[Starlingx-discuss] STX install_state status

[Scott Little]

I've updated the build scripts at CENGN.  We were still using the -0.2 
qualified names at one point in the scripts.

The next build should rebuild pxe-network-installer with the the correct 
kernel and ram disk.

Scott


On 2019-01-03 3:59 p.m., Penney, Don wrote:
>
> I’ve downloaded the CENGN ISO from:
>
> http://mirror.starlingx.cengn.ca/mirror/starlingx/master/centos/latest_build/outputs/iso/
>
> and it does not contain the installer patches. However, the installer 
> image here is patched:
>
> http://mirror.starlingx.cengn.ca/mirror/starlingx/master/centos/latest_build/outputs/installer/
>
> We’ll have to look at the build to see what’s going on here.
>
> *From:*Alonso, Juan Carlos [mailto:juan.carlos.alonso at intel.com]
> *Sent:* Thursday, January 03, 2019 3:18 PM
> *To:* Penney, Don; starlingx
> *Subject:* RE: STX install_state status
>
> Thank You for your help,
>
> I am using the latest ISO from CENGN and has the same issue.
>
> Do you know if there is a Launchpad already open for this issue?
>
> Regards.
>
> Juan Carlos Alonso
>
> *From:* Penney, Don [mailto:Don.Penney at windriver.com]
> *Sent:* Thursday, January 3, 2019 2:06 PM
> *To:* Alonso, Juan Carlos <juan.carlos.alonso at intel.com>; starlingx 
> <starlingx-discuss at lists.starlingx.io>
> *Subject:* RE: STX install_state status
>
> Please see my reply (attached) to the thread “the install progress 
> information has missing when install computer node , storage node, and 
> new controller node”. In particular, please check that your installer 
> has the required patch. If you’re using a stock CentOS installer 
> image, you will not get the install-state notifications.
>
> Cheers,
>
> Don.
>
> *From:*Alonso, Juan Carlos [mailto:juan.carlos.alonso at intel.com]
> *Sent:* Thursday, January 03, 2019 3:00 PM
> *To:* starlingx
> *Subject:* [Starlingx-discuss] STX install_state status
>
> Hi,
>
> Do someone have faced an issue with install states status when a new 
> host is added?
>
> During controller, compute or storage host installation:
>
> system host-show controller-1 | grep install
>
> | install_output      | text
>
> | install_state       | None
>
> | install_state_info  | None
>
> During installation several values should be showed as pre-install, 
> installing, completed. At the end of installation the output must be 
> install_state = completed.
>
> Regards.
>
> Juan Carlos Alonso
>
>
> _______________________________________________
> Starlingx-discuss mailing list
> Starlingx-discuss at lists.starlingx.io
> http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.starlingx.io/pipermail/starlingx-discuss/attachments/20190103/1cce49bd/attachment-0001.html>