[Starlingx-discuss] How to get standby controller as active after active controller down

[Waines, Greg]

The standby controller should automatically ‘become active’ on detecting that the previously active controller is failed.
Greg.

From: open infra <openinfradn at gmail.com>
Sent: Wednesday, July 5, 2023 6:02 AM
To: StarlingX ML <starlingx-discuss at lists.starlingx.io>
Subject: [Starlingx-discuss] How to get standby controller as active after active controller down

CAUTION: This email comes from a non Wind River email account!
Do not click links or open attachments unless you recognize the sender and know the content is safe.
Hi,

In a stx  standard dedicated storage setup, active controller was down (disk failure).
Now I need to get the stand by controller as the active controller (in order to get the failed controller up and running).

swatc is required to run in an active controller.
So, how to make stand by as the active controller itself?

Regards,
Danishka
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.starlingx.io/pipermail/starlingx-discuss/attachments/20230710/f41baa7d/attachment.htm>