Hi Austin, 1. - Here is the spec Intel(R) Xeon(R) CPU D-1557 @ 1.50GHz RAM : 32GB (Is this the problem? I already saw for the controller 64GB RAM is needed, but I'm not sure, cause the installation was just stuck literally, SSD : 500GB SuperMicro - Bios Setting: I enabled and disabled as the instruction said. And at first try, I didn't used UEFI, after failure, I changed it into UEFI, but the result was same. I enabled VTx/Iommu enable or not ? 2. I used bare metal one.. however when I pressed the buttons, nothing happened. And the controller-1 is just stopped as I said before. Thank you for helping me :) Best Regards, Jaewook. 2019년 2월 22일 (금) 오후 5:02, Sun, Austin <austin.sun@intel.com>님이 작성:
Hi Jaewook:
1. Could you share the hw info for controller-1 ? and check bios setting ? is it using UEFI ? VTx/Iommu enable or not ?
2. Could you try access controller-1 and press Alt+F10 to see any log if the system is bare metal ?
Thanks.
BR Austin Sun.
*From:* Jaewook Oh [mailto:kyle.oh95@gmail.com] *Sent:* Friday, February 22, 2019 2:54 PM *To:* starlingx-discuss <starlingx-discuss@lists.starlingx.io> *Subject:* [Starlingx-discuss] Duplex PXE Booting seems failed
Hello StarlingX Team,
I finally solved the horizon error, the port number was different.
I don't know why the port was changed, but anyway the port number was 8080, not 80.
But I'm now facing new obstacles, Duplex PXE Booting.
I succeed to connect PXE mode, but no more process..
In Controller-0, I can find below result,