[Starlingx-discuss] DUPLEX: UI Problem: Failed to create network

Xu, Chenjie chenjie.xu at intel.com
Fri May 17 08:57:22 UTC 2019


Hi Marcel,
You are welcome! Based on your response, your neutron services and mariadb are not up. Thus this is not a UI problem. The root cause is that there is still some problems during setting up StarlingX. And this may be caused by ISO image. The ISO images (4.12 ~ now) are not green build.

It makes sense to wait for the next green build. 

Best Regards,
Xu, Chenjie

-----Original Message-----
From: Marcel Schaible [mailto:marcel at schaible-consulting.de] 
Sent: Friday, May 17, 2019 12:48 AM
To: Xu, Chenjie <chenjie.xu at intel.com>; Jones, Bruce E <bruce.e.jones at intel.com>; Perez Carranza, Jose <jose.perez.carranza at intel.com>; Zhao, Forrest <forrest.zhao at intel.com>; Guo, Ruijing <ruijing.guo at intel.com>
Cc: Perez, Ricardo O <ricardo.o.perez at intel.com>; starlingx-discuss at lists.starlingx.io; Khalil, Ghada <Ghada.Khalil at windriver.com>
Subject: RE: [Starlingx-discuss] DUPLEX: UI Problem: Failed to create network

Hi Xu,

thanks for your reply.

> Are you creating network "testnet" through UI? If sure, please take a screenshot. If not, please list the commands you used to create network "testnet".

The "testnet" was created via the UI. 

> Could you please list the outputs of following command:
>   kubectl get pod -n openstack | grep neutron

[root at controller-1 ~(keystone_admin)]# kubectl get pod -n openstack | grep neutron
neutron-dhcp-agent-controller-0-dec13249-ktj7f       0/1     Init:0/1    18         6d17h
neutron-dhcp-agent-controller-1-f2c6aeed-zhl7c       0/1     Init:0/1    3          6d17h
neutron-l3-agent-controller-0-a762cb46-9dvzv         0/1     Init:0/1    16         6d17h
neutron-l3-agent-controller-1-13ff4b3d-wdgvr         0/1     Init:0/1    2          6d17h
neutron-metadata-agent-controller-0-a762cb46-szk6j   0/1     Init:0/2    18         6d17h
neutron-metadata-agent-controller-1-347ae4cb-bxj59   0/1     Init:0/2    2          6d17h
neutron-ovs-agent-controller-0-a762cb46-p4q5x        0/1     Init:0/3    16         6d17h
neutron-ovs-agent-controller-1-347ae4cb-269wg        0/1     Init:0/3    3          6d17h
neutron-server-7b5f6f4c8f-4znth                      0/1     Init:0/1    0          6d5h
neutron-server-7b5f6f4c8f-vksqv                      0/1     Pending     0          6d17h
neutron-sriov-agent-controller-0-a762cb46-cntwk      0/1     Init:0/2    14         6d17h
neutron-sriov-agent-controller-1-13ff4b3d-j9swh      0/1     Init:0/2    2          6d17h
[root at controller-1 ~(keystone_admin)]#

> In addition to UI issues on your system, are there any other problems? I notice that your mariadb is not working in other email. 

We have some problems to get mariadb up and running and I think it is not running properly at the moment.

Just for my understanding: What information is actually stored in the db and is it mandatory for the UI?

Since we tried a lot of stuff to get starlingx flying, our system is currently in a semi-corrupted state.

With the image from April 11 we had some issues with ovdk and I think it make no sense to go back at the moment. 

I would rather wait for the next green build. 

Thanks for your help

Marcel

> "Xu, Chenjie" <chenjie.xu at intel.com> hat am 16. Mai 2019 um 11:23 geschrieben:
> 
> 
> Hi Marcel,
> The latest green build is April 11 ISO image as following. Please try this ISO image.
>   http://mirror.starlingx.cengn.ca/mirror/starlingx/master/centos/latest_green_build/outputs/iso/
>   
> http://mirror.starlingx.cengn.ca/mirror/starlingx/master/centos/latest
> _green_build/outputs/helm-charts/ And the corresponding guide should 
> be following version:
> https://wiki.openstack.org/w/index.php?title=StarlingX/Containers/Inst
> allation&oldid=169189
> 
> Are you creating network "testnet" through UI? If sure, please take a 
> screenshot. If not, please list the commands you used to create network "testnet".
> 
> Could you please list the outputs of following command:
>   kubectl get pod -n openstack | grep neutron
> 
> In addition to UI issues on your system, are there any other problems? I notice that your mariadb is not working in other email. 
> 
> Best Regards,
> Xu, Chenjie
> 
> -----Original Message-----
> From: Jones, Bruce E [mailto:bruce.e.jones at intel.com]
> Sent: Thursday, May 16, 2019 5:10 AM
> To: Marcel Schaible <marcel at schaible-consulting.de>; Perez Carranza, 
> Jose <jose.perez.carranza at intel.com>; Zhao, Forrest 
> <forrest.zhao at intel.com>; Guo, Ruijing <ruijing.guo at intel.com>
> Cc: Perez, Ricardo O <ricardo.o.perez at intel.com>; 
> starlingx-discuss at lists.starlingx.io; Khalil, Ghada 
> <Ghada.Khalil at windriver.com>
> Subject: Re: [Starlingx-discuss] DUPLEX: UI Problem: Failed to create 
> network
> 
> + folks from the StarlingX networking team - can you please help Marcel with the issue below please? 
> 
>         brucej
> 
> -----Original Message-----
> From: Marcel Schaible [mailto:marcel at schaible-consulting.de]
> Sent: Thursday, May 9, 2019 10:38 AM
> To: Perez Carranza, Jose <jose.perez.carranza at intel.com>
> Cc: Perez, Ricardo O <ricardo.o.perez at intel.com>; 
> starlingx-discuss at lists.starlingx.io
> Subject: Re: [Starlingx-discuss] DUPLEX: UI Problem: Failed to create 
> network
> 
> We follow the instructions from
> 
> https://wiki.openstack.org/wiki/StarlingX/Containers#Installing_and_Co
> nfiguring_StarlingX_with_Containers
> 
> 
> > Am 09.05.2019 um 19:30 schrieb Perez Carranza, Jose <jose.perez.carranza at intel.com>:
> > 
> > Hi Ricardo
> > 
> > Those instruction are outdated the new ones are here [1]
> > 
> > 1-
> > https://wiki.openstack.org/wiki/StarlingX/Containers#Installing_and_
> > Co
> > nfiguring_StarlingX_with_Containers
> > 
> > @Docs team shouldn't [2] be pointing to the new instruction for containers? 
> > 
> > 2- https://docs.starlingx.io/installation_guide
> > 
> > Regards,
> > José
> > 
> > 
> >> -----Original Message-----
> >> From: Perez, Ricardo O [mailto:ricardo.o.perez at intel.com]
> >> Sent: Thursday, May 9, 2019 12:23 PM
> >> To: Marcel Schaible <marcel at schaible-consulting.de>; starlingx- 
> >> discuss at lists.starlingx.io
> >> Subject: Re: [Starlingx-discuss] DUPLEX: UI Problem: Failed to 
> >> create network
> >> 
> >> Hi Marcel,
> >> 
> >> Are you following this instructions for your deployment:
> >> 
> >> https://wiki.openstack.org/wiki/StarlingX/Installation_Guide_Virtua
> >> l_
> >> Environm
> >> ent/Duplex
> >> 
> >> Regards
> >> -Richo
> >> 
> >> -----Original Message-----
> >> From: Marcel Schaible [mailto:marcel at schaible-consulting.de]
> >> Sent: Thursday, May 9, 2019 12:04 PM
> >> To: starlingx-discuss at lists.starlingx.io
> >> Subject: [Starlingx-discuss] DUPLEX: UI Problem: Failed to create 
> >> network
> >> 
> >> Hi,
> >> 
> >> I have the following problem with the UI at port 31000.
> >> 
> >> 1. Only the external Networks and subnets are visible in the UI.
> >> 
> >> 2. When we try to create a new network we get the error:
> >> 
> >> Error: Failed to create network "testnet". Unable to create the Network.
> >> No tenant Network is available for allocation. Neutron Server 
> >> Returns request ids …
> >> 
> >> We are using the image from 20190429/Duplex/bm.
> >> 
> >> What is the current state of the UI and can we update just the UI?
> >> 
> >> Thanks
> >> 
> >> Marcel
> >> 
> >> openstack network list
> >> +--------------------------------------+---------------+--------------------------------------+
> >> | ID                                   | Name          | Subnets                              |
> >> +--------------------------------------+---------------+--------------------------------------+
> >> | 1848fe83-bf0a-40d3-a78a-2a66d4765cbb | internal-net1 |
> >> | 9b468e0f-4171-4aa5-8c99-b08cd60748f7 |
> >> | 1ea8a6ad-f826-4550-8e2f-a576977fd7c2 | external-net1 |
> >> | 082089ee-ef7e-
> >> 4843-bceb-a536cdec3685 |
> >> | d296e412-1eec-4cac-bff6-18653ca2b5cc | public-net1   | 86096834-322d-
> >> 4b87-8a40-1f84932466a3 |
> >> +--------------------------------------+---------------+--------------------------------------+
> >> controller-1:~# !45
> >> openstack router show public-router0 No Router found for 
> >> public-router0 controller-1:~# openstack subnet list
> >> +--------------------------------------+------------------+--------------------------------------+-----
> >> -------------+
> >> | ID                                   | Name             | Network                              | Subnet
> >> |
> >> +--------------------------------------+------------------+--------------------------------------+-----
> >> -------------+
> >> | 082089ee-ef7e-4843-bceb-a536cdec3685 | external-subnet1 | 
> >> | 1ea8a6ad-
> >> f826-4550-8e2f-a576977fd7c2 | 192.168.51.0/24  |
> >> | 86096834-322d-4b87-8a40-1f84932466a3 | public-subnet1   | d296e412-
> >> 1eec-4cac-bff6-18653ca2b5cc | 192.168.101.0/24 |
> >> | 9b468e0f-4171-4aa5-8c99-b08cd60748f7 | internal-subnet1 |
> >> | 1848fe83-bf0a-
> >> 40d3-a78a-2a66d4765cbb | 10.1.1.0/24      |
> >> +--------------------------------------+------------------+--------------------------------------+-----
> >> -------------+
> >> controller-1:~# openstack router list
> >> +--------------------------------------+-----------------+--------+-------+---------------------------
> >> -------+-------------+-------+
> >> | ID                                   | Name            | Status | State | Project                          |
> >> Distributed | HA    |
> >> +--------------------------------------+-----------------+--------+-------+---------------------------
> >> -------+-------------+-------+
> >> | 1ca1acfe-299f-41ae-9a7e-157f867ed374 | public-router1  | ACTIVE | UP    |
> >> f52d0bd6b5164ad2a3f9f9de56f3d071 | False       | False |
> >> | eb1716cf-519f-4a58-bae8-c5d036579473 | private-router1 | ACTIVE | UP    |
> >> f52d0bd6b5164ad2a3f9f9de56f3d071 | False       | False |
> >> +--------------------------------------+-----------------+--------+-------+---------------------------
> >> -------+-------------+-------+
> >> controller-1:~#
> >> 
> >> _______________________________________________
> >> Starlingx-discuss mailing list
> >> Starlingx-discuss at lists.starlingx.io
> >> http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discus
> >> s _______________________________________________
> >> Starlingx-discuss mailing list
> >> Starlingx-discuss at lists.starlingx.io
> >> http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discus
> >> s
> 
> _______________________________________________
> Starlingx-discuss mailing list
> Starlingx-discuss at lists.starlingx.io
> http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss
> _______________________________________________
> Starlingx-discuss mailing list
> Starlingx-discuss at lists.starlingx.io
> http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss


More information about the Starlingx-discuss mailing list