[Starlingx-discuss] How to turn off fault management?

[Rowsell, Brent]

I think the focus here should be why it is rebooting vs disabling functionality.
Do we know what the specific failure is ?

Brent

From: MacDonald, Eric [mailto:Eric.MacDonald at windriver.com]
Sent: Wednesday, June 26, 2019 7:54 AM
To: Ezpeer Chen <ezpeerchen at gmail.com>; Qian, Bin <Bin.Qian at windriver.com>
Cc: Lin, Shuicheng <shuicheng.lin at intel.com>; Liu, Tao <Tao.Liu at windriver.com>; starlingx-discuss at lists.starlingx.io
Subject: Re: [Starlingx-discuss] How to turn off fault management?

As mentioned below
“The only time maintenance will power off a host outside of explicit administrative action is if that host’s board management controller is provisioned, the critical action for a sensor group has been changed to power cycle AND a sensor in that sensor group reports a debounced critical severity.”
You would see customer logs to this effect.
Eric.

From: Ezpeer Chen [mailto:ezpeerchen at gmail.com]
Sent: Wednesday, June 26, 2019 3:56 AM
To: Qian, Bin
Cc: MacDonald, Eric; Lin, Shuicheng; Liu, Tao; starlingx-discuss at lists.starlingx.io<mailto:starlingx-discuss at lists.starlingx.io>
Subject: Re: [Starlingx-discuss] How to turn off fault management?

Dear all,

Will the fault management to do actions (reboot or shutdown) based on BMC's sensor status ?


Thanks

Qian, Bin <Bin.Qian at windriver.com<mailto:Bin.Qian at windriver.com>> 於 2019年6月25日 週二 上午2:23寫道：
SM only requires mtce to reboot a failed controller during a failover, i.e, in a duplex environment, the survivor controller requires mtce to reboot the failed controller.
SM won't require reboot when there is only 1 controller available (e.g an aio simplex).

Bin
________________________________
From: MacDonald, Eric [Eric.MacDonald at windriver.com<mailto:Eric.MacDonald at windriver.com>]
Sent: Monday, June 24, 2019 5:15 AM
To: Lin, Shuicheng; Liu, Tao; Ezpeer Chen; starlingx-discuss at lists.starlingx.io<mailto:starlingx-discuss at lists.starlingx.io>
Subject: Re: [Starlingx-discuss] How to turn off fault management?
Yes, SM can request mtce to reboot a controller and there will be an explicit mtce log for that (below)

controller-? is being force failed by SM

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.starlingx.io/pipermail/starlingx-discuss/attachments/20190626/f0ffcf4a/attachment.html>