[Starlingx-discuss] Error while installing simplex virtual AIO-SX

Penney, Don Don.Penney at windriver.com
Thu Apr 15 13:22:35 UTC 2021


Your error is referring to the management interface, but you've included your oam interface config for reference.


From: Babu R <babu.r at hotmail.com>
Sent: Thursday, April 15, 2021 3:40 AM
To: starlingx-discuss at lists.starlingx.io
Subject: [Starlingx-discuss] Error while installing simplex virtual AIO-SX

[Please note: This e-mail is from an EXTERNAL e-mail address]
I'm getting error while trying to install the virtual AIO-SX. I have installed the ansible playbook

ansible-playbook /usr/share/ansible/stx-ansible/playbooks/bootstrap.yml

Ran these commands
source /etc/platform/openrc

OAM_IF=enp2s1
system host-if-modify controller-0 $OAM_IF -c platform
system interface-network-assign controller-0 $OAM_IF oam
system ntp-modify ntpservers=0.pool.ntp.org,1.pool.ntp.org

[root at localhost ~(keystone_admin)]# system host-unlock controller-0
Cannot unlock host controller-0 when management interface is configured on a virtual interface


$OAM_IF oamost ~(keystone_admin)]# system interface-network-assign controller-0
+--------------+--------------------------------------+
| Property     | Value                                |
+--------------+--------------------------------------+
| hostname     | controller-0                         |
| uuid         | da172ef6-6e46-4ca2-a81f-93d482e79814 |
| ifname       | enp2s1                               |
| network_name | oam                                  |
+--------------+--------------------------------------+


enp2s1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 10.10.10.3  netmask 255.255.255.0  broadcast 0.0.0.0
        inet6 fe80::5054:ff:fe1f:51fb  prefixlen 64  scopeid 0x20<link>
        ether 52:54:00:1f:51:fb  txqueuelen 1000  (Ethernet)
        RX packets 1328682  bytes 1981399747 (1.8 GiB)
        RX errors 444  dropped 0  overruns 0  frame 444
        TX packets 399465  bytes 28981363 (27.6 MiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

enp2s2: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet6 fe80::5054:ff:fe30:f2cb  prefixlen 64  scopeid 0x20<link>
        ether 52:54:00:30:f2:cb  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 517  bytes 161254 (157.4 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

eth1000: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet6 fe80::5054:ff:fe0d:8c00  prefixlen 64  scopeid 0x20<link>
        ether 52:54:00:0d:8c:00  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 544  bytes 158549 (154.8 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

eth1001: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet6 fe80::5054:ff:fe91:cf78  prefixlen 64  scopeid 0x20<link>
        ether 52:54:00:91:cf:78  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 507  bytes 158767 (155.0 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

Any inputs on how to resolve this?

Thanks,
Babu

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.starlingx.io/pipermail/starlingx-discuss/attachments/20210415/0bdec9db/attachment.html>


More information about the Starlingx-discuss mailing list