Hi Lokendra, Anirudh, and team, Thanks for submitting the STX Documentation launchpad for your issue: https://bugs.launchpad.net/starlingx/+bug/1915285 We discussed it at our Docs meeting and wanted to point you to the Node Management Guide for more info. Here are some relevant sections that may be helpful: https://docs.starlingx.io/node_management/starlingx-kubernetes/node_interfac... https://docs.starlingx.io/node_management/starlingx-kubernetes/node_interfac... https://docs.starlingx.io/node_management/starlingx-kubernetes/node_interfac... Good luck, Mary Camp Kelly Services Technical Writer | maryx.camp@intel.com<mailto:maryx.camp@intel.com> From: Lokendra Singh Rathour <Lokendra.Rathour@hsc.com> Sent: Monday, February 8, 2021 11:49 PM To: starlingx-discuss@lists.starlingx.io Subject: Re: [Starlingx-discuss] [STARLINGX 4.0] APPLICATION UPLOAD GETTING FAILED - with LAG Interface Hi Team, Any update with respect the Query raised!! Best Regards, Lokendra From: Lokendra Singh Rathour Sent: Friday, February 5, 2021 5:27 PM To: starlingx-discuss@lists.starlingx.io<mailto:starlingx-discuss@lists.starlingx.io> Subject: [STARLINGX 4.0] APPLICATION UPLOAD GETTING FAILED - with LAG Interface Hello Team, We are trying to setup dedicated Storage setup using StarlingX 4.0 over which we have certain observations/Error during the time of worker Node Configuration for the LAG type Data interfaces. Though we have tweaked the procedure a bit and successfully unlocked the Worker Nodes,we are facing the error in upload the STX Application packages. Steps as followed: STEP 1: We have created bonds for Data Network on Worker Node(reference document: https://docs.starlingx.io/configuration/host_interface_network_config.html#:....) * system host-if-add worker-1 -m 1500 -a active_standby data1bond ae eth1 eth2 * system host-if-add worker-1 -m 1500 -a active_standby data2bond ae eth3 eth4 STEP 2: Then further as per the main documents when Configuring data interfaces for worker nodes ( reference document: https://docs.starlingx.io/deploy_install_guides/r4_release/bare_metal/dedica...) * SPL=/tmp/tmp-system-port-list * SPIL=/tmp/tmp-system-host-if-list Above files does not have the information of the created Bond interfaces for data Nodes, Further in order to get the the value of ${DATA0IFUUID} and ${DATA1IFUUID} below mentioned commands are executed: DATA0IF=<DATA-0-PORT> DATA1IF=<DATA-1-PORT> PHYSNET0='physnet0' PHYSNET1='physnet1' SPL=/tmp/tmp-system-port-list SPIL=/tmp/tmp-system-host-if-list # configure the datanetworks in sysinv, prior to referencing it # in the ``system host-if-modify`` command'. system datanetwork-add ${PHYSNET0} vlan system datanetwork-add ${PHYSNET1} vlan for NODE in worker-0 worker-1; do echo "Configuring interface for: $NODE" set -ex system host-port-list ${NODE} --nowrap > ${SPL} system host-if-list -a ${NODE} --nowrap > ${SPIL} DATA0PCIADDR=$(cat $SPL | grep $DATA0IF |awk '{print $8}') DATA1PCIADDR=$(cat $SPL | grep $DATA1IF |awk '{print $8}') DATA0PORTUUID=$(cat $SPL | grep ${DATA0PCIADDR} | awk '{print $2}') DATA1PORTUUID=$(cat $SPL | grep ${DATA1PCIADDR} | awk '{print $2}') DATA0PORTNAME=$(cat $SPL | grep ${DATA0PCIADDR} | awk '{print $4}') DATA1PORTNAME=$(cat $SPL | grep ${DATA1PCIADDR} | awk '{print $4}') DATA0IFUUID=$(cat $SPIL | awk -v DATA0PORTNAME=$DATA0PORTNAME '($12 ~ DATA0PORTNAME) {print $2}') DATA1IFUUID=$(cat $SPIL | awk -v DATA1PORTNAME=$DATA1PORTNAME '($12 ~ DATA1PORTNAME) {print $2}') system host-if-modify -m 1500 -n data0 -c data ${NODE} ${DATA0IFUUID} system host-if-modify -m 1500 -n data1 -c data ${NODE} ${DATA1IFUUID} system interface-datanetwork-assign ${NODE} ${DATA0IFUUID} ${PHYSNET0} system interface-datanetwork-assign ${NODE} ${DATA1IFUUID} ${PHYSNET1} set +ex done But in our case these values in the variable(${DATA0IFUUID} and ${DATA1IFUUID}) were not getting populated, therefore we have used the UUID received from command : System host-if-list worker-0 System host-if-list worker-1 We observed that UUID of any ethernet interface mentioned in the file (SPIL=/tmp/tmp-system-host-if-list ) matches with the UUID obtained by running the above command(System host-if-list worker-0 ) , so as we did not get the UUID from the file in case LAG Bonds we passed the Values of UUID directly. STEP 3: Using the change, we were able to successfully unlock the worker Nodes. [sysadmin@controller-0 ~(keystone_admin)]$ system host-list +----+--------------+-------------+----------------+-------------+--------------+ | id | hostname | personality | administrative | operational | availability | +----+--------------+-------------+----------------+-------------+--------------+ | 1 | controller-0 | controller | unlocked | enabled | available | | 2 | controller-1 | controller | unlocked | enabled | available | | 3 | storage-0 | storage | unlocked | enabled | available | | 4 | storage-1 | storage | unlocked | enabled | available | | 5 | worker-0 | worker | unlocked | enabled | available | | 6 | worker-1 | worker | unlocked | enabled | available | +----+--------------+-------------+----------------+-------------+--------------+ STEP 4: Then Further while running the application-upload: system application-upload stx-openstack-<version>-centos-stable-versioned.tgz Error as below was seen Error: 2021-02-05 07:46:40.318 113059 ERROR sysinv.conductor.kube_app File "/usr/lib64/python2.7/site-packages/sysinv/helm/helm.py", line 317, in _get_helm_chart_overrides 2021-02-05 07:46:40.318 113059 ERROR sysinv.conductor.kube_app cnamespace)) 2021-02-05 07:46:40.318 113059 ERROR sysinv.conductor.kube_app File "/opt/platform/helm/20.06/stx-openstack/1.0-49-centos-stable-versioned/plugins/k8sapp_openstack/helm/neutron.py", line 45, in get_overrides 2021-02-05 07:46:40.318 113059 ERROR sysinv.conductor.kube_app 'hosts': self._get_per_host_overrides() 2021-02-05 07:46:40.318 113059 ERROR sysinv.conductor.kube_app File "/opt/platform/helm/20.06/stx-openstack/1.0-49-centos-stable-versioned/plugins/k8sapp_openstack/helm/neutron.py", line 105, in _get_per_host_overrides 2021-02-05 07:46:40.318 113059 ERROR sysinv.conductor.kube_app 'auto_bridge_add': self._get_host_bridges(host)}) 2021-02-05 07:46:40.318 113059 ERROR sysinv.conductor.kube_app File "/opt/platform/helm/20.06/stx-openstack/1.0-49-centos-stable-versioned/plugins/k8sapp_openstack/helm/neutron.py", line 141, in _get_host_bridges 2021-02-05 07:46:40.318 113059 ERROR sysinv.conductor.kube_app port_name = self._get_interface_port_name(iface) 2021-02-05 07:46:40.318 113059 ERROR sysinv.conductor.kube_app File "/opt/platform/helm/20.06/stx-openstack/1.0-49-centos-stable-versioned/plugins/k8sapp_openstack/helm/neutron.py", line 280, in _get_interface_port_name 2021-02-05 07:46:40.318 113059 ERROR sysinv.conductor.kube_app assert iface['iftype'] == constants.INTERFACE_TYPE_ETHERNET 2021-02-05 07:46:40.318 113059 ERROR sysinv.conductor.kube_app AssertionError 2021-02-05 07:46:40.318 113059 ERROR sysinv.conductor.kube_app Kindly check and help in advising the way forward here w.r.t. as 1. does starlingx support for the bond interface for the Data Networks ? * if yes then do we have any supported document w.r.t the same. Reference Documents: For Deployment: https://docs.starlingx.io/deploy_install_guides/r4_release/bare_metal/dedica... For LAG : : https://docs.starlingx.io/configuration/host_interface_network_config.html#:... DISCLAIMER: This electronic message and all of its contents, contains information which is privileged, confidential or otherwise protected from disclosure. The information contained in this electronic mail transmission is intended for use only by the individual or entity to which it is addressed. If you are not the intended recipient or may have received this electronic mail transmission in error, please notify the sender immediately and delete / destroy all copies of this electronic mail transmission without disclosing, copying, distributing, forwarding, printing or retaining any part of it. Hughes Systique accepts no responsibility for loss or damage arising from the use of the information transmitted by this email including damage from virus.