[Starlingx-discuss] STX 1.0 automatically shutdown and power off.

[Lin, Shuicheng]

Hi Ezpeer,
I checked the log, it is the same reason as previous.
Have you tried to create VM without pci-sriov? Will the issue still occur?
If not, then we could narrow down to focus on the pci-sriov part.

Best Regards
Shuicheng

From: Ezpeer Chen [mailto:ezpeerchen at gmail.com]
Sent: Thursday, June 20, 2019 6:04 PM
To: Lin, Shuicheng <shuicheng.lin at intel.com>
Cc: starlingx-discuss at lists.starlingx.io
Subject: Re: [Starlingx-discuss] STX 1.0 automatically shutdown and power off.


Dear Shuicheng,


Update new information


I reinstall STX 1.0 (2018/10).



My installation Step:

1. Install STX 1.0 (2018/10) all-in-one simplex

2. Configure pci-sriov interface

   # source /etc/nova/openrc
   #neutron providernet-create providernet-a --type=flat
   #neutron providernet-create providernet-b --type=vlan
   #neutron providernet-range-create --name providernet-b-range1 --range 100-400 providernet-b
   #system host-if-modify -c pci-sriov controller-0 enp2s0f0 -p providernet-a -N 7
   #system host-if-modify -c data controller-0 enp2s0f1 -p providernet-b

   .....configure storage

   #system host-unlock controller-0

   System auto reboot

3. After reboot to prompt, about 10-20 minutes issue occurred.


Log files:
https://drive.google.com/open?id=1QViho0khiMQpYDOcF5ACZV2cwymgNEMS




Best Regards

Ezpeer Chen <ezpeerchen at gmail.com<mailto:ezpeerchen at gmail.com>> 於 2019年6月20日 週四 下午5:20寫道：
Dear Shuicheng,


In my environment, i need to test pci-sriov feature.

My installation Step:

1. Install STX 1.0 (2018/10) all-in-one simplex

2. Configure pci-sriov interface

3. Create network and VM on one vf port

4. Issue occurred




Best Regards


Lin, Shuicheng <shuicheng.lin at intel.com<mailto:shuicheng.lin at intel.com>> 於 2019年6月20日 週四 下午4:41寫道：
Hi Ezpeer,
For the sm.log (/var/log/sm.log), it seems service process fail to run, and lead to sm think system is in unhealthy state, and try to reboot system to recover.
It should be reboot, but not sure why it is shutdown in your environment and also auth.log shows “systemd-logind[893]: info Power key pressed./info Powering Off...”

In the sm.log, I also see the network adapter is up/down randomly. It may be the cause of the service process failure.
I also find VF Ethernet is enabled in the system also.
To isolate the issue cause, could you help try to disable the VF Ethernet in BIOS, and use PF Ethernet only?
Thanks.


Best Regards
Shuicheng

From: Ezpeer Chen [mailto:ezpeerchen at gmail.com<mailto:ezpeerchen at gmail.com>]
Sent: Thursday, June 20, 2019 2:27 PM
To: Lin, Shuicheng <shuicheng.lin at intel.com<mailto:shuicheng.lin at intel.com>>
Cc: starlingx-discuss at lists.starlingx.io<mailto:starlingx-discuss at lists.starlingx.io>
Subject: Re: [Starlingx-discuss] STX 1.0 automatically shutdown and power off.

Dear Shuicheng,

Platform: STX 1.0 ( http://mirror.starlingx.cengn.ca/mirror/starlingx/r2018.10/centos/latest_build/outputs/iso/)

1.  bare-metal system ,  MY host pc Controller-0 shutdown without reboot
2.  provisioned system  , all-in-one simplex
3.  collet cmd log file:
     https://drive.google.com/open?id=1D7yw_IiCPrDBCn6GmPK1GDC7FAdo5Wcr

Thanks for your help.

Best Regards

Lin, Shuicheng <shuicheng.lin at intel.com<mailto:shuicheng.lin at intel.com>> 於 2019年6月20日 週四 下午1:56寫道：
Hi Ezpeer,
Is it virtual machine or bare-metal system?
Is it a provisioned system? And what is the system configuration, simplex/duplex or multi node?
StarlingX itself will not do auto-shutdown, but it may auto-reboot if there is critical error.
Most of StarlingX’s log is at /var/log folder.

You could run “collect” cmd in your fail system after the issue occur, and upload the generated logfile to somewhere others could access.
Then I will have a check with it.

Best Regards
Shuicheng

From: Ezpeer Chen [mailto:ezpeerchen at gmail.com<mailto:ezpeerchen at gmail.com>]
Sent: Thursday, June 20, 2019 11:41 AM
To: starlingx-discuss at lists.starlingx.io<mailto:starlingx-discuss at lists.starlingx.io>
Subject: [Starlingx-discuss] STX 1.0 automatically shutdown and power off.

Dear all,

My STX 1.0 will be automatically shutdown and power off.

Where could i check the logs about this issue?


Thanks a lot.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.starlingx.io/pipermail/starlingx-discuss/attachments/20190622/90b6d84a/attachment-0001.html>