[Starlingx-discuss] Error while installing simplex virtual AIO-SX

[Penney, Don]

Please double-check your localhost.yml that you haven't set "system_mode: duplex". I don't think you should see this error message on simplex.

Please do "system show"

From: Babu R <babu.r at hotmail.com>
Sent: Thursday, April 15, 2021 10:37 AM
To: Penney, Don <Don.Penney at windriver.com>; starlingx-discuss at lists.starlingx.io
Subject: RE: Error while installing simplex virtual AIO-SX

[Please note: This e-mail is from an EXTERNAL e-mail address]

ler-0dmin at controller-0 ~(keystone_admin)]$ system interface-network-list control
+--------------+--------------------------------------+--------+--------------+
| hostname     | uuid                                 | ifname | network_name |
+--------------+--------------------------------------+--------+--------------+
| controller-0 | 2ea52872-593a-438e-a560-b314e0726fb4 | enp2s1 | oam          |
| controller-0 | 82313dc8-7ce5-4d7f-ae92-b123580b0295 | lo     | cluster-host |
| controller-0 | e190565d-12c6-4f11-9277-2aef932c6b2c | lo     | mgmt         |
+--------------+--------------------------------------+--------+--------------+



+--------------+--------------------------------------+
| Property     | Value                                |
+--------------+--------------------------------------+
| hostname     | controller-0                         |
| uuid         | e190565d-12c6-4f11-9277-2aef932c6b2c |
| ifname       | lo                                   |
| network_name | mgmt                                 |
+--------------+--------------------------------------+
[sysadmin at controller-0 ~(keystone_admin)]$

Please find the mgmt. Interface config. As described in the document it is attached to loopback interface only

From: Penney, Don<mailto:Don.Penney at windriver.com>
Sent: 15 April 2021 18:52
To: Babu R<mailto:babu.r at hotmail.com>; starlingx-discuss at lists.starlingx.io<mailto:starlingx-discuss at lists.starlingx.io>
Subject: RE: Error while installing simplex virtual AIO-SX

Your error is referring to the management interface, but you've included your oam interface config for reference.


From: Babu R <babu.r at hotmail.com<mailto:babu.r at hotmail.com>>
Sent: Thursday, April 15, 2021 3:40 AM
To: starlingx-discuss at lists.starlingx.io<mailto:starlingx-discuss at lists.starlingx.io>
Subject: [Starlingx-discuss] Error while installing simplex virtual AIO-SX

[Please note: This e-mail is from an EXTERNAL e-mail address]
I'm getting error while trying to install the virtual AIO-SX. I have installed the ansible playbook

ansible-playbook /usr/share/ansible/stx-ansible/playbooks/bootstrap.yml

Ran these commands
source /etc/platform/openrc

OAM_IF=enp2s1
system host-if-modify controller-0 $OAM_IF -c platform
system interface-network-assign controller-0 $OAM_IF oam
system ntp-modify ntpservers=0.pool.ntp.org,1.pool.ntp.org

[root at localhost ~(keystone_admin)]# system host-unlock controller-0
Cannot unlock host controller-0 when management interface is configured on a virtual interface


$OAM_IF oamost ~(keystone_admin)]# system interface-network-assign controller-0
+--------------+--------------------------------------+
| Property     | Value                                |
+--------------+--------------------------------------+
| hostname     | controller-0                         |
| uuid         | da172ef6-6e46-4ca2-a81f-93d482e79814 |
| ifname       | enp2s1                               |
| network_name | oam                                  |
+--------------+--------------------------------------+


enp2s1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 10.10.10.3  netmask 255.255.255.0  broadcast 0.0.0.0
        inet6 fe80::5054:ff:fe1f:51fb  prefixlen 64  scopeid 0x20<link>
        ether 52:54:00:1f:51:fb  txqueuelen 1000  (Ethernet)
        RX packets 1328682  bytes 1981399747 (1.8 GiB)
        RX errors 444  dropped 0  overruns 0  frame 444
        TX packets 399465  bytes 28981363 (27.6 MiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

enp2s2: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet6 fe80::5054:ff:fe30:f2cb  prefixlen 64  scopeid 0x20<link>
        ether 52:54:00:30:f2:cb  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 517  bytes 161254 (157.4 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

eth1000: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet6 fe80::5054:ff:fe0d:8c00  prefixlen 64  scopeid 0x20<link>
        ether 52:54:00:0d:8c:00  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 544  bytes 158549 (154.8 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

eth1001: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet6 fe80::5054:ff:fe91:cf78  prefixlen 64  scopeid 0x20<link>
        ether 52:54:00:91:cf:78  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 507  bytes 158767 (155.0 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

Any inputs on how to resolve this?

Thanks,
Babu


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.starlingx.io/pipermail/starlingx-discuss/attachments/20210415/3932c4d3/attachment-0001.html>