[Starlingx-discuss] a question about starlingx error handling behavior

MacDonald, Eric Eric.MacDonald at windriver.com
Wed Jul 3 19:58:22 UTC 2019


OK, give me some time to fit this analysis into my existing task list. I'll be in touch before the end of the week.

From: Wang, Yi C [mailto:yi.c.wang at intel.com]
Sent: Wednesday, July 03, 2019 11:34 AM
To: MacDonald, Eric
Cc: 'starlingx-discuss at lists.starlingx.io'
Subject: RE: [Starlingx-discuss] a question about starlingx error handling behavior
Importance: High

Hi Eric,

I retested it. And here is all the information you requested. I uploaded them to my google drive. Below is the link.

https://drive.google.com/open?id=1LiCgPz5iS3SApb0Em8ZyA56lryAU-3Vm

I conducted two tests. For case 1, the system can recover. For case 2, it can't.
Case 1: pull the active controller management cable for longer than 30s, and then reinsert it
Case 2: pull the active controller management cable for less than 30s, and then reinsert it

For case 2, since controller-1 was shown as "offline" on controller-0. "collect all" can't get the information of controller-1. So I copied the whole folder "/var/log" of controller-1. It is included in the shared zip package. If you need more information, let me know. Thanks for your help again!

Thanks.
Yi
From: Wang, Yi C
Sent: Tuesday, July 2, 2019 9:21 PM
To: MacDonald, Eric <Eric.MacDonald at windriver.com>
Cc: starlingx-discuss at lists.starlingx.io
Subject: RE: [Starlingx-discuss] a question about starlingx error handling behavior

Hi Eric,

Thank you, Eric! I will collect all the information and get back to you soon.

I confirm that I physically pulled the cable.

Thanks.
Yi
From: MacDonald, Eric [mailto:Eric.MacDonald at windriver.com]
Sent: Tuesday, July 2, 2019 7:54 PM
To: Wang, Yi C <yi.c.wang at intel.com<mailto:yi.c.wang at intel.com>>
Cc: starlingx-discuss at lists.starlingx.io<mailto:starlingx-discuss at lists.starlingx.io>
Subject: Re: [Starlingx-discuss] a question about starlingx error handling behavior

Please perform both cases and for each

-         indicate what cables/interfaces were pulled

-         indicate what hosts the cables were pulled from

-         indicate approximate timestamp of when the cable was pulled

-         indicate approximate timestamp of when the cable was reinserted

-         Run 'collect all' and provide me access to the collect tarball

Also, just to be sure ... please confirm that you are physically pulling the cable and not just ifdowning the interface.

Eric.

From: Wang, Yi C [mailto:yi.c.wang at intel.com]
Sent: Sunday, June 30, 2019 9:45 PM
To: MacDonald, Eric
Cc: starlingx-discuss at lists.starlingx.io<mailto:starlingx-discuss at lists.starlingx.io>
Subject: [Starlingx-discuss] a question about starlingx error handling behavior
Importance: High

Hi Eric,

I am working on the LP 1815513<https://bugs.launchpad.net/starlingx/+bug/1815513>. Based on my tests, if I unplug the cable of active controller for management network for a long time (for example, 30s), and then plug it, the whole system can recover after some reboots. But if I unplug the cable for a short time, and then plug it. The whole system can't recover. I need to lock/unlock controllers manually to bring the system back. So my questions are:

1. Is the behavior acceptable? (recover the system by manual lock/unlock operations)
2. If the answer is no for #1, we need the system to recover automatically. I am not familiar with internal maintenance logics, could you give me some hints?

Thanks.
Yi
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.starlingx.io/pipermail/starlingx-discuss/attachments/20190703/9139acb9/attachment.html>


More information about the Starlingx-discuss mailing list