[Starlingx-discuss] Installation services?
Embedded Devel
lists at optimcloud.com
Tue Jun 29 04:38:31 UTC 2021
On Tuesday 29 June 2021 11:02:17 AM (+07:00), Scott Peal wrote:
The Intel driver instructions needs rpmbuild (per link in first post). I am
not able to get "sudo yum install rpm-build" to work. It is going to an
"http://container:8080/......" url. However, dns is not resolving for
container. So I ran the container creation script using the IP of the 1G
NIC. Running the install for rpm-build now says I don't have permissions.
Note, ping to google.com resolves and works fine.
First question is, do we configure the physical NICs before we run
container scripts or after? If after, then how do I get permissions to
install rpm-build? If before, how do I get the repo to point to Centos (I
tried this too with no luck).
Note, I am running the simplex all-in-one bare metal install. I need to
test the NIC in one server before I buy all the other cards and cables.
Thanks for the advice...Scott
Okay even more confused, did you try to even install stx on bare metal with
these cards? I also have Intel based cards and they work fine with the
default bootimage.iso ... so What card do you have ?
[ 1.391014] e1000e: Intel(R) PRO/1000 Network Driver - 3.6.0-NAPI
[ 1.391014] e1000e: Copyright(c) 1999 - 2019 Intel Corporation.
[ 1.523964] Intel(R) 10GbE PCI Express Linux Network Driver - version
5.6.5
[ 1.526589] Copyright(c) 1999 - 2019 Intel Corporation.
[ 1.538384] igb: Intel(R) Gigabit Ethernet Network Driver - version
5.6.0-k
[ 1.538384] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 1.587381] igb 0000:05:00.0: Intel(R) Gigabit Ethernet Network
Connection
[ 1.701425] e1000e 0000:00:1f.6 eth1000: Intel(R) PRO/1000 Network
Connection
[ 1.712179] i40e: Intel(R) 40-10 Gigabit Ethernet Connection Network
Driver - version 2.14.13
[ 1.714280] i40e: Copyright(c) 2013 - 2020 Intel Corporation.
[ 1.718167] iavf: Intel(R) Ethernet Adaptive Virtual Function Network
Driver - version 4.0.1
[ 1.720336] Copyright (c) 2013, Intel Corporation.
[ 1.729075] ice: Intel(R) Ethernet Connection E800 Series Linux Driver -
version 1.2.1
[ 1.731263] ice: Copyright (C) 2018-2019, Intel Corporation.
[ 1.785127] ixgbe 0000:02:00.0 eth1000: Intel(R) 10 Gigabit Network
Connection
[ 2.066041] ixgbe 0000:02:00.1 eth1001: Intel(R) 10 Gigabit Network
Connection
[ 2.071970] ixgbevf: Intel(R) 10GbE PCI Express Virtual Function Driver
- version 4.6.3
On Mon, Jun 28, 2021 at 10:08 PM, Embedded Devel
<lists at optimcloud.com> wrote:
On Tuesday 29 June 2021 06:55:46 AM (+07:00), Scott Peal wrote:
Hello everyone,
Does anyone know someone who can install StarlingX with OpenStack/K8m
remotely at a fair price? I have tried multiple times but not getting
anywhere. Stuck on figuring out how to install the NIC drivers and set up
the VLANs correctly.
its really pretty straight forward to install, not sure what you mean by
"install the NIC drivers", unless they are "unsupported" cards, then its
alot of work for building a custom image.
so what cards are they that require "installing NIC drivers" ? or are you
guessing really ?
Servers:
- 2 controllers
- 2 Rook/Ceph storage
- 8 hosts/workers
- Dell PowerEdge C6100 X5650 dual Xeon hex-cores
Networking:
- Dual 10GbE NICs in each server
- Dual 1GbE NICs in each server
- Dual Dell S6010 switches running FTOS 9.x
I am a one man band so not a lot of funds, but getting someone to show me
the ropes would be worth it.
Regards,
Scott
--
Sent with Vivaldi Mail. Download Vivaldi for free at vivaldi.com
--
Sent with Vivaldi Mail. Download Vivaldi for free at vivaldi.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.starlingx.io/pipermail/starlingx-discuss/attachments/20210629/933e06ea/attachment-0001.html>
More information about the Starlingx-discuss
mailing list