[Starlingx-discuss] Installation Problem: Configuration failed (Timeout at service endpoints reconfiguration)

Williams, Alexander Alexander.Williams at commscope.com
Wed Jun 16 01:24:28 UTC 2021


Hi Bailey,

Thanks for the help - I've been able to increase the timeout time, but after setting it to timeout after ~5 hours it has not made any progress.
Is there anything in particular in the puppet logs that I should be looking for?

Thanks again!

Best,
Alex

From: Bailey, Henry Albert (Al) <Al.Bailey at windriver.com>
Sent: Tuesday, June 15, 2021 1:33 PM
To: Williams, Alexander <Alexander.Williams at commscope.com>; starlingx-discuss at lists.starlingx.io
Subject: RE: Installation Problem: Configuration failed (Timeout at service endpoints reconfiguration)

I don't know if it helps, but that timeout had to be increased to 720 because it took a long time on certain hardware. See: https://github.com/starlingx/ansible-playbooks/commit/0a1c06a66bc286b306bfdf
External (al.bailey at windriver.com<mailto:al.bailey at windriver.com>)
  Report This Email<https://shared.outlook.inky.com/report?id=Y29tbXNjb3BlL2FsZXhhbmRlci53aWxsaWFtc0Bjb21tc2NvcGUuY29tLzBiODJlY2Y2NzU2MWMwNGMwNTg5MWE5NjE1MDliMTY0LzE2MjM3NzgzODAuNQ==#key=87c28075ba25598c49360a827e881c52>  FAQ<https://www.inky.com/banner-faq/>  Protection by INKY<https://www.inky.com>

I don't know if it helps, but that timeout had to be increased to 720 because it took a long time on certain hardware.
See: https://github.com/starlingx/ansible-playbooks/commit/0a1c06a66bc286b306bfdf4ada7cf823787b7a94<https://secure-web.cisco.com/1rtvBC54DiBT0voQgOdrZyNbePo_nNRupFCy4ahuOYXP50xfBFtoJ7NKghaRV6tez36Iu49Vq0s4kE5UbB2j2iMrDCZOXLIgUPGozwwA9v53iEYVOzx6lfqKiEOuUbSoBba5G2-S-2cBfUjLYMpC3G3j0jR487EQ_K8MR3RTGim1PHYpYkpTu-H6zf7PzXXajquNriTKW3Ex-jPUjasT5AGf8ublWh-QmQgObMLmczbiLItKBJOvivKaR1OrPLJO7XwQ2-6pOZXDZySXNI8WJt0yXi8n5FK8qu9rhAN5M3vNdgNOrZghMIz8FVn-dX3tQd-MqDu4KRxxrsxzddHkptQ/https%3A%2F%2Fgithub.com%2Fstarlingx%2Fansible-playbooks%2Fcommit%2F0a1c06a66bc286b306bfdf4ada7cf823787b7a94>

You may be able to increase the value even more.
The logs under /var/log/puppet should indicate if there was a failure, and if not, may indicate how long it took.

Al

From: Williams, Alexander <Alexander.Williams at commscope.com<mailto:Alexander.Williams at commscope.com>>
Sent: Tuesday, June 15, 2021 12:42 PM
To: starlingx-discuss at lists.starlingx.io<mailto:starlingx-discuss at lists.starlingx.io>
Subject: [Starlingx-discuss] Installation Problem: Configuration failed (Timeout at service endpoints reconfiguration)

[Please note: This e-mail is from an EXTERNAL e-mail address]
Hi all,

I'm in the process of installing StarlingX 4.0.1 as a Bare Metal AIO Duplex for a Central Cloud, and so far have been unable to progress past the ansible bootstrap step, where it fails at the step "Wait for service endpoints reconfiguration to complete".
I've attached the ansible.log from my most recent attempt to help debugging.
If it would help, I can also send the localhost.yml file I've been using and the sysinv.log.

Thank you in advance for any help you can offer.

Best,
Alex
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.starlingx.io/pipermail/starlingx-discuss/attachments/20210616/03a0ce62/attachment-0001.html>


More information about the Starlingx-discuss mailing list