Unfortunately, still I cannot access dashboard. I'll try another latest boot image. Thank you for all helps :) BR. Jaewook. 2019년 2월 19일 (화) 오후 4:16, xiongzhiwei@baicells.com <xiongzhiwei@baicells.com>님이 작성:
Hi Jaewook,
My ip setting is as below: Actually, I had used three physical interface, enp2s0f0 is OAM inf with default ip 10.10.10.2/24, because it is not inconvenient in my operation room, so I had configured enp2s0f1 for my romote access. I can access the dashboard both with ip 10.10.10.2 in lab and 192.168.107.232/22 in my operation room. The third inf enp2s0f2 is used to data interface, I had created three VMs and network worked normally.
controller-0:~$ ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet 192.168.204.3/28 brd 192.168.204.15 scope host lo valid_lft forever preferred_lft forever inet 169.254.202.2/24 scope host lo valid_lft forever preferred_lft forever inet 192.168.204.2/28 scope host secondary lo valid_lft forever preferred_lft forever inet 192.168.204.5/28 scope host secondary lo valid_lft forever preferred_lft forever inet 192.168.204.10/28 scope host secondary lo valid_lft forever preferred_lft forever inet 192.168.204.6/28 scope host secondary lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: enp4s0f0: <BROADCAST,MULTICAST> mtu 1500 qdisc mq state DOWN group default qlen 1000 link/ether 00:1b:21:bc:ff:a8 brd ff:ff:ff:ff:ff:ff 3: enp2s0f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000 link/ether f8:75:88:6e:8f:e2 brd ff:ff:ff:ff:ff:ff inet 10.10.10.2/24 brd 10.10.10.255 scope global enp2s0f0 valid_lft forever preferred_lft forever inet6 fe80::fa75:88ff:fe6e:8fe2/64 scope link valid_lft forever preferred_lft forever 4: enp2s0f1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000 link/ether f8:75:88:6e:8f:e3 brd ff:ff:ff:ff:ff:ff inet 192.168.107.232/22 brd 192.168.107.255 scope global enp2s0f1 valid_lft forever preferred_lft forever inet6 fe80::fa75:88ff:fe6e:8fe3/64 scope link valid_lft forever preferred_lft forever 6: enp2s0f3: <BROADCAST,MULTICAST> mtu 1500 qdisc mq state DOWN group default qlen 1000 link/ether f8:75:88:6e:8f:e5 brd ff:ff:ff:ff:ff:ff 7: ovs-netdev: <BROADCAST,PROMISC> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 8e:da:6c:1b:fd:15 brd ff:ff:ff:ff:ff:ff 8: br-int: <BROADCAST,PROMISC> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether f6:df:04:bf:a1:43 brd ff:ff:ff:ff:ff:ff 12: br-phy0: <BROADCAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN group default qlen 1000 link/ether f8:75:88:6e:8f:e4 brd ff:ff:ff:ff:ff:ff inet6 fe80::fa75:88ff:fe6e:8fe4/64 scope link valid_lft forever preferred_lft forever 13: lldp0d64ae5d-22: <BROADCAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN group default qlen 1000 link/ether 96:e0:03:51:17:6d brd ff:ff:ff:ff:ff:ff inet6 fe80::94e0:3ff:fe51:176d/64 scope link valid_lft forever preferred_lft forever
BR Tim Xiong
*From:* Jaewook Oh <kyle.oh95@gmail.com> *Date:* 2019-02-19 15:00 *To:* xiongzhiwei@baicells.com *CC:* starlingx-discuss <starlingx-discuss@lists.starlingx.io>; 오재욱 <jwoh95@dcn.ssu.ac.kr> *Subject:* Re: [Starlingx-discuss] [deploy-fail] Failed to deploy All-in-one simplex configuration Hello Tim,
thanks for your answer :)
However, still I cannot access to the dashboard.
I deployed StarlingX 3 times again, but the situation never changes..
If you don't mind, can I see your ip setting with (ip a command)?
Best Regards, Jaewook.
2019년 2월 19일 (화) 오후 3:56, xiongzhiwei@baicells.com < xiongzhiwei@baicells.com>님이 작성:
Hi Jaewook,
I just finished stx all-in-one simplex on Bearmetal last week. The horizon service had been installed defaultly and you should be able to access the dashboard now. Your service list is same as mine.
[wrsroot@controller-0 ~(keystone_admin)]$ openstack service list +----------------------------------+------------+-----------------+ | ID | Name | Type | +----------------------------------+------------+-----------------+ | c51dfde10adf4445a78113ad6e648b9a | barbican | key-manager | | df07161f527b483292ac5aa5ed722687 | keystone | identity | | 744183df128d414f97390fb70fcac72f | sysinv | platform | | b9730f2e673443e4a6d003a7dad1d220 | fm | faultmanagement | | 5d7855696b1f440b8401670e1df6cb28 | glance | image | | 814a777c22884c97ab44baf0a4c2c669 | aodh | alarming | | 68362243cc214c4181a15e583894e495 | placement | placement | | 375cfb87c5f6449e81512ead128a513e | gnocchi | metric | | 2643dadbe71b4fc68ad4daa7d9d3859f | nova | compute | | f312a1c459c245c5a045c69688f695db | heat-cfn | cloudformation | | cbf811729020470a81b3c7be0d453fc9 | neutron | network | | 0fb46b24873648f9bac3a3e4d9f1f4e2 | patching | patching | | 52db1ccfca9d4033be5f1180c50d8234 | ceilometer | metering | | 094935b6dee245278bffc3f7ee21e9e9 | vim | nfv | | bc5297541def4f8b8881254af9896824 | smapi | smapi | | a388667479484a04824f07a672a331eb | panko | event | | 8c982073cd6c4d04b6ecb49e76650d2c | heat | orchestration | | 38c0b001ef514af5b1ba6947bed1bc6c | cinderv3 | volumev3 | | 98699ea84e4543b6b0808e24395542bb | cinderv2 | volumev2 | | 253390980b274178b7a16844e2c7a826 | cinder | volume | +----------------------------------+------------+-----------------+
BR Tim Xiong
*From:* Jaewook Oh <kyle.oh95@gmail.com> *Date:* 2019-02-19 12:48 *To:* starlingx-discuss <starlingx-discuss@lists.starlingx.io>; 오재욱 <jwoh95@dcn.ssu.ac.kr> *Subject:* Re: [Starlingx-discuss] [deploy-fail] Failed to deploy All-in-one simplex configuration Hello StarlingX Teams,
I found that *the horizon dashboard project were not installed automatically* when I deployed StarlingX all-in-one simplex on Baremetal. Are there any reason for this problem..? I used "2019-*Feb-08* 03:40:29 bootimage.iso".
[wrsroot@controller-0 ~(keystone_admin)]$ openstack service list +----------------------------------+------------+-----------------+ | ID | Name | Type | +----------------------------------+------------+-----------------+ | f8b821fdd8e44d8484a3521ade041340 | barbican | key-manager | | 6f34b6874b624604a7f8798b95743dc4 | keystone | identity | | d31b2325f40e4ce88ca6974ee852eff6 | sysinv | platform | | cb68c2d74dc34caf91dfc92c9b099d22 | fm | faultmanagement | | a7f2ae41f2ff45bd904012a0a53b63ec | glance | image | | 3daea4e7507a4568a132579b4f30e4d6 | aodh | alarming | | af6e9c3f185f498a8f8b7d1afaeaa06d | placement | placement | | b1c2243ab7e24fe08bf408677a7f8e1d | gnocchi | metric | | 0e21d579ddee4f2dbfe98ff4069ce321 | nova | compute | | 15067bfe219b4645973f7399099c47da | heat-cfn | cloudformation | | ecf3478c84334c2ba647740bde190739 | neutron | network | | 28973cbc638c41c6b99b5e77264a2aec | patching | patching | | a120d0d2ed0b45b39114e4e9cab5fd78 | ceilometer | metering | | 12b32e4a181a4684ab05be02b3726d0c | vim | nfv | | a9c28c1889a347359a9b77edf53e5833 | smapi | smapi | | 2697e71aa8dc4f8b8d96c72b32c89440 | panko | event | | 57a5cb58128445b5819747271c095a89 | heat | orchestration | | 10c93aecb5a84278b940da2f8c3a1721 | cinderv3 | volumev3 | | b569ff8b77364311bbf3a5dee38dd614 | cinderv2 | volumev2 | | 449ceb89f8fe40779dd65c5a9c867161 | cinder | volume | +----------------------------------+------------+-----------------+
I thought horizon should also be installed with StarlingX's deployment. If not, please let me know how can I install horizon in this StarlingX.
Thanks for help in advance :)
Best Regards, Jaewook.
2019년 2월 12일 (화) 오후 2:54, Jaewook Oh <kyle.oh95@gmail.com>님이 작성:
Hello starlingx team,
I deployed Starlingx All-in-one simplex setting on my server, it seems deployment was done well. *However I cannot access to the dashboard.*
I used "2019-*Feb-08* 03:40:29 bootimage.iso".
Following log is the service that are now enabled, [wrsroot@controller-0 ~(keystone_admin)]$ system service-list +-----+-------------------------------+--------------+----------------+ | id | service_name | hostname | state | +-----+-------------------------------+--------------+----------------+ | 68 | aodh-api | controller-0 | enabled-active | | 69 | aodh-evaluator | controller-0 | enabled-active | | 70 | aodh-listener | controller-0 | enabled-active | | 71 | aodh-notifier | controller-0 | enabled-active | | 102 | barbican-api | controller-0 | enabled-active | | 103 | barbican-keystone-listener | controller-0 | enabled-active | | 104 | barbican-worker | controller-0 | enabled-active | | 43 | ceilometer-agent-notification | controller-0 | enabled-active | | 14 | cgcs-export-fs | controller-0 | enabled-active | | 10 | cgcs-fs | controller-0 | enabled-active | | 16 | cgcs-nfs-ip | controller-0 | enabled-active | | 35 | cinder-api | controller-0 | enabled-active | | 38 | cinder-backup | controller-0 | enabled-active | | 58 | cinder-ip | controller-0 | enabled-active | | 56 | cinder-lvm | controller-0 | enabled-active | | 36 | cinder-scheduler | controller-0 | enabled-active | | 37 | cinder-volume | controller-0 | enabled-active | | 23 | dnsmasq | controller-0 | enabled-active | | 5 | drbd-cgcs | controller-0 | enabled-active | | 55 | drbd-cinder | controller-0 | enabled-active | | 75 | drbd-extension | controller-0 | enabled-active | | 3 | drbd-pg | controller-0 | enabled-active | | 6 | drbd-platform | controller-0 | enabled-active | | 4 | drbd-rabbit | controller-0 | enabled-active | | 77 | extension-export-fs | controller-0 | enabled-active | | 76 | extension-fs | controller-0 | enabled-active | | 24 | fm-mgr | controller-0 | enabled-active | | 27 | glance-api | controller-0 | enabled-active | | 26 | glance-registry | controller-0 | enabled-active | | 108 | gnocchi-api | controller-0 | enabled-active | | 109 | gnocchi-metricd | controller-0 | enabled-active | | 62 | guest-agent | controller-0 | enabled-active | | 64 | haproxy | controller-0 | enabled-active | | 45 | heat-api | controller-0 | enabled-active | | 46 | heat-api-cfn | controller-0 | enabled-active | | 47 | heat-api-cloudwatch | controller-0 | enabled-active | | 44 | heat-engine | controller-0 | enabled-active | | 51 | horizon | controller-0 | enabled-active | | 22 | hw-mon | controller-0 | enabled-active | | 57 | iscsi | controller-0 | enabled-active | | 25 | keystone | controller-0 | enabled-active | | 50 | lighttpd | controller-0 | enabled-active | | 2 | management-ip | controller-0 | enabled-active | | 20 | mtc-agent | controller-0 | enabled-active | | 28 | neutron-server | controller-0 | enabled-active | | 9 | nfs-mgmt | controller-0 | enabled-active | | 29 | nova-api | controller-0 | enabled-active | | 63 | nova-api-proxy | controller-0 | enabled-active | | 31 | nova-conductor | controller-0 | enabled-active | | 33 | nova-console-auth | controller-0 | enabled-active | | 34 | nova-novnc | controller-0 | enabled-active | | 83 | nova-placement-api | controller-0 | enabled-active | | 30 | nova-scheduler | controller-0 | enabled-active | | 48 | open-ldap | controller-0 | enabled-active | | 82 | panko-api | controller-0 | enabled-active | | 52 | patch-alarm-manager | controller-0 | enabled-active | | 7 | pg-fs | controller-0 | enabled-active | | 15 | platform-export-fs | controller-0 | enabled-active | | 11 | platform-fs | controller-0 | enabled-active | | 17 | platform-nfs-ip | controller-0 | enabled-active | | 12 | postgres | controller-0 | enabled-active | | 65 | pxeboot-ip | controller-0 | enabled-active | | 13 | rabbit | controller-0 | enabled-active | | 8 | rabbit-fs | controller-0 | enabled-active | | 49 | snmp | controller-0 | enabled-active | | 19 | sysinv-conductor | controller-0 | enabled-active | | 18 | sysinv-inv | controller-0 | enabled-active | | 59 | vim | controller-0 | enabled-active | | 60 | vim-api | controller-0 | enabled-active | | 61 | vim-webserver | controller-0 | enabled-active | +-----+-------------------------------+--------------+----------------+
As you can see, *I cannot find #1 service (oam-ip)*, and I think this is one of the main reasons.
*And also I had a problem when I followed the installation instruction.*
[wrsroot@controller-0 ~(keystone_admin)]$ neutron providernet-create providernet-a --type=vlan [wrsroot@controller-0 ~(keystone_admin)]$ neutron providernet-range-create --name providernet-a-range1 --range 100-400 providernet-a
[wrsroot@controller-0 ~(keystone_admin)]$ system host-if-modify -c data controller-0 eth1000 -p providernet-a
Above instruction was not naturally worked, I mean the third command, 'host-if-modify' failed with the message "*DataNetwork providernet-a could not be found*."
So I googled and I figured out I should command $ *system datanetwork-add providernet-a vlan* first.
But I remember when my first deployment succeed, I didn't need to use that command at all. (The deployment was implemented on Jan.)
Any help is appreciated, thank you for your help in advance.
Best Regards, Jaewook.
================================================ *Jaewook Oh* (오재욱) IISTRC - Internet Infra System Technology Research Center 369 Sangdo-ro, Dongjak-gu, 06978, Seoul, Republic of Korea
-- ================================================ *Jaewook Oh* (오재욱) IISTRC - Internet Infra System Technology Research Center 369 Sangdo-ro, Dongjak-gu, 06978, Seoul, Republic of Korea
-- ================================================ *Jaewook Oh* (오재욱) IISTRC - Internet Infra System Technology Research Center 369 Sangdo-ro, Dongjak-gu, 06978, Seoul, Republic of Korea
-- ================================================ *Jaewook Oh* (오재욱) IISTRC - Internet Infra System Technology Research Center 369 Sangdo-ro, Dongjak-gu, 06978, Seoul, Republic of Korea