
> > To: starlingx-discuss at lists.starlingx.io
> > Subject: [Starlingx-discuss] Duplex Configuration: Installation of controller-1 fails with dracut timeout
> > 
> > Hi,
> > 
> > I am trying to install controller-1 in a duplex configuration (bare metal) and getting the following error:
> > 
> > Console log:
> > =============
> > 
> > [  201.379136] dracut-initqueue[730]: Warning: Could not boot.
> > [  OK  ] Started Show Plymouth Boot Screen.
> > [  OK  ] Started Device-Mapper Multipath Device Controller.
> >         Starting Open-iSCSI...
> > [  OK  ] Reached target Paths.
> > [  OK  ] Reached target Basic System.
> > [  OK  ] Started Open-iSCSI.
> >         Starting dracut initqueue hook...
> > [  140.683067] dracut-initqueue[730]: Warning: dracut-initqueue timeout - starting timeout scripts
> > [  141.198294] dracut-initqueue[730]: Warning: dracut-initqueue timeout - starting timeout scripts
> > ...
> > [  195.770491] dracut-initqueue[730]: Warning: dracut-initqueue timeout - starting timeout scripts
> > [  196.280235] dracut-initqueue[730]: Warning: dracut-initqueue timeout - starting timeout scripts
> > [Warning: /dev/root does not exist
> > 
> > Generating "/run/initramfs/rdsosreport.txt"
> > 
> > Entering emergency mode. Exit the shell to continue.
> > Type "journalctl" to view system logs.
> > You might want to save "/run/initramfs/rdsosreport.txt" to a USB stick or /boot
> > after mounting them and attach it to a bug report.
> > 
> > dracut:/# 
> > 
> > Kernel parameter: 
> > ==================
> > 
> > dracut:/# journalctl | grep -i boot
> > Jan 09 00:16:06 localhost kernel: Command line: BOOT_IMAGE=rel-19.01/installer-bzImage bootifonly=1 devfs=nomount inst.repo=http://pxecontroller/feed/rel-19.01/ inst.ks=http://pxecontroller/feed/rel-19.01/net_smallsystem_ks.cfg usbcore.autosuspend=-1 biosdevname=0 rd.net.timeout.dhcp=120 ksdevice=02:01:00:10:02:06 BOOTIF=02:01:00:10:02:06 boot_device=nvme0n1 rootfs_device=nvme0n1 inst.text console=ttyS0,115200 tisnotify=http://pxecontroller:6385/v1/ihosts/00273dcb-25fa-4204-98de-64fed0bfabfe/install_progress inst.gpt user_namespace.enable=1 security_profile=standard nopti nospectre_v2
> > =======
> > 
> > The message "[Warning: /dev/root does not exist" make me nervous. What does that mean?
> > 
> > Any idea is welcome!
> > 
> > Thanks
> > 
> > Marcel
> > 
> > _______________________________________________
> > Starlingx-discuss mailing list
> > Starlingx-discuss at lists.starlingx.io
> > http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss



More information about the Starlingx-discuss mailing list