[Starlingx-discuss] ansible deployment for duplex/standard
yan.chen at intel.com
Fri May 24 02:31:53 UTC 2019
I will try.
From: Poncea, Ovidiu [mailto:Ovidiu.Poncea at windriver.com]
Sent: Thursday, May 23, 2019 18:21
To: Chen, Yan <yan.chen at intel.com>; starlingx-discuss at lists.starlingx.io
Subject: RE: ansible deployment for duplex/standard
On controller-0 you need to delete the loopback interface and then configure the other nets on ctrl-0 with something like:
system host-if-modify controller-0 lo -c none
system host-if-modify controller-0 enp0s3 -c platform --networks oam
system host-if-modify controller-0 enp0s8 -c platform --networks mgmt
system host-if-modify controller-0 enp0s8 -c platform --networks cluster-host
system host-addr-list controller-0
The rest of the process is identical on the other nodes.
From: Chen, Yan [yan.chen at intel.com]
Sent: Wednesday, May 22, 2019 10:12 AM
To: starlingx-discuss at lists.starlingx.io<mailto:starlingx-discuss at lists.starlingx.io>
Subject: [Starlingx-discuss] ansible deployment for duplex/standard
I wonder if anyone can help me on the ansible deployment for duplex/standard.
I installed ISO (about 0519) on vms and run ansible with my yml file as below, but the 2nd controller failed to be installed via pxe.
After checked controller0, I found that mgmt network is configured to lo.
But use "config_controller --force" everything's ok.
Am I doing anything wrong with the yml file?
There's no instruction on WIKI for duplex + ansible yet. (?)
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Starlingx-discuss