[Starlingx-discuss] Python2 -> Python3
Penney, Don
Don.Penney at windriver.com
Thu Jul 11 19:50:11 UTC 2019
It probably makes sense for me to look at moving the patching framework from "smart" back to "yum" - and at the same, restructure the code so that package management is a backend. It was originally written with yum many years ago, then moved to "smart" to align with yocto.
We can also look at upversioning requests-toolbelt - we're on an older version solely because there's never been a reason to update it. That said, the version we're using, 0.5.1, is in pypi as py2.py3, so presumably that's ok?
I can also look at the current use of the rpm module in patching and look for alternatives.
-----Original Message-----
From: Saul Wold [mailto:sgw at linux.intel.com]
Sent: Thursday, July 11, 2019 3:40 PM
To: starlingx-discuss at lists.starlingx.io
Subject: Re: [Starlingx-discuss] Python2 -> Python3
On 7/10/19 7:03 AM, Sun, Austin wrote:
> Hi All:
> The logical for here is if package from centos directly , we will wait upgrading to CentOS 8.x to compliance with python3
> Please filter 'Do not contain centos' in Column N , then it will show below 11 packages.
> As sync in non-OpenStack distro meeting.
> We still can filter out the 4 packages from fedora project and python-cephclient as flock servers .
> So below 6 packages are coming 3rd party which might be not python2to3 compliance.
>
> Package | who is using
> openvswitch | ovs
> python-cephfs | ceph
> python-smartpm | standalone package
> qemu-kvm-ev | mtce-compute
> requests-toolbelt | cgcs-patch-controller
> rpm-python | cgcs-patch-controller
Can you identify replacement python3 packages for any of these.
I know we found out that smartpm is used for the patch process, I know
that smartpm is also an older project that does not have any upstream
support any further, so that will require a fair amount of work.
Sau!
>
> Thanks.
> BR
> Austin Sun.
>
> -----Original Message-----
> From: Sun, Austin [mailto:austin.sun at intel.com]
> Sent: Wednesday, July 10, 2019 4:03 PM
> To: Xie, Cindy <cindy.xie at intel.com>; Hu, Yong <yong.hu at intel.com>; 'starlingx-discuss at lists.starlingx.io' <starlingx-discuss at lists.starlingx.io>
> Subject: Re: [Starlingx-discuss] Python2 -> Python3
>
> Hi All:
> New sheet was updated to [1]. Adding column N (repo_info) to record where the package coming from.
> There are 11 packages not from centos but including python and may not be compatiable python2 and python3.
> Package | who is using
> openvswitch | ovs
> python-aniso8601 | keystone
> python-cephclient | ceph
> python-cephfs | ceph
> python-django-bash-completion | sysinv
> python-smartpm | standalone package
> python-unittest2 | sysinv
> python-XStatic-jquery-ui | stx-gui
> qemu-kvm-ev | mtce-compute
> requests-toolbelt | cgcs-patch-controller
> rpm-python | cgcs-patch-controller
>
>
> I will continue check those 11 packages .
>
> [1] https://bugs.launchpad.net/starlingx/+bug/1808073
>
> Thanks.
> BR
> Austin Sun.
>
> -----Original Message-----
> From: Sun, Austin
> Sent: Thursday, July 4, 2019 11:43 AM
> To: Xie, Cindy <cindy.xie at intel.com>; Hu, Yong <yong.hu at intel.com>; starlingx-discuss at lists.starlingx.io
> Subject: RE: [Starlingx-discuss] Python2 -> Python3
>
> Hi Cindy:
> Yes. we will do it and update sheet.
>
> Thanks.
> BR
> Austin Sun.
>
> -----Original Message-----
> From: Xie, Cindy [mailto:cindy.xie at intel.com]
> Sent: Thursday, July 4, 2019 11:37 AM
> To: Hu, Yong <yong.hu at intel.com>; starlingx-discuss at lists.starlingx.io
> Subject: Re: [Starlingx-discuss] Python2 -> Python3
>
> Austin,
> Can you add one more column in your xls sheet: https://bugs.launchpad.net/starlingx/+bug/1808073/+attachment/5274592/+files/rpm_python_status-stx.2.0.xlsx:
>
> In your column "I", for your "3rd party" category, to break down "CentOS package" & "3rd party package", so that we can understand how much we can rely on CentOS 8.0, especially for those "risk" ones.
>
> Thanks. - cindy
>
> -----Original Message-----
> From: Yong Hu [mailto:yong.hu at intel.com]
> Sent: Thursday, July 4, 2019 11:25 AM
> To: starlingx-discuss at lists.starlingx.io
> Subject: Re: [Starlingx-discuss] Python2 -> Python3
>
> A general question, do we have experience and confidence to ensure 2 python versions (both interpreters and pip libs) can co-exist and each of packages can correctly refer to them??
>
> In my view the best solution is to wait for CentOS 8.0 :-)
>
>
> On 03/07/2019 2:55 PM, Dean Troyer wrote:
>> On 7/3/19 4:07 PM, Saul Wold wrote:
>>> The current proposal seems to be to completely convert the base
>>> CentOS7.6 system level python to use python3, this carries a high
>>> risk factor as changing out all system-level python code could have a
>>> cascade effect on system functionality and additional dependencies.
>>> While
>>
>> Changing the distro/system Python version out from under the rest of
>> the distro seems like an enormous time sink, much less a significant
>> reliability risk.
>>
>>> A better solution would be to build python3 and the associated
>>> requirements from the existing RHEL EPEL (Extra Packages for
>>> Enterprise Linux) Source RPMs repo and install them into the ISO.
>>> This version correctly installs in a segregated directory tree.
>>
>> We would probably want to run a significant subset of the upstream
>> OpenStack testing on this combination as it is not (AFAIK) tested there.
>> But this is true of any runtime + distro combination that is not in
>> the fairly short list of combinations that upstream OpenStack actively
>> tests.
>>
>>> Another option would be to delay the actual python2 conversion to
>>> StarlingX 4.0, the OpenStack Train release will still support python2.
>>
>> One downside to this is it leaves us no margin to defer the change
>> again, this is our second chance as it were. OpenStack U (as of now)
>> is likely to drop py2 support as a guarantee across-the-board.
>>
>>> There is still work that is needed beyond the conversion of the
>>> python code itself to things like RPM specfiles data and other source
>>> code (such as, C code that has #includes of python2.7). It's not
>>> clear to me how much functional testing with python3 has occurred for
>>> the flock beyond what Dean has started with devstack.
>>
>> I managed to get the fault services running on py3, sysinv fell over
>> during the dbsync in my quick post-PTG trial run. That is as far as I
>> took it. Anyone who wants to try can pick out the local.conf I posted
>> [0]
>>
>> dt
>>
>> [0] http://paste.openstack.org/show/753844/
>>
>
> _______________________________________________
> Starlingx-discuss mailing list
> Starlingx-discuss at lists.starlingx.io
> http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss
> _______________________________________________
> Starlingx-discuss mailing list
> Starlingx-discuss at lists.starlingx.io
> http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss
> _______________________________________________
> Starlingx-discuss mailing list
> Starlingx-discuss at lists.starlingx.io
> http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss
> _______________________________________________
> Starlingx-discuss mailing list
> Starlingx-discuss at lists.starlingx.io
> http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss
>
_______________________________________________
Starlingx-discuss mailing list
Starlingx-discuss at lists.starlingx.io
http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss
More information about the Starlingx-discuss
mailing list