[Starlingx-discuss] 回复: 回复:回复: openstack network creation failure: Flat provider networks are disabled
    钱江 
    qianjiang at baicells.com
       
    Fri Nov  1 04:31:32 UTC 2019
    
    
  
       Hi, Ezpeer
       Thanks very much, however I am very confused with some starlingx network concepts. From the system command, we see,
       systen network list
       system interface-network list
       system datanetwork list
       system interface-datanetwork list
       Could you tell me concepts of these network/datanetwork/interface-network? Or any available materials about the system networks?
------------------------------------------------------------------
发件人:Ezpeer Chen <ezpeerchen at gmail.com>
发送时间:2019年11月1日(星期五) 10:40
收件人:钱江 <qianjiang at baicells.com>
抄 送:"Sun, Austin" <austin.sun at intel.com>; starlingx-discuss <starlingx-discuss at lists.starlingx.io>
主 题:Re: [Starlingx-discuss] 回复:回复: openstack network creation failure: Flat provider networks are disabled
Dear  QianJiang,
Please reference the document https://wiki.openstack.org/wiki/StarlingX/Networking .
The document has an example about configuring the flat network.
Configure the flat network.
Thanks.
BR
钱江 <qianjiang at baicells.com> 於 2019年11月1日 週五 上午10:28寫道:
      Hi, Ezpeer
      I just followed "Install StarlingX Kubernetes on Virtual AIO-SX" (https://docs.starlingx.io/deploy_install_guides/r2_release/virtual/aio_simplex_install_kubernetes.html).
      Below pasted from the guide, 
      1). the read one, "physnet0" and "physnet1", should I replace it using real interfaces in host? 
      2). do you have any material about "system datanetwork"
      --------------------------
DATA0IF=eth1000
DATA1IF=eth1001
export COMPUTE=controller-0
PHYSNET0='physnet0'
PHYSNET1='physnet1'
SPL=/tmp/tmp-system-port-list
SPIL=/tmp/tmp-system-host-if-list
system host-port-list ${COMPUTE} --nowrap > ${SPL}
system host-if-list -a ${COMPUTE} --nowrap > ${SPIL}
DATA0PCIADDR=$(cat $SPL | grep $DATA0IF |awk '{print $8}')
DATA1PCIADDR=$(cat $SPL | grep $DATA1IF |awk '{print $8}')
DATA0PORTUUID=$(cat $SPL | grep ${DATA0PCIADDR} | awk '{print $2}')
DATA1PORTUUID=$(cat $SPL | grep ${DATA1PCIADDR} | awk '{print $2}')
DATA0PORTNAME=$(cat $SPL | grep ${DATA0PCIADDR} | awk '{print $4}')
DATA1PORTNAME=$(cat  $SPL | grep ${DATA1PCIADDR} | awk '{print $4}')
DATA0IFUUID=$(cat $SPIL | awk -v DATA0PORTNAME=$DATA0PORTNAME '($12 ~ DATA0PORTNAME) {print $2}')
DATA1IFUUID=$(cat $SPIL | awk -v DATA1PORTNAME=$DATA1PORTNAME '($12 ~ DATA1PORTNAME) {print $2}')
system datanetwork-add ${PHYSNET0} vlan
system datanetwork-add ${PHYSNET1} vlan
system host-if-modify -m 1500 -n data0 -c data ${COMPUTE} ${DATA0IFUUID}
system host-if-modify -m 1500 -n data1 -c data ${COMPUTE} ${DATA1IFUUID}
system interface-datanetwork-assign ${COMPUTE} ${DATA0IFUUID} ${PHYSNET0}
system interface-datanetwork-assign ${COMPUTE} ${DATA1IFUUID} ${PHYSNET1}
      --------------------------
------------------------------------------------------------------
发件人:Ezpeer Chen <ezpeerchen at gmail.com>
发送时间:2019年11月1日(星期五) 10:10
收件人:钱江 <qianjiang at baicells.com>
抄 送:"Sun, Austin" <austin.sun at intel.com>; starlingx-discuss <starlingx-discuss at lists.starlingx.io>
主 题:Re: [Starlingx-discuss] 回复:回复: openstack network creation failure: Flat provider networks are disabled
Dear  QianJiang,
Your command is incorrect.
Example:
[sysadmin at controller-0 ~(keystone_admin)]$ system interface-datanetwork-list  controller-0
+--------------+--------------------------------------+-----------+------------------+
| hostname     | uuid                                 | ifname    | datanetwork_name |
+--------------+--------------------------------------+-----------+------------------+
| controller-0 | 13e47f32-e9a4-4a33-9bc0-63c96e32bfb0 | enp98s0f1 | physnet-pci      |
| controller-0 | 6be1d6c2-01c2-45de-a319-4a6337375f7b | enp3s0    | phy-flat         |
| controller-0 | f4d817b4-97ca-40e2-a1df-7ef8d0640937 | enp98s0f0 | physnet-sriov    |
+--------------+--------------------------------------+-----------+------------------+
[sysadmin at controller-0 ~(keystone_admin)]$
钱江 <qianjiang at baicells.com> 於 2019年10月31日 週四 下午7:23寫道:
       Hi, Ezpeer
      I checked and yes, 
[sysadmin at controller-0 ~(keystone_admin)]$ system interface-network-list controller-0
+--------------+--------------------------------------+--------+--------------+
| hostname     | uuid                                 | ifname | network_name |
+--------------+--------------------------------------+--------+--------------+
| controller-0 | 2a17737a-bd4c-40fe-bbe7-163237109ed7 | enp2s1 | oam          |
| controller-0 | 33472810-e1b3-44fa-9a30-cda0d73bc296 | lo     | mgmt         |
| controller-0 | 3ae75daf-b22f-47d9-bc48-5086f700563d | lo     | cluster-host |
+--------------+--------------------------------------+--------+--------------+
      Best Regard
------------------------------------------------------------------
发件人:Ezpeer Chen <ezpeerchen at gmail.com>
发送时间:2019年10月31日(星期四) 18:12
收件人:钱江 <qianjiang at baicells.com>
抄 送:"Sun, Austin" <austin.sun at intel.com>; starlingx-discuss <starlingx-discuss at lists.starlingx.io>
主 题:Re: [Starlingx-discuss] 回复:回复: openstack network creation failure: Flat provider networks are disabled
Dear  ,
Do you do the interface-datanetwork-assign ?
#system interface-datanetwork-assign controller-0  <interface name>  <data-network name>
Reference Doc:
https://wiki.openstack.org/wiki/StarlingX/Networking
Thanks.
BR
钱江 <qianjiang at baicells.com> 於 2019年10月31日 週四 下午5:28寫道:
      Hi, Austin
       I checked, the type_drivers field has no problem. Do you have more ideas?
controller-0:~$ grep type_drivers -r /scratch/apps/stx-openstack/1.0-18-centos-stable-latest/charts/neutron/values.yaml 
        type_drivers: flat,vlan,vxlan
       Best Regard
------------------------------------------------------------------
发件人:Sun, Austin <austin.sun at intel.com>
发送时间:2019年10月31日(星期四) 16:42
收件人:钱江 <qianjiang at baicells.com>; starlingx-discuss <starlingx-discuss at lists.starlingx.io>
主 题:RE: 回复:[Starlingx-discuss] openstack network creation failure: Flat provider networks are disabled
Could you double check ? 
grep -r type_drivers /scratch/apps/stx-openstack/{app-version}-centos-stable-latest/charts/neutron/values.yaml ? 
it comes out like ‘type_drivers: flat,vlan,vxlan’, 
if not , you have to use helm command to override to include flat network. 
Thanks.
BR
 Austin Sun. 
From:  钱江 <qianjiang at baicells.com> 
Sent: Thursday, October 31, 2019 4:12 PM
To: Sun, Austin <austin.sun at intel.com>; starlingx-discuss <starlingx-discuss at lists.starlingx.io>
Subject: 回复:[Starlingx-discuss] openstack network creation failure: Flat provider networks are disabled
       Hi, Austin
       Thanks for your warmhearted.
       Follow your suggestion, but I still get the same issue.
[sysadmin at controller-0 ~(keystone_admin)]$ system datanetwork-add enp2s1 flat
 +--------------+--------------------------------------+
 | Property     | Value                                |
 +--------------+--------------------------------------+
 | id           | 3                                    |
 | uuid         | 7b999f8b-05fe-4c44-9742-907e4551d9b7 |
 | name         | enp2s1                               |
 | network_type | flat                                 |
 | mtu          | 1500                                 |
 | description  | None                                 |
 +--------------+--------------------------------------+
 [sysadmin at controller-0 ~(keystone_admin)]$ system datanetwork-list
 +--------------------------------------+----------+--------------+------+
 | uuid                                 | name     | network_type | mtu  |
 +--------------------------------------+----------+--------------+------+
 | 7b999f8b-05fe-4c44-9742-907e4551d9b7 | enp2s1   | flat         | 1500 |
 | 15eeb861-6910-4254-bb79-847bcbd88ed7 | physnet0 | vlan         | 1500 |
 | ad22c935-51a9-4823-9b55-f18df57e5982 | physnet1 | vlan         | 1500 |
 +--------------------------------------+----------+--------------+------+
controller-0:~$ openstack network create  --share --external   --provider-physical-network provider   --provider-network-type flat provider
Error while executing command: BadRequestException: 400, Invalid input for operation: Flat provider networks are disabled.
When I tried type vlan as following, it directed different issue.
controller-0:~$ openstack network create  --share --external   --provider-physical-network provider   --provider-network-type vlan provider
 Error while executing command: BadRequestException: 400, Invalid input for operation: physical_network 'provider' unknown for VLAN provider network.
------------------------------------------------------------------
发件人:Sun, Austin <austin.sun at intel.com>
发送时间:2019年10月31日(星期四) 15:23
收件人:钱江 <qianjiang at baicells.com>; starlingx-discuss <starlingx-discuss at lists.starlingx.io>
主 题:Re: [Starlingx-discuss] openstack network creation failure: Flat provider networks are disabled
Hi QianJiang:
The default datanetwork in guide is vlan, you should change it to flat before openstack network create. 
system datanetwork-add ${PHYSNET0} flat
Thanks.
BR
 Austin Sun. 
From:钱江 <qianjiang at baicells.com> 
Sent: Thursday, October 31, 2019 2:42 PM
To: starlingx-discuss <starlingx-discuss at lists.starlingx.io>
Subject: [Starlingx-discuss] openstack network creation failure: Flat provider networks are disabled
Hi, the community
After installation of "Virtual All-in-one Simplex Installation R2.0", everything goes well except,
controller-0:~$ openstack network create  --share --external   --provider-physical-network provider   --provider-network-type flat provider
 Error while executing command: BadRequestException: 400, Invalid input for operation: Flat provider networks are disabled.
Could anyone help to point out what's the issue, and how to fix it?
Best Regard
_______________________________________________
 Starlingx-discuss mailing list
Starlingx-discuss at lists.starlingx.io
http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss
  valid_lft forever preferred_lft forever
163: cali4b88ce
Install StarlingX Kubernetes on Virtual AIO-SX
Install StarlingX Kubernetes on Virtual AIO-SX
Install StarlingX Kubernetes on Virtual AIO-SX
Install StarlingX Kubernetes on Virtual AIO-SX
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.starlingx.io/pipermail/starlingx-discuss/attachments/20191101/75c563f7/attachment-0001.html>
    
    
More information about the Starlingx-discuss
mailing list