More information, I found that the neutron-ovs-agent-controller-0 was in
CrashLoopBackOff status.
> kubectl get pods --all-namespaces -o wide | grep -v Running | grep -v Completed
> NAMESPACE NAME READY STATUS RESTARTS AGE IP NODE NOMINATED NODE READINESS GATES
> openstack neutron-ovs-agent-controller-0-937646f6-hxpdb 0/1 CrashLoopBackOff 231 19h 192.168.204.3 controller-0 <none> <none>
> [sysadmin at controller-0 ~(keystone_admin)]$ kubectl logs neutron-ovs-agent-controller-0-937646f6-hxpdb -n openstack
> + exec neutron-openvswitch-agent --config-file /etc/neutron/neutron.conf --config-file /etc/neutron/plugins/ml2/ml2_conf.ini --config-file /tmp/pod-shared/ml2-local-ip.ini --config-file /etc/neutron/plugins/ml2/openvswitch_agent.ini
> 2019-09-19 14:33:28.328 9214 INFO neutron.common.config [-] Logging enabled!
> 2019-09-19 14:33:28.328 9214 INFO neutron.common.config [-] Logging enabled!
> 2019-09-19 14:33:28.328 9214 INFO neutron.common.config [-] /var/lib/openstack/bin/neutron-openvswitch-agent version 14.0.3.dev46
> 2019-09-19 14:33:28.328 9214 INFO neutron.common.config [-] /var/lib/openstack/bin/neutron-openvswitch-agent version 14.0.3.dev46
> 2019-09-19 14:33:28.946 9214 INFO neutron.agent.agent_extensions_manager [-] Loaded agent extensions: []
> 2019-09-19 14:33:28.946 9214 INFO neutron.agent.agent_extensions_manager [-] Loaded agent extensions: []
> 2019-09-19 14:33:29.875 9214 INFO neutron.plugins.ml2.drivers.openvswitch.agent.openflow.native.ovs_bridge [-] Bridge br-int has datapath-ID 0000862009f0be4d
> 2019-09-19 14:33:29.875 9214 INFO neutron.plugins.ml2.drivers.openvswitch.agent.openflow.native.ovs_bridge [-] Bridge br-int has datapath-ID 0000862009f0be4d
> 2019-09-19 14:33:36.881 9214 ERROR neutron.plugins.ml2.drivers.openvswitch.agent.ovs_neutron_agent [-] Parsing bridge_mappings failed: Value br-phy0 in mapping: 'physnet1:br-phy0' not unique. Agent terminated!
> 2019-09-19 14:33:36.881 9214 ERROR neutron.plugins.ml2.drivers.openvswitch.agent.ovs_neutron_agent [-] Parsing bridge_mappings failed: Value br-phy0 in mapping: 'physnet1:br-phy0' not unique. Agent terminated!
I setup the networking based on the test/automated-robot-suite for
baremetal provisioning.
Recommendations for further debugging this?
Thanks
Sau!
On 9/18/19 3:19 PM, Saul Wold wrote:
>
> Folks,
>
> I have been working on setting up a baremetal system on a NUC with dual
> NICs. I have been able to provision it and have the stx-openstack
> application manifest fully loaded.
>
> I have created a flavor, image and subnet to use for this instance, but
> when I try to launch it with:
>
> openstack server create --image cirros --flavor f1.small --nic
> net-id=3fd14704-8482-4cdd-975d-6e9e0a14e61e vm-cirros-1
>
> I get an Error and iget the following output from openstack server show.
>
>> controller-0:~$ openstack server show vm-cirros-1
>> +-------------------------------------+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
>>
>> | Field |
>> Value
>> |
>> +-------------------------------------+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
>>
>> | OS-DCF:diskConfig |
>> MANUAL
>> |
>> | OS-EXT-AZ:availability_zone
>> |
>> |
>> | OS-EXT-SRV-ATTR:host |
>> None
>> |
>> | OS-EXT-SRV-ATTR:hypervisor_hostname |
>> None
>> |
>> | OS-EXT-SRV-ATTR:instance_name |
>> instance-00000001
>> |
>> | OS-EXT-STS:power_state |
>> NOSTATE
>> |
>> | OS-EXT-STS:task_state |
>> None
>> |
>> | OS-EXT-STS:vm_state |
>> error
>> |
>> | OS-SRV-USG:launched_at |
>> None
>> |
>> | OS-SRV-USG:terminated_at |
>> None
>> |
>> | accessIPv4
>> |
>> |
>> | accessIPv6
>> |
>> |
>> | addresses
>> |
>> |
>> | config_drive
>> |
>> |
>> | created |
>> 2019-09-18T21:26:48Z
>> |
>> | fault | {u'message': u'Exceeded
>> maximum number of retries. Exhausted all hosts available for retrying
>> build failures for instance 9525360e-6ac6-4da1-a0dd-8f5d8c82ee75.',
>> u'code': 500, u'details': u' File
>> "/var/lib/openstack/lib/python2.7/site-packages/nova/conductor/manager.py",
>> line 627, in build_instances\n raise
>> exception.MaxRetriesExceeded(reason=msg)\n', u'created':
>> u'2019-09-18T21:27:00Z'} |
>> | flavor | f1.small
>> (15efd6ca-c402-4aba-819a-8ab323d9f482)
>> |
>> | hostId
>> |
>> |
>> | id |
>> 9525360e-6ac6-4da1-a0dd-8f5d8c82ee75
>> |
>> | image | cirros
>> (88a002f8-ba00-4aa3-9920-66f126fd2efc)
>> |
>> | key_name |
>> None
>> |
>> | name |
>> vm-cirros-1
>> |
>> | project_id |
>> 64f69c36cfd44c96802b40a3534d8906
>> |
>> | properties
>> |
>> |
>> | status |
>> ERROR
>> |
>> | updated |
>> 2019-09-18T21:27:00Z
>> |
>> | user_id |
>> 079d6c910606497c9e9329bb81f9afb4
>> |
>> | volumes_attached
>> |
>> |
>> +-------------------------------------+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
>>
>
> More logs needed? Where do I look?
>
> Thoughts?
>
> Sau!