[Starlingx-discuss] Sanity Master Test LAYERED build ISO 20200520

[Jascanu, Nicolae]

The setup for running this image is the same as for previous images. I've executed the previous image 20200516 and it worked, then I retried the image 20200520 and it failed again on baremetal. 
We will further investigate

Regards,
Nicolae Jascanu, Ph.D.
TSD Software Engineer



Internet Of Things Group
Galati, Romania

-----Original Message-----
From: Penney, Don <Don.Penney at windriver.com> 
Sent: Wednesday, May 20, 2020 22:05
To: Saul Wold <sgw at linux.intel.com>; starlingx-discuss at lists.starlingx.io
Subject: Re: [Starlingx-discuss] Sanity Master Test LAYERED build ISO 20200520

I've got the ISO booting fine in Virtual Box.

Can you also describe how you're doing the installation? On a network install, "/dev/root does not exist" usually means dracut was unable to download the squashfs.img file at the expected location under the inst.repo URL specified. That could mean that the boot server is not setup properly, or it could also mean the installer kernel doesn't have the support for the NIC. So you could also check logs on the boot server to see if the request for squashfs.img was received, and whether there was a failure trying to serve it.


-----Original Message-----
From: Saul Wold [mailto:sgw at linux.intel.com]
Sent: Wednesday, May 20, 2020 2:57 PM
To: starlingx-discuss at lists.starlingx.io
Subject: Re: [Starlingx-discuss] Sanity Master Test LAYERED build ISO 20200520

Can you confirm if this was just bare metal or also virtual?

Thanks
   Sau!


On 5/20/20 11:31 AM, Jascanu, Nicolae wrote:
> Sanity Test from 2020-May-20
> (http://mirror.starlingx.cengn.ca/mirror/starlingx/master/centos/flock
> /20200520T015927Z/outputs/iso/
> )
> 
> Status: RED
> 
> ALL baremetal configurations failed at setup time due to partitioning 
> issues. Please find below the last lines from the console log:
> 
> [  200.397941] dracut-initqueue[3884]: Warning: dracut-initqueue 
> timeout
> - starting timeout scripts
> 
> [  200.906800] dracut-initqueue[3884]: Warning: dracut-initqueue 
> timeout
> - starting timeout scripts
> 
> [  201.4Warning: /dev/root does not exist
> 
> Generating "/run/initramfs/rdsosreport.txt"
> 
> Entering emergency mode. Exit the shell to continue.
> 
> Type "journalctl" to view system logs.
> 
> You might want to save "/run/initramfs/rdsosreport.txt" to a USB stick 
> or /boot
> 
> after mounting them and attach it to a bug report.
> 
> Regards,
> 
> STX Validation Team
> 
> 
> _______________________________________________
> Starlingx-discuss mailing list
> Starlingx-discuss at lists.starlingx.io
> http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss
> 

_______________________________________________
Starlingx-discuss mailing list
Starlingx-discuss at lists.starlingx.io
http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss
_______________________________________________
Starlingx-discuss mailing list
Starlingx-discuss at lists.starlingx.io
http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss