Dear Pratik, I don't know the root cause. But i think this could workaround. You should have two hard disk. Go to the shell (ctrl+b+2) and use fdisk command to clear all your partitions on your hard disks and create new clear partition. Then use bootable usb to install STX again. You can try it. Thanks Pratik M. <pvmpublic@gmail.com> 於 2019年9月10日 週二 下午5:25寫道:
Hi, The screenshot did not make it through since email exceeded mailer limit. Trying again.
The error is "ERROR: Specified installation (sda) or boot (sda) device is a USB drive."
Thanks in advance
On Tue, Sep 10, 2019 at 2:30 PM Ezpeer Chen <ezpeerchen@gmail.com> wrote:
Dear Pratik,
I can't see your screenshot .
What's your installation issue now ?
Best regards,
Pratik M. <pvmpublic@gmail.com> 於 2019年9月10日 週二 下午4:40寫道:
[re-sending since the previous message exceeded msg-size] Hi, I cannot seem to install the STX R2 iso using a USB key, since the SATA device naming on my server ends up assigning /dev/sda to the USB key (screenshot attached). And I believe the installer assumes the root device as /dev/sda.
I tried both legacy and UEFI boot.
Also what is the way to get to a root shell during the ananconda install? tty2 has a login prompt. I tried sysadmin/root with sysadmin/St8rlingX* combinations, to no avail.
Thanks in advance Pratik
_______________________________________________ Starlingx-discuss mailing list Starlingx-discuss@lists.starlingx.io http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss