[Starlingx-discuss] Fwd: [starlingx-discuss] [critical error after deployment] About "persistent critical 'Management Network'"

오재욱 kyle.oh95 at gmail.com
Wed Mar 27 12:42:51 UTC 2019


Thank you very much Eric,

I also saw those lines, and I agree with that point.
Unfortunately, I'm not sure what to do to stabilize my management network.

Is that mean check physical NIC? Or, is there any command that makes
network stable?

Thank you again,

BR,
Jaewook.

2019년 3월 27일 (수) 오후 9:38, MacDonald, Eric <Eric.MacDonald at windriver.com>님이
작성:

> There appears to be something wrong with your multi-cast setup as the
> hbsAgent is not able to setup its pulse messaging socket for the management
> interface.
>
>
>
> hbsAgent.log – This log seems to have rotated due to successive socket
> resetup retries.
>
> 2019-03-27T10:33:55.984 [4194.3824110] controller-0 hbsAgent ---
> msgClass.cpp      (1033) msgClassTx              : Info : Creating
> controller-0 socket on port 2106 with address: 239.1.1.2
>
> 2019-03-27T10:33:55.984 [4194.3824111] controller-0 hbsAgent ---
> msgClass.cpp      (1098) initSocket              :Error : Failed to bind
> socket to address (22:Invalid argument)
>
> 2019-03-27T10:33:55.984 [4194.3824112] controller-0 hbsAgent hbs
> hbsAgent.cpp      ( 575) _setup_pulse_messaging  :Error : Cannot open
> multicast transmit socket - rc:34 (22:Invalid argument)
>
>
>
> mtcAgent.log shows that your management interface is bouncing which is
> causing command failures.
>
> 2019-03-22T16:57:19.449 [94960.00107] controller-0 mtcAgent hbs
> nodeClass.cpp     (4288) service_netlink_events  : Warn : Management link
> eno2 is down
>
> 2019-03-22T16:57:19.449 [94960.00108] controller-0 mtcAgent hbs
> nodeClass.cpp     (4301) service_netlink_events  : Warn : eno2 is down
> (oper:down)
>
> 2019-03-22T16:57:19.881 [94960.00109] controller-0 mtcAgent hbs
> nodeClass.cpp     (4324) service_netlink_events  : Warn : Management link
> eno2 is up
>
> 2019-03-22T16:57:20.261 [94960.00110] controller-0 mtcAgent hbs
> nodeClass.cpp     (4288) service_netlink_events  : Warn : Management link
> eno2 is down
>
>
>
> *I suggest you stabilize your management network between the 2
> controllers.*
>
>
>
> You can always look for Error or Warn logs in mtcAgent.log as indication
> of unexpected conditions.
>
> The logs are kept quite short and try to indicate the issue at hand. In
> this case eno2 is bouncing.
>
>
>
> Eric.
>
>
>
> *From:* 오재욱 [mailto:kyle.oh95 at gmail.com]
> *Sent:* Tuesday, March 26, 2019 10:03 PM
> *To:* MacDonald, Eric
> *Cc:* Hu, Yong; Sun, Austin; starlingx-discuss
> *Subject:* Re: [Starlingx-discuss] Fwd: [starlingx-discuss] [critical
> error after deployment] About "persistent critical 'Management Network'"
> *Importance:* High
>
>
>
> Hello Eric,
>
> thanks for advice.
>
>
>
> I commented my answer to your advices,
>
>
>
> 0. Please check your network and maybe specifically its support for
> multicast messaging.
>
> -> Could you tell me how can I check that my network supports multicast
> messaging? Do I need function like 'omping'?
>
>
>
> 1. If you lock controller-1 can you ping it from the active controller.
>
> -> Yes, I can ping to controller-1 from the active one, with
> controller-1's management ip (192.168.204.4), and controller-1's oam ip
> (10.10.10.4).
>
>
>
> 2. If you need further assistance please provide the active controller’s
> mtcAgent.log and hbsAgent.log files
>
> -> I attached those files :)
>
>
>
> 3. You can always run ‘collect’ or ‘collect all’ on the active controller
> to get a  summary of the system state and use those logs for off system
> debug of your issue.
>
> -> Thanks, I totally didn't know about those commands!
>
>
>
> 2019년 3월 26일 (화) 오후 10:45, MacDonald, Eric <Eric.MacDonald at windriver.com>
> 님이 작성:
>
> That alarm is indication that Maintenance is failing Heartbeat over the
> Management network.
>
>
>
> Please check your network and maybe specifically its support for multicast
> messaging.
>
>
>
> If you lock controller-1 can you ping it from the active controller.
>
>
>
> If you need further assistance please provide the active controller’s
> mtcAgent.log and hbsAgent.log files
>
>
>
> You can always run ‘collect’ or ‘collect all’ on the active controller to
> get a  summary of the system state and use those logs for off system debug
> of your issue.
>
>
>
> Eric MacDonald.
>
>

-- 
================================================
*Jaewook Oh* (오재욱)
IISTRC - Internet Infra System Technology Research Center
369 Sangdo-ro, Dongjak-gu,
06978, Seoul, Republic of Korea
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.starlingx.io/pipermail/starlingx-discuss/attachments/20190327/0e8ea250/attachment-0001.html>


More information about the Starlingx-discuss mailing list