[Starlingx-discuss] stx-openstack application applying failed

[open infra]

On Sun, Jun 27, 2021 at 4:48 PM Embedded Devel <lists at optimcloud.com> wrote:

>
>
> On Saturday 26 June 2021 20:17:36 PM (+07:00), Waines, Greg wrote:
>
> Agreed that increased docker fs is not documented well … especially if you
> need to increase the cgts_vg logical volume group in order to increase the
> docker filesystem size.  We have plans to fix this.
>
>
> Yupp seems this is exactly what i need also right now, as im running into
> the
>
>
> system host-fs-modify controller-0 docker=60
> HostFs update failed: Not enough free space on cgts-vg. Current free space
> 16 GiB, requested total increase 30 GiB
>
>
>
Please check if you have enough space (either disk or partitions) available
and if so, you can extend the logical volume.
I have used both methods (GUI and CLI).






>
>
>
> Greg.
>
>
>
> *From:* open infra <openinfradn at gmail.com>
> *Sent:* Friday, June 25, 2021 10:30 AM
> *To:* Zvonar, Bill <Bill.Zvonar at windriver.com>
> *Cc:* starlingx-discuss at lists.starlingx.io
> *Subject:* Re: [Starlingx-discuss] stx-openstack application applying
> failed
>
>
>
> [Please note: This e-mail is from an EXTERNAL e-mail address]
>
> Finally managed to deploy OpenStack but not sure what caused the issue.
>
> Increased disk capacity for docker in worker and reviewed network.
>
>
>
> On Thu, Jun 24, 2021 at 1:59 PM open infra <openinfradn at gmail.com> wrote:
>
> I managed to deploy stx-monitoring that require labelling only in
> controller nodes.
>
> Definitely something wrong with worker-0 labelling
>
>
>
>
>
> On Wed, Jun 23, 2021 at 8:52 PM open infra <openinfradn at gmail.com> wrote:
>
> Here is more information about the issue.
>
> http://paste.openstack.org/show/806872/
> <https://urldefense.com/v3/__http:/paste.openstack.org/show/806872/__;!!AjveYdw8EvQ!IqDey86XgSsb-XFryEq6evajkKBtzO0iqfvrTOhcD3HlCvV9FgK4c5QV8wSfkRJp74Y$>
>
>
>
> Then I set the  openstack-compute-node label to the controller-0 and
> re-apply stx-openstack (just to test).
>
> Then stx-openstack applying progress continued up to 55%.
>
>
>
> I can lock/unlcok the worker-0 via controller nodes. So, it should not be
> a problem with management network.
>
>
>
>
>
> On Mon, Jun 21, 2021 at 4:40 PM open infra <openinfradn at gmail.com> wrote:
>
> thank you Bill and Thiago.
>
> Now I have switched to Release 5.
>
> Don't we need to set following labels for release 5 deployment if we
> supposed to deploy stx-openstack?
>
>
>
> for controllers:
>
>
>
> system host-label-assign $NODE openstack-control-plane=enabled
>
>
>
> For worker nodes:
>
>
>
> system host-label-assign $NODE openstack-compute-node=enabled
>
> system host-label-assign $NODE openvswitch=enabled
>
>
>
> Because these labels are not visible in the release 5 installation guide.
>
>
>
> On Wed, May 26, 2021 at 9:11 PM Zvonar, Bill <Bill.Zvonar at windriver.com>
> wrote:
>
> Hi again Danishka, we discussed this too.
>
>
>
> It was suggested that you check /var/logs/armada to see if there are any
> Armada startup logs that’d help understand what’s going on.
>
>
>
> Thanks, Bill...
>
>
>
> *From:* open infra <openinfradn at gmail.com>
> *Sent:* Saturday, May 22, 2021 2:28 AM
> *To:* starlingx-discuss at lists.starlingx.io
> *Subject:* [Starlingx-discuss] stx-openstack application applying failed
>
>
>
> [Please note: This e-mail is from an EXTERNAL e-mail address]
>
> Hi,
>
>
>
> I have deployed StarlingX R4 (bare metal dedicated storage installation).
>
> stx-openstack application applying was failed.
>
>
>
> When I retrieve openstack pods, I can see the status *osh-openstack-garbd-garbd-7d4957d9f4-kz95v
> *is pending.
>
> I have re-uploaded stx-openstack but the same results.
>
>
>
> I highly appreciate it if someone can help to fix resolve this matter as
> we have a demo next week.
>
>
>
> More details available here.
>
> describe pod osh-openstack-garbd-garbd
>
> http://paste.openstack.org/show/805587/
> <https://urldefense.com/v3/__http:/paste.openstack.org/show/805587/__;!!AjveYdw8EvQ!IP_slcx9_D_pSzhjpom6niaG_xdFTyB63HZ2yV5p24SAYzk2f4dmWqMTpvLFhtiucGoh$>
>
> describe nodes http://paste.openstack.org/show/805589/
> <https://urldefense.com/v3/__http:/paste.openstack.org/show/805589/__;!!AjveYdw8EvQ!IP_slcx9_D_pSzhjpom6niaG_xdFTyB63HZ2yV5p24SAYzk2f4dmWqMTpvLFht7VU1um$>
>
>
>
> Regards,
>
> Danishka
>
>
> --
> Sent with Vivaldi Mail. Download Vivaldi for free at vivaldi.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.starlingx.io/pipermail/starlingx-discuss/attachments/20210628/6c02c873/attachment-0001.html>