[Starlingx-discuss] Fwd: Error while using StarlingX

sanath kumar sanathukumar14 at gmail.com
Wed Dec 2 15:00:09 UTC 2020


---------- Forwarded message ---------
From: sanath kumar <sanathukumar14 at gmail.com>
Date: Wed, 2 Dec 2020 at 12:19
Subject: Re: [Starlingx-discuss] Error while using StarlingX
To: Jascanu, Nicolae <nicolae.jascanu at intel.com>


Hello Sir,
When I do *ls -al* in * test/automated-robot-suite* folder, I got this

(my-venv) general at gs-lab-51:~/test/automated-robot-suite$  ls -al
total 1520
drwxrwxr-x 14 general general    4096 Dec  2 11:51 .
drwxrwxr-x  7 general general    4096 Dec  1 22:40 ..
drwxrwxr-x  3 general general    4096 Dec  1 22:40 baremetal
lrwxrwxrwx  1 general general      31 Dec  2 11:51 bootimage.iso ->
stx-2018-10-19-29-r-2018.10.iso
drwxrwxr-x  3 general general    4096 Dec  2 11:51 Config
drwxrwxr-x  2 general general    4096 Dec  1 22:40 docs
lrwxrwxrwx  1 general general      69 Dec  2 11:51 latest-results ->
/home/general/test/automated-robot-suite/Results/20201202115139_Setup
drwxrwxr-x  3 general general    4096 Dec  2 11:51 Libraries
-rw-rw-r--  1 general general     137 Dec  1 22:40 LICENSE
-rw-rw-r--  1 general general   11358 Dec  1 22:40 LICENSE.apache
drwxrwxr-x  5 general general    4096 Dec  2 11:51 Qemu
-rw-rw-r--  1 general general   21506 Dec  1 22:40 README.rst
-rw-rw-r--  1 general general     209 Dec  1 22:40 requirements.txt
drwxrwxr-x  2 general general    4096 Dec  1 22:40 Resources
drwxrwxr-x  3 general general    4096 Dec  2 11:51 Results
-rwxrwxr-x  1 general general   13672 Dec  1 22:40 runner.py
drwxrwxr-x  2 general general    4096 Dec  2 11:51 %s
-rw-rw-r--  1 general general     159 Dec  1 22:40 setup.cfg
-rw-rw-r--  1 general general 1419574 Dec  2 11:41 stx-openstack.tgz
drwxrwxr-x  2 general general    4096 Dec  1 22:40 testcases
-rw-rw-r--  1 general general     109 Dec  1 22:40 test-requirements.txt
drwxrwxr-x  4 general general    4096 Dec  1 22:40 Tests
-rw-rw-r--  1 general general    1318 Dec  1 22:40 tox.ini
drwxrwxr-x  3 general general    4096 Dec  2 11:51 Utils
drwxrwxr-x  3 general general    4096 Dec  2 11:51 Variables


I have also attached all the log files from
*test/automated-robot-suite/latest-results*


Regards,
Sanath Kumar
+91 8971546076


On Thu, 26 Nov 2020 at 20:37, Jascanu, Nicolae <nicolae.jascanu at intel.com>
wrote:

> Hi Kumar,
>
> Could you please send the output of command *ls -al* in
> *test/automated-robot-suite* folder?
>
> Also, please send all the log files from
> *test/automated-robot-suite/latest-results*
>
> We will try to figure out what is missing.
>
>
>
> Regards,
>
> Nicolae Jascanu, Ph.D.
>
> Software Engineer
>
> IOTG
>
> Galati, Romania
>
>
>
>
>
> *From:* sanath kumar <sanathukumar14 at gmail.com>
> *Sent:* Wednesday, November 25, 2020 20:47
> *To:* Jascanu, Nicolae <nicolae.jascanu at intel.com>
> *Subject:* Re: [Starlingx-discuss] Error while using StarlingX
>
>
>
> Hello Sir,
>
> I have done all the above steps. And below is the error message I
> was getting, Please help me out.
>
>
>
> (my-venv) iot at gss-lab-51:~/test/automated-robot-suite$ python  runner.py
> --run-suite Setup --configuration 1 --environment virtual
> /home/iot/my-venv/lib/python3.5/site-packages/paramiko/transport.py:33:
> CryptographyDeprecationWarning: Python 3.5 support will be dropped in the
> next release of cryptography. Please upgrade your Python.
>   from cryptography.hazmat.backends import default_backend
> /home/iot/my-venv/lib/python3.5/site-packages/robot/variables/filesetter.py:77:
> YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as
> the default Loader is unsafe. Please read https://msg.pyyaml.org/load for
> full details.
>   variables = yaml.load(stream)
>
> ==============================================================================
> Setup :: Install and configure StarlingX ISO.
>
> ==============================================================================
> Qemu Libvirt VMs Setup Virtual :: Qemu-Libvirt VMs setup and confi... ...
> Qemu Libvirt VMs Setup Virtual :: Qemu-Libvirt VMs setup and confi... |
> FAIL |
> 1 != 0
>
> ------------------------------------------------------------------------------
> GRUB Checker For BIOS Virtual :: Check grub cmd boot line against ... |
> FAIL |
> sudo mount -o loop /home/iot/test/automated-robot-suite/bootimage.iso
> /tmp/cdrom: b'mount: /home/iot/test/automated-robot-suite/bootimage.iso:
> failed to setup loop device: No such file or directory'
>
> ------------------------------------------------------------------------------
> Install ISO Virtual :: Installation of controller node and define the |
> FAIL |
> EOF: End Of File (EOF). Exception style platform.
> <pexpect.pty_spawn.spawn object at 0x7f3833f37a58>
> command: /usr/bin/virsh
> args: ['/usr/bin/virsh', '-c', 'qemu:///system', 'console', 'controller-0']
> buffer (last 100 chars): b''
> before (last 100 chars): b" get domain 'controller-0'\r\nerror: Domain not
> found: no domain with matching name 'controller-0'\r\n\r\n"
> after: <class 'pexpect.exceptions.EOF'>
> match: None
> match_index: None
> exitstatus: 1
> flag_eof: True
> pid: 3589
> child_fd: 15
> closed: False
> timeout: 30
> delimiter: <class 'pexpect.exceptions.EOF'>
> logfile: <_io.BufferedWriter
> name='/home/iot/test/automated-robot-suite/Results/20201126001352_Setup/iso_setup_console.txt'>
> logfile_read: None
> logfile_send: None
> maxread: 2000
> ignorecase: False
> searchwindowsize: None
> delaybeforesend: 0.05
> delayafterclose: 0.1
> delayafterterminate: 0.1
> searcher: searcher_re:
>     0: re.compile(b'Escape character')
>
> ------------------------------------------------------------------------------
> Ansible Bootstrap Configuration :: Configure controller with local...
>
> Regards,
>
> Sanath Kumar
>
> +91 8971546076
>
>
>
>
>
> On Wed, 25 Nov 2020 at 11:12, sanath kumar <sanathukumar14 at gmail.com>
> wrote:
>
> Thank you, I will check.
>
> Regards,
>
> Sanath Kumar
>
> +91 8971546076
>
>
>
>
>
> On Tue, 24 Nov 2020 at 14:35, Jascanu, Nicolae <nicolae.jascanu at intel.com>
> wrote:
>
> Hi Kumar,
>
> We discussed the feedback you provided. Please check the following
> potential issues:
>
>    1. please check if *bootimage.iso* and *stx-openstack.tgz* (rename the
>    versioned helmchart ) are present in the *test/automated-robot-suite*
>    folder
>    2. add in /etc/sudoers the following: username ALL=(ALL) NOPASSWD: ALL
>    3. provide the proper rights to libvirt-sock: sudo chmod 666
>    /var/run/libvirt/libvirt-sock
>    4. uncomment *StrictHostKeyChecking no* in /etc/ssh/ssh_config
>
>
>
> Please let us know if you encounter other errors
>
>
>
>
>
> Regards,
>
> Nicolae Jascanu, Ph.D.
>
> Software Engineer
>
> IOTG
>
> Galati, Romania
>
>
>
>
>
> *From:* sanath kumar <sanathukumar14 at gmail.com>
> *Sent:* Monday, November 23, 2020 14:25
> *To:* Jascanu, Nicolae <nicolae.jascanu at intel.com>
> *Subject:* Re: [Starlingx-discuss] Error while using StarlingX
>
>
>
> Hello StarlingX Team,
>
> I am getting Below Error.
>
>
>
> (my-venv) starlingx at gss-lab-51:~/test/automated-robot-suite$ python3
>  runner.py --run-suite Setup --configuration 1 --environment virtual
> /home/starlingx/my-venv/lib/python3.5/site-packages/paramiko/transport.py:33:
> CryptographyDeprecationWarning: Python 3.5 support will be dropped in the
> next release of cryptography. Please upgrade your Python.
>   from cryptography.hazmat.backends import default_backend
> /home/starlingx/my-venv/lib/python3.5/site-packages/robot/variables/filesetter.py:77:
> YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as
> the default Loader is unsafe. Please read https://msg.pyyaml.org/load for
> full details.
>   variables = yaml.load(stream)
>
> ==============================================================================
> Setup :: Install and configure StarlingX ISO.
>
> ==============================================================================
> Qemu Libvirt VMs Setup Virtual :: Qemu-Libvirt VMs setup and confi... ...
> Qemu Libvirt VMs Setup Virtual :: Qemu-Libvirt VMs setup and confi... |
> FAIL |
> 1 != 0
>
> ------------------------------------------------------------------------------
> GRUB Checker For BIOS Virtual :: Check grub cmd boot line against ... |
> FAIL |
> sudo mount -o loop
> /home/starlingx/test/automated-robot-suite/bootimage.iso /tmp/cdrom:
> b'mount: /home/starlingx/test/automated-robot-suite/bootimage.iso: failed
> to setup loop device: No such file or directory'
>
> ------------------------------------------------------------------------------
> Install ISO Virtual :: Installation of controller node and define the |
> FAIL |
> EOF: End Of File (EOF). Exception style platform.
> <pexpect.pty_spawn.spawn object at 0x7f57fe769f60>
> command: /usr/bin/virsh
> args: ['/usr/bin/virsh', '-c', 'qemu:///system', 'console', 'controller-0']
> buffer (last 100 chars): b''
> before (last 100 chars): b" hypervisor\r\nerror: Failed to connect socket
> to '/var/run/libvirt/libvirt-sock': Permission denied\r\n"
> after: <class 'pexpect.exceptions.EOF'>
> match: None
> match_index: None
> exitstatus: 1
> flag_eof: True
> pid: 2884
> child_fd: 15
> closed: False
> timeout: 30
> delimiter: <class 'pexpect.exceptions.EOF'>
> logfile: <_io.BufferedWriter
> name='/home/starlingx/test/automated-robot-suite/Results/20201123174658_Setup/iso_setup_console.txt'>
> logfile_read: None
> logfile_send: None
> maxread: 2000
> ignorecase: False
> searchwindowsize: None
> delaybeforesend: 0.05
> delayafterclose: 0.1
> delayafterterminate: 0.1
> searcher: searcher_re:
>     0: re.compile(b'Escape character')
>
> ------------------------------------------------------------------------------
> Ansible Bootstrap Configuration :: Configure controller with local... |
> FAIL |
> Keyword 'Connect to Controller Node' failed after retrying for 5 minutes.
> The last error was: timeout: timed out
>
> ------------------------------------------------------------------------------
> Setup :: Install and configure StarlingX ISO.                         |
> FAIL |
> 4 critical tests, 0 passed, 4 failed
> 4 tests total, 0 passed, 4 failed
>
> ==============================================================================
> Debug:
> /home/starlingx/test/automated-robot-suite/Results/20201123174658_Setup/debug.log
> Output:
>  /home/starlingx/test/automated-robot-suite/Results/20201123174658_Setup/output.xml
> Log:
> /home/starlingx/test/automated-robot-suite/Results/20201123174658_Setup/log.html
> Report:
>  /home/starlingx/test/automated-robot-suite/Results/20201123174658_Setup/report.html
>
>
>
> Regards,
>
> Sanath Kumar
>
> +91 8971546076
>
>
>
>
>
> On Wed, 18 Nov 2020 at 20:57, Jascanu, Nicolae <nicolae.jascanu at intel.com>
> wrote:
>
> Hi Kumar,
>
> You can try to install StarlingX virtual or baremetal using the scripts
> that we are using for daily sanity validation. Please follow the
> configuration steps at:
> https://opendev.org/starlingx/test/src/branch/master/automated-robot-suite
> .
>
>
>
> Let us know if you have issues.
>
>
>
> Regards,
>
> Nicolae Jascanu, Ph.D.
>
> Software Engineer
>
> IOTG
>
> Galati, Romania
>
>
>
>
>
> *From:* sanath kumar <sanathukumar14 at gmail.com>
> *Sent:* Thursday, November 12, 2020 08:52
> *To:* Starlingx-discuss at lists.starlingx.io
> *Subject:* [Starlingx-discuss] Error while using StarlingX
>
>
>
> Hello StarlingX Team,
>
> While I execute below Commands I am getting some error.
>
> These are the Errors I am getting.
>
>
>
>
> Regards,
>
> Sanath Kumar
>
> +91 8971546076
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.starlingx.io/pipermail/starlingx-discuss/attachments/20201202/431bcee3/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: log_files.zip
Type: application/zip
Size: 158165 bytes
Desc: not available
URL: <http://lists.starlingx.io/pipermail/starlingx-discuss/attachments/20201202/431bcee3/attachment-0001.zip>


More information about the Starlingx-discuss mailing list