[Starlingx-discuss] Sanity TC code or output

Jascanu, Nicolae nicolae.jascanu at intel.com
Sat Aug 8 07:33:22 UTC 2020


Hi Pratik,
We installed the 3.0.0 image using the versioned helm-charts at: http://mirror.starlingx.cengn.ca/mirror/starlingx/release/3.0.0/centos/outputs/helm-charts/stx-openstack-1.0-19-centos-stable-versioned.tgz 

The sanity went well for simplex, duplex and standard external storage. 

Regards,
Nicolae Jascanu, Ph.D.
TSD Software Engineer



Internet Of Things Group
Galati, Romania

-----Original Message-----
From: Sun, Austin <austin.sun at intel.com> 
Sent: Friday, August 7, 2020 18:05
To: Pratik M. <pvmpublic at gmail.com>; Jascanu, Nicolae <nicolae.jascanu at intel.com>
Cc: starlingx-discuss at lists.starlingx.io
Subject: RE: [Starlingx-discuss] Sanity TC code or output

Hi Pratik:
    The R3.0 images should tag as rc-3.0-centos-stable-latest.  Would you like check your env via this command 

grep 'registry\.local' /opt/platform/armada/19.12/stx-openstack/1.0-19-centos-stable-latest/stx-openstack-stx-openstack.yaml

Thanks.
BR
Austin Sun. 

-----Original Message-----
From: Pratik M. <pvmpublic at gmail.com>
Sent: Friday, August 7, 2020 4:22 PM
To: Jascanu, Nicolae <nicolae.jascanu at intel.com>
Cc: starlingx-discuss at lists.starlingx.io
Subject: Re: [Starlingx-discuss] Sanity TC code or output

Thank you. I am using R3.0 19.12 (pl. see below). This seems to be a known issue.
http://lists.starlingx.io/pipermail/starlingx-discuss/2020-July/009270.html

I guess the charts are OK, but the upstream docker images changed? So even though the tests passed when R3.0 was released, the openstack install will fail for everyone trying to use R3.0, now.

[sysadmin at controller-0 ~(keystone_admin)]$ cat /etc/build.info ### ### StarlingX
###     Release 19.12
###

OS="centos"
SW_VERSION="19.12"
BUILD_TARGET="Host Installer"
BUILD_TYPE="Formal"
BUILD_ID="r/stx.3.0"

JOB="STX_BUILD_3.0"
BUILD_BY="starlingx.build at cengn.ca"
BUILD_NUMBER="21"
BUILD_HOST="starlingx_mirror"
BUILD_DATE="2019-12-13 02:30:00 +0000"

Thanks
Pratik

On Thu, Aug 6, 2020 at 5:25 PM Jascanu, Nicolae <nicolae.jascanu at intel.com> wrote:
>
> Hi Pratik,
> We are using for regular sanity the tests located at: 
> https://opendev.org/starlingx/test/src/branch/master/automated-robot-s
> uite/Tests
>
> Could you please tell what version you installed?
> The output of: cat /etc/build.info will be useful.
>
> Regards,
> Nicolae Jascanu, Ph.D.
> TSD Software Engineer
>
>
>
> Internet Of Things Group
> Galati, Romania
>
> -----Original Message-----
> From: Pratik M. <pvmpublic at gmail.com>
> Sent: Tuesday, August 4, 2020 13:12
> To: starlingx-discuss at lists.starlingx.io
> Subject: [Starlingx-discuss] Sanity TC code or output
>
> Hi,
> I am seeing stx-openstack apply failure w/ R3.0. I am following the 
> steps from documentation. Seems others are seeing this too
> https://bugs.launchpad.net/starlingx/+bug/1889023
>
> But the "Sanity OpenStack" TC must have passed, so I want to compare my steps with the ones there, to figure out if there is a difference.
> Can someone point me to either the code or the output of the test cases?
>
> Thanks
> Pratik
>
> _______________________________________________
> Starlingx-discuss mailing list
> Starlingx-discuss at lists.starlingx.io
> http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss

_______________________________________________
Starlingx-discuss mailing list
Starlingx-discuss at lists.starlingx.io
http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss


More information about the Starlingx-discuss mailing list