[Starlingx-discuss] STX 1.0 automatically shutdown and power off.

Ezpeer Chen ezpeerchen at gmail.com
Thu Jun 20 09:20:21 UTC 2019


Dear Shuicheng,


In my environment, i need to test pci-sriov feature.

My installation Step:

1. Install STX 1.0 (2018/10) all-in-one simplex

2. Configure pci-sriov interface

3. Create network and VM on one vf port

4. Issue occurred




Best Regards


Lin, Shuicheng <shuicheng.lin at intel.com> 於 2019年6月20日 週四 下午4:41寫道:

> Hi Ezpeer,
>
> For the sm.log (/var/log/sm.log), it seems service process fail to run,
> and lead to sm think system is in unhealthy state, and try to reboot system
> to recover.
>
> It should be reboot, but not sure why it is shutdown in your environment
> and also auth.log shows “systemd-logind[893]: info Power key
> pressed./info Powering Off...”
>
>
>
> In the sm.log, I also see the network adapter is up/down randomly. It may
> be the cause of the service process failure.
>
> I also find VF Ethernet is enabled in the system also.
>
> To isolate the issue cause, could you help try to disable the VF Ethernet
> in BIOS, and use PF Ethernet only?
>
> Thanks.
>
>
>
>
>
> Best Regards
>
> Shuicheng
>
>
>
> *From:* Ezpeer Chen [mailto:ezpeerchen at gmail.com]
> *Sent:* Thursday, June 20, 2019 2:27 PM
> *To:* Lin, Shuicheng <shuicheng.lin at intel.com>
> *Cc:* starlingx-discuss at lists.starlingx.io
> *Subject:* Re: [Starlingx-discuss] STX 1.0 automatically shutdown and
> power off.
>
>
>
> Dear Shuicheng,
>
> Platform: STX 1.0 (
> http://mirror.starlingx.cengn.ca/mirror/starlingx/r2018.10/centos/latest_build/outputs/iso/
> )
>
>
>
> 1.  bare-metal system ,  MY host pc Controller-0 shutdown without reboot
>
> 2.  provisioned system  , all-in-one simplex
>
> 3.  collet cmd log file:
>
>      https://drive.google.com/open?id=1D7yw_IiCPrDBCn6GmPK1GDC7FAdo5Wcr
>
>
>
> Thanks for your help.
>
>
>
> Best Regards
>
>
>
> Lin, Shuicheng <shuicheng.lin at intel.com> 於 2019年6月20日 週四 下午1:56寫道:
>
> Hi Ezpeer,
>
> Is it virtual machine or bare-metal system?
>
> Is it a provisioned system? And what is the system configuration,
> simplex/duplex or multi node?
>
> StarlingX itself will not do auto-shutdown, but it may auto-reboot if
> there is critical error.
>
> Most of StarlingX’s log is at /var/log folder.
>
>
>
> You could run “collect” cmd in your fail system after the issue occur, and
> upload the generated logfile to somewhere others could access.
>
> Then I will have a check with it.
>
>
>
> Best Regards
>
> Shuicheng
>
>
>
> *From:* Ezpeer Chen [mailto:ezpeerchen at gmail.com]
> *Sent:* Thursday, June 20, 2019 11:41 AM
> *To:* starlingx-discuss at lists.starlingx.io
> *Subject:* [Starlingx-discuss] STX 1.0 automatically shutdown and power
> off.
>
>
>
> Dear all,
>
> My STX 1.0 will be automatically shutdown and power off.
>
> Where could i check the logs about this issue?
>
>
> Thanks a lot.
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.starlingx.io/pipermail/starlingx-discuss/attachments/20190620/c8dccbd9/attachment-0001.html>


More information about the Starlingx-discuss mailing list