[Starlingx-discuss] Duplex PXE Booting seems failed

Jaewook Oh kyle.oh95 at gmail.com
Fri Feb 22 10:09:45 UTC 2019


Hi Austin,

1.
- Here is the spec
Intel(R) Xeon(R) CPU D-1557 @ 1.50GHz
RAM : 32GB (Is this the problem? I already saw for the controller 64GB RAM
is needed, but I'm not sure, cause the installation was just stuck
literally,
SSD : 500GB
SuperMicro

- Bios Setting:
I enabled and disabled as the instruction said.
And at first try, I didn't used UEFI, after failure, I changed it into
UEFI, but the result was same.
I enabled VTx/Iommu  enable or not ?

2. I used bare metal one.. however when I pressed the buttons, nothing
happened. And the controller-1 is just stopped as I said before.

Thank you for helping me :)

Best Regards,
Jaewook.

2019년 2월 22일 (금) 오후 5:02, Sun, Austin <austin.sun at intel.com>님이 작성:

> Hi Jaewook:
>
>
>
>      1. Could you share the hw info for controller-1 ?   and check bios
> setting ?  is it using UEFI ?  VTx/Iommu  enable or not ?
>
>      2. Could you try access controller-1 and press Alt+F10 to see any log
> if the system is bare metal ?
>
>
>
>
>
> Thanks.
>
> BR
> Austin Sun.
>
>
>
>
>
> *From:* Jaewook Oh [mailto:kyle.oh95 at gmail.com]
> *Sent:* Friday, February 22, 2019 2:54 PM
> *To:* starlingx-discuss <starlingx-discuss at lists.starlingx.io>
> *Subject:* [Starlingx-discuss] Duplex PXE Booting seems failed
>
>
>
> Hello StarlingX Team,
>
>
>
> I finally solved the horizon error, the port number was different.
>
> I don't know why the port was changed, but anyway the port number was
> 8080, not 80.
>
>
>
> But I'm now facing new obstacles, Duplex PXE Booting.
>
>
>
> I succeed to connect PXE mode, but no more process..
>
>
>
> In Controller-0, I can find below result,
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.starlingx.io/pipermail/starlingx-discuss/attachments/20190222/37e5f95f/attachment.html>


More information about the Starlingx-discuss mailing list