[Starlingx-discuss] Flat Network not working on STX R2.0
Ezpeer Chen
ezpeerchen at gmail.com
Wed Sep 18 06:19:15 UTC 2019
Dear Chenjie,
I can't find that property in flavor on STX R1.0.
controller-0:~$ source /etc/nova/openrc
[wrsroot at controller-0 ~(keystone_admin)]$ openstack flavor create --vcpus 1
--disk 5 --ram 512 m1.tiny
+----------------------------+------------------------------------------------------+
| Field | Value
|
+----------------------------+------------------------------------------------------+
| OS-FLV-DISABLED:disabled | False
|
| OS-FLV-EXT-DATA:ephemeral | 0
|
| disk | 5
|
| id | ad3157f1-441c-4d7c-a611-c2a75ba7fc1e
|
| name | m1.tiny
|
| os-flavor-access:is_public | True
|
| properties |
aggregate_instance_extra_specs:storage='local_image' |
| ram | 512
|
| rxtx_factor | 1.0
|
| swap |
|
| vcpus | 1
|
+----------------------------+------------------------------------------------------+
[wrsroot at controller-0 ~(keystone_admin)]$ openstack flavor show
ad3157f1-441c-4d7c-a611-c2a75ba7fc1e
+----------------------------+------------------------------------------------------+
| Field | Value
|
+----------------------------+------------------------------------------------------+
| OS-FLV-DISABLED:disabled | False
|
| OS-FLV-EXT-DATA:ephemeral | 0
|
| access_project_ids | None
|
| disk | 5
|
| id | ad3157f1-441c-4d7c-a611-c2a75ba7fc1e
|
| name | m1.tiny
|
| os-flavor-access:is_public | True
|
| properties |
aggregate_instance_extra_specs:storage='local_image' |
| ram | 512
|
| rxtx_factor | 1.0
|
| swap |
|
| vcpus | 1
|
+----------------------------+------------------------------------------------------+
[wrsroot at controller-0 ~(keystone_admin)]$
Thanks
Xu, Chenjie <chenjie.xu at intel.com> 於 2019年9月18日 週三 下午1:11寫道：
> Hi Ezpeer,
>
> You are welcome!
>
>
>
> Best Regards,
>
> Xu, Chenjie
>
>
>
> *From:* Ezpeer Chen [mailto:ezpeerchen at gmail.com]
> *Sent:* Wednesday, September 18, 2019 11:53 AM
> *To:* Xu, Chenjie <chenjie.xu at intel.com>
> *Cc:* starlingx-discuss at lists.starlingx.io
> *Subject:* Re: [Starlingx-discuss] Flat Network not working on STX R2.0
>
>
>
> Dear Chenjie,
>
>
>
> It is working now.
>
>
>
> Thanks for your help.
>
>
>
>
>
>
>
>
>
> Thanks
>
>
>
>
>
> Xu, Chenjie <chenjie.xu at intel.com> 於 2019年9月18日 週三 上午11:23寫道：
>
> Hi Ezpeer,
>
> If OVS-DPDK is used, you need to add below property to your flavor:
>
> openstack flavor set $i --property hw:mem_page_size=large
>
>
>
> The VM created with above flavor will use hugepage. OVS-DPDK also uses
> hugepage and OVS-DPDK communicates with VM through shared memory. That’s
> why VM needs to use hugepage. You can check the flavor in stx1.0, the above
> property is set by default.
>
>
>
> Best Regards,
>
> Xu, Chenjie
>
>
>
> *From:* Ezpeer Chen [mailto:ezpeerchen at gmail.com]
> *Sent:* Wednesday, September 18, 2019 11:05 AM
> *To:* Xu, Chenjie <chenjie.xu at intel.com>
> *Cc:* starlingx-discuss at lists.starlingx.io
> *Subject:* Re: [Starlingx-discuss] Flat Network not working on STX R2.0
>
>
>
> Dear Chenjie,
>
>
>
> OVS-DPDK environment ( vswitch_type = ovs-dpdk)
>
>
>
>
>
> data network(VM instance 192.168.100.3/24, nova:dhcp 192.168.100.2/24)
> <=====> L2 switch <====> PC/NB 192.168.100.x/24
>
>
>
> PC/NB ping 192.168.100.2 (nova:dhcp) =====> ok
>
> PC/NB ping 192.168.100.3 (VM instance) =====> Fail (VM instance
> can't get ip , manual configure static IP)
>
>
>
>
>
>
>
>
>
>
>
> Thanks
>
>
>
> Xu, Chenjie <chenjie.xu at intel.com> 於 2019年9月18日 週三 上午10:56寫道：
>
> Hi Ezpeer,
>
> Are you using OVS or OVS-DPDK? You mean you can ping external network
> through dhcp namespace like following?
>
> ip netns
>
> sudo ip netns exec $NAMESPACE bash
>
> ifconfig
>
> ping $external_ip
>
>
>
> If so, can you ping the DHCP ip from the VM with static IP configured.
>
>
>
> Best Regards,
>
> Xu, Chenjie
>
> *From:* Ezpeer Chen [mailto:ezpeerchen at gmail.com]
> *Sent:* Wednesday, September 18, 2019 10:34 AM
> *To:* Xu, Chenjie <chenjie.xu at intel.com>
> *Cc:* starlingx-discuss at lists.starlingx.io
> *Subject:* Re: [Starlingx-discuss] Flat Network not working on STX R2.0
>
>
>
> Dear all,
>
>
>
> add additional information:
>
> The nova:dhcp 's ip could ping to PC/NB.
>
>
>
>
>
> Thanks
>
>
>
>
>
> Ezpeer Chen <ezpeerchen at gmail.com> 於 2019年9月17日 週二 下午4:30寫道：
>
> Dear Chenjie,
>
>
>
> I follow this document:
>
> https://wiki.openstack.org/wiki/StarlingX/Networking
>
>
>
> Section:
>
> · Configure the flat network.
>
>
>
>
>
> My procedure on STX R1.0 is working, but not working on STX R2.0.
>
>
>
> data network(VM instance 192.168.100.X/24) <=====> L2 switch <====>
> PC/NB 192.168.100.x/24
>
>
>
>
>
> VM instance ping to PC/NB fail on STX R2.0.
>
>
>
>
>
> Thanks
>
>
>
>
>
>
>
>
>
>
>
>
>
> Xu, Chenjie <chenjie.xu at intel.com> 於 2019年9月17日 週二 下午4:23寫道：
>
> Hi Ezpeer,
>
> Could you please share all your steps for stx2.0 including creating
> datanetwork, binding interface to datanetwork and so on.
>
>
>
> The following commands will create an internal flat network for VMs:
>
> openstack network create --project ${ADMINID} --provider-network-type=flat
> --provider-physical-network=phy-flat netflat
>
>
>
> Typically you should not create VMs on external network. You should create
> an internal network and create VMs on internal network. The external
> network and internal network should be connected by router. Then you can
> ping external network in VM. The below commands can be referred:
>
> ADMINID=`openstack project list | grep admin | awk '{print $2}'`
>
> PHYSNET0='flat_external'
>
> PHYSNET1='flat_internal'
>
> PUBLICNET='public-net0'
>
> EXTERNALNET='external-net0'
>
> PUBLICSUBNET='public-subnet0'
>
> EXTERNALSUBNET='external-subnet0'
>
> PUBLICROUTER='public-router0'
>
>
>
> openstack network create --project ${ADMINID} --provider-network-type=flat
> --provider-physical-network=${PHYSNET0} --share --external ${EXTERNALNET}
>
> openstack network create --project ${ADMINID} --provider-network-type=flat
> --provider-physical-network=${PHYSNET1} ${PUBLICNET}
>
> PUBLICNETID=`openstack network list | grep ${PUBLICNET} | awk '{print $2}'`
>
> EXTERNALNETID=`openstack network list | grep ${EXTERNALNET} | awk '{print
> $2}'`
>
> openstack subnet create --project ${ADMINID} ${PUBLICSUBNET} --network
> ${PUBLICNET} --subnet-range 192.168.101.0/24
>
> openstack subnet create --project ${ADMINID} ${EXTERNALSUBNET} --gateway
> 192.168.100.1 --no-dhcp --network ${EXTERNALNET} --subnet-range
> 192.168.100.0/24 --ip-version 4
>
> openstack router create ${PUBLICROUTER}
>
> PUBLICROUTERID=`openstack router list | grep ${PUBLICROUTER} | awk '{print
> $2}'`
>
> openstack router set ${PUBLICROUTER} --external-gateway ${EXTERNALNETID}
> --disable-snat
>
> openstack router add subnet ${PUBLICROUTER} ${PUBLICSUBNET}
>
>
>
> Best Regards,
>
> Xu, Chenjie
>
>
>
> *From:* Ezpeer Chen [mailto:ezpeerchen at gmail.com]
> *Sent:* Tuesday, September 17, 2019 3:45 PM
> *To:* starlingx-discuss at lists.starlingx.io
> *Subject:* [Starlingx-discuss] Flat Network not working on STX R2.0
>
>
>
> Dear all,
>
>
>
> Please help check if this is my misunderstanding.
>
>
>
> Issue:
>
> Flat Network not working on STX R2.0 but it's working on STX R1.0. VM
> instance can't ping to public network with static IP configuration.
>
>
>
>
>
> Create Flat network on STX R1.0:
>
> =============================================================
>
> #ADMINID=`openstack project list | grep admin | awk '{print $2}'`
> #openstack network create --project ${ADMINID}
> --provider-network-type=flat --provider-physical-network=phy-flat netflat
> #openstack subnet create --project ${ADMINID} netflat-subnet --network
> netflat --subnet-range 192.168.100.0/24
> #openstack server create --image cirros --flavor m1.tiny --network netflat
> vm1
>
>
>
> =============================================================
>
>
>
> Interface setting on STXR2.0:
>
>
>
> [sysadmin at controller-0 ~(keystone_admin)]$ system host-if-list
> controller-0
>
> +--------------------------------------+-----------+-----------+----------+------+----------------+------+---------+---------------------------+
> | uuid | name | class | type
> | vlan | ports | uses | used by | attributes |
> | | | |
> | id | | i/f | i/f | |
>
> +--------------------------------------+-----------+-----------+----------+------+----------------+------+---------+---------------------------+
> | e0b545f0-dc0d-4c6c-9327-0008191cf3e6 | enp3s0 | data | ethernet
> | None | [u'enp3s0'] | [] | [] | MTU=1500,accelerated=True |
>
>
> [sysadmin at controller-0 ~(keystone_admin)]$ system datanetwork-list
> +--------------------------------------+----------+--------------+------+
> | uuid | name | network_type | mtu |
> +--------------------------------------+----------+--------------+------+
> | b42f45d1-a474-47cc-b603-8c3b4e50189b | phy-flat | flat | 1500 |
>
>
> [sysadmin at controller-0 ~(keystone_admin)]$ system
> interface-datanetwork-list controller-0
>
> +--------------+--------------------------------------+-----------+------------------+
> | hostname | uuid | ifname |
> datanetwork_name |
>
> +--------------+--------------------------------------+-----------+------------------+
> | controller-0 | 88dd6d9c-fd66-4034-98d5-c6a2155a5085 | enp3s0 |
> phy-flat |
>
> +--------------+--------------------------------------+-----------+------------------+
>
>
>
>
>
> Create Flat network on STX R2.0:
>
> =============================================================
>
> #export OS_CLOUD=openstack_helm
> #ADMINID=`openstack project list | grep admin | awk '{print $2}'`
> #openstack network create --project ${ADMINID}
> --provider-network-type=flat --provider-physical-network=phy-flat netflat
> #openstack subnet create --project ${ADMINID} netflat-subnet --network
> netflat --subnet-range 192.168.100.0/24
> #openstack server create --project ${ADMINID} --image cirros --flavor
> m1.tiny --network netflat vm1
>
>
>
> =============================================================
>
>
>
>
>
> The same procedure to create flat network on STX R1.0 and R2.0.
>
>
>
> But the vm instance can't get ip and can't ping to public network with
> static IP configuration on STX R2.0.
>
>
>
> Please help check this issue.
>
>
>
>
>
>
>
>
>
>
>
>
>
> Thanks
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.starlingx.io/pipermail/starlingx-discuss/attachments/20190918/7cae6d9c/attachment-0001.html>
More information about the Starlingx-discuss
mailing list