[Starlingx-discuss] Intel N3000 FPGA & support for igb_uio module

Venkata Ramana Veldanda Venkata.Veldanda at radisys.com
Fri Jan 22 17:36:20 UTC 2021


Thanks Mary,

Hi, All - Regarding 2] igb_uio

I found the igb_uio kernel module at the below location which doesn't seem to be loaded by default.
controller-0:/lib/modules# find . -name *.ko |grep igb
./4.18.0-147.3.1.rt24.96.el8_1.tis.8.x86_64/extra/igb_uio/igb_uio.ko

Is there any other reason why it isn't loaded by default?. Is this the target module to be loaded to work with igb_uio ?

Regards,
Venkata Veldanda

From: Camp, MaryX <maryx.camp at intel.com>
Sent: Friday, January 22, 2021 9:06 PM
To: Venkata Ramana Veldanda <Venkata.Veldanda at radisys.com>; starlingx-discuss at lists.starlingx.io
Subject: RE: Intel N3000 FPGA & support for igb_uio module

The e-mail below is from an external source. Please do not open attachments or click links from an unknown or suspicious origin.
Hi Venkata,
Regarding 1]
The StarlingX docs team is upstreaming content at the moment. There is more N3000 FPGA info in the Node Management guide: https://docs.starlingx.io/node_management/index.html
Please see these specific sections:
https://docs.starlingx.io/node_management/starlingx-kubernetes/hardware_acceleration_devices/n3000-overview.html
https://docs.starlingx.io/node_management/starlingx-kubernetes/hardware_acceleration_devices/updating-an-intel-n3000-fpga-image.html

I hope this is helpful.
thanks,
Mary Camp
Kelly Services Technical Writer | maryx.camp at intel.com<mailto:maryx.camp at intel.com>

From: Venkata Ramana Veldanda <Venkata.Veldanda at radisys.com<mailto:Venkata.Veldanda at radisys.com>>
Sent: Friday, January 22, 2021 4:11 AM
To: starlingx-discuss at lists.starlingx.io<mailto:starlingx-discuss at lists.starlingx.io>
Subject: [Starlingx-discuss] Intel N3000 FPGA & support for igb_uio module

Hi Team,

1]
I am using StarlingX 4.0 and trying to use the below guide to setup N3000 Vista Creek FPGA card.
https://docs.starlingx.io/configuration/intel_n3000_fpga.html

~(keystone_admin)$ system device-image-upload imagefile root-key pci_vendor
pci_device --key-signature key_signature --name imagename --description
description --image-version version

As part of my N3000 package I see some set of installer images, NVM package updates, iavf driver packages etc. However I am looking for the specific parameters that are highlighted above but I don't find. Anyone has an idea what does the file name look like for the root-key or the key_signature?

On my baremetal (CentOS vanilla) installation I was following the standard procedure defined "https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/ug/ug-ias-n3000.pdf" but there I didn't have to use any such key etc. Any help would be appreciated.

2]
Secondly, in StarlingX 4.0 I don't find igb_uio module present on the host. Is it currently supported as part of stx 4.0?
controller-0:~$ lsmod |grep igb_uio
controller-0:~$

Per documentation I see the below
The supported VF driver(s) are currently:
- igb_uio
- vfio



Venkata Veldanda

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.starlingx.io/pipermail/starlingx-discuss/attachments/20210122/5021e940/attachment-0001.html>


More information about the Starlingx-discuss mailing list