Hi Jaewook, For the 8080 change, you could find the history in below mail: http://lists.starlingx.io/pipermail/starlingx-discuss/2019-February/003017.h... For the PXE mode, you could use “system host-show controller-1 | grep install” to get controller-1 install status. Please make sure controller-1 is configured to boot with disk first. Just manuall choose pxeboot for the first time installation. Otherwise, if controller-1 is configured to using pxeboot as first priority, it will lead to deadloop of installation. Best Regards Shuicheng From: Jaewook Oh [mailto:kyle.oh95@gmail.com] Sent: Friday, February 22, 2019 2:54 PM To: starlingx-discuss <starlingx-discuss@lists.starlingx.io> Subject: [Starlingx-discuss] Duplex PXE Booting seems failed Hello StarlingX Team, I finally solved the horizon error, the port number was different. I don't know why the port was changed, but anyway the port number was 8080, not 80. But I'm now facing new obstacles, Duplex PXE Booting. I succeed to connect PXE mode, but no more process.. In Controller-0, I can find below result, [image.png] And another node that should've been controller-1, shows below letters on the display. 1) All-in-one Loading rel-19.01/installer-bzImage......... Loading rel-19.01/installer-initrd............................................................................ready. I waited this task for a day, but no changes. Any help would be very appreciated. Best Regards, Jaewook. ================================================ Jaewook Oh (오재욱) IISTRC - Internet Infra System Technology Research Center 369 Sangdo-ro, Dongjak-gu, 06978, Seoul, Republic of Korea
