[Starlingx-discuss] StarlingX install question

Abhijit Deodhar abhideodhar at gmail.com
Wed Apr 8 04:57:11 UTC 2020


Please help me

On Mon, Apr 6, 2020 at 12:38 PM Abhijit Deodhar <abhideodhar at gmail.com>
wrote:

> Ok, I tried that step and it worked. But now I am hitting an issue at the
> next step:
> [image: image.png]
>
> How to get past this error or debug it?
>
> Thanks
> Abhijit
>
> On Mon, Apr 6, 2020 at 12:30 PM Yoshida, Shigeru <
> Shigeru.Yoshida at windriver.com> wrote:
>
>> Hi Abhijit,
>>
>> Please try following commands on controller-0:
>>
>> source /etc/platform/openrc
>> OAM_IF=enp2s1
>> system host-if-modify controller-1 $OAM_IF -c platform
>> system interface-network-assign controller-1 $OAM_IF oam
>> system interface-network-assign controller-1 mgmt0 cluster-host
>>
>> controller-1 is not configured at that point and system command normally
>> be activated on active controller.
>>
>> Thanks,
>> Shigeru
>>
>>
>> From: Abhijit Deodhar <abhideodhar at gmail.com>
>> Sent: Monday, April 6, 2020 3:25 PM
>> To: starlingx-discuss at lists.starlingx.io
>> Subject: Re: [Starlingx-discuss] StarlingX install question
>>
>> Forgot to mention that I tried doing this step to enter the admin mode,
>> but the openrc script doesnt seem to exist on controller-1
>>
>>
>>
>>
>> So I am not sure how to proceed.
>>
>> Please advise.
>>
>> ~Abhijit
>>
>> On Mon, Apr 6, 2020 at 11:44 AM Abhijit Deodhar <mailto:
>> abhideodhar at gmail.com> wrote:
>> Hi,
>>
>> I am trying to install StarlingX on virtual standard with controller
>> storage configuration. I am following the steps mentioned in this document:
>>
>>
>> https://docs.starlingx.io/deploy_install_guides/r3_release/virtual/controller_storage_install_kubernetes.html
>>
>>
>> I reached the step where 2 controllers and 2 workers are up and running.
>> Now I am confused with "configure controller-1" step.
>>
>> https://docs.starlingx.io/deploy_install_guides/r3_release/virtual/controller_storage_install_kubernetes.html#configure-controller-1
>>
>>
>> I see an error while doing this step on controller-1:
>>
>>
>>
>> I tried using sudo to repeat the step:
>>
>>
>> Can someone please help me with this step to proceed with the
>> installation?
>>
>> Regards
>> Abhijit
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.starlingx.io/pipermail/starlingx-discuss/attachments/20200408/b6817fb1/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 24894 bytes
Desc: not available
URL: <http://lists.starlingx.io/pipermail/starlingx-discuss/attachments/20200408/b6817fb1/attachment-0001.png>


More information about the Starlingx-discuss mailing list