[Starlingx-discuss] StarlingX 2.0 Duplex Controller in Active/Active HA

[Anirudh Gupta]

Hi Shuicheng,

All the services on the Active Controller are "enabled-active" and I can see some services "enabled-standby" on the standby controller.

Is there any way we can set all the Openstack Services "enabled-active" on both the Active and Standby Node?

Regards
Anirudh Gupta

From: Lin, Shuicheng <shuicheng.lin at intel.com>
Sent: 01 December 2019 12:42
To: Anirudh Gupta <Anirudh.Gupta at hsc.com>; starlingx-discuss at lists.starlingx.io
Subject: RE: [Starlingx-discuss] StarlingX 2.0 Duplex Controller in Active/Active HA

Hi Anirudh,
Per my understanding, for duplex, there is always 1 active node and 1 standby node.
The "active/active" or "active/standby" in the document is for "services", not for node.
If you try to run "sudo sm-dump" in the standby node, you will find some services are "active", while some services are "standby".

For the 2nd question, VMs are running in compute node. And for duplex, both controller nodes are compute nodes also.
And the "Active/Standby" is for controller, not for compute function, that is why VMs will run in both node.

Best Regards
Shuicheng

From: Anirudh Gupta <Anirudh.Gupta at hsc.com<mailto:Anirudh.Gupta at hsc.com>>
Sent: Thursday, November 28, 2019 11:45 AM
To: starlingx-discuss at lists.starlingx.io<mailto:starlingx-discuss at lists.starlingx.io>; starlingx-announce at lists.starlingx.io<mailto:starlingx-announce at lists.starlingx.io>
Subject: Re: [Starlingx-discuss] StarlingX 2.0 Duplex Controller in Active/Active HA

Hi Team,

Can someone please give me any update on my Query:

I need to install StarlingX 2.0 Duplex Bare Metal.
As per the document, there can be 2 modes in which HA controllers can be configure i.e. either "active/active" or "active/standby"
https://docs.starlingx.io/deploy_install_guides/r2_release/bare_metal/aio_duplex.html<https://ind01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fdocs.starlingx.io%2Fdeploy_install_guides%2Fr2_release%2Fbare_metal%2Faio_duplex.html&data=02%7C01%7C%7Caf8b5d79c9114374fe2e08d7762db764%7Ca65543b9ae9349b580f00b85821adc50%7C1%7C0%7C637107811065245473&sdata=H9XguQ995ujZB%2Fg1rICy9mE8ysWCl9Tybon1vR9uk4E%3D&reserved=0>


  *   Can someone please suggest the steps to configure Active-Active state?
  *   I have 2 kubernetes pods corresponding to each Openstack Service in Duplex Setup and when I spawn any VM, it goes on any of the two controllers. So, is this the standard implementation in StarlingX? What needs to be done in Active-Standby configuration?
  *   And, what difference it would have on my deployment in terms of functionality?

Regards
Anirudh Gupta


From: Anirudh Gupta
Sent: 26 November 2019 10:30
To: starlingx-discuss at lists.starlingx.io<mailto:starlingx-discuss at lists.starlingx.io>; starlingx-announce at lists.starlingx.io<mailto:starlingx-announce at lists.starlingx.io>
Subject: StarlingX 2.0 Duplex Controller in Active/Active HA

Hi Team,

I need to install StarlingX 2.0 Duplex Bare Metal.
As per the document, there can be 2 modes in which HA controllers can be configure i.e. either "active/active" or "active/standby"
https://docs.starlingx.io/deploy_install_guides/r2_release/bare_metal/aio_duplex.html<https://ind01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fdocs.starlingx.io%2Fdeploy_install_guides%2Fr2_release%2Fbare_metal%2Faio_duplex.html&data=02%7C01%7C%7Caf8b5d79c9114374fe2e08d7762db764%7Ca65543b9ae9349b580f00b85821adc50%7C1%7C0%7C637107811065255468&sdata=FqaK%2Bp%2FCGuqcu6XWC6cpHnd0eyJFZbi7WlAHOpDuWcY%3D&reserved=0>

Can someone please suggest the steps to configure Active-Active state?
And, what difference it would have on my deployment in terms of functionality?


Regards
Anirudh Gupta

DISCLAIMER: This electronic message and all of its contents, contains information which is privileged, confidential or otherwise protected from disclosure. The information contained in this electronic mail transmission is intended for use only by the individual or entity to which it is addressed. If you are not the intended recipient or may have received this electronic mail transmission in error, please notify the sender immediately and delete / destroy all copies of this electronic mail transmission without disclosing, copying, distributing, forwarding, printing or retaining any part of it. Hughes Systique accepts no responsibility for loss or damage arising from the use of the information transmitted by this email including damage from virus.
DISCLAIMER: This electronic message and all of its contents, contains information which is privileged, confidential or otherwise protected from disclosure. The information contained in this electronic mail transmission is intended for use only by the individual or entity to which it is addressed. If you are not the intended recipient or may have received this electronic mail transmission in error, please notify the sender immediately and delete / destroy all copies of this electronic mail transmission without disclosing, copying, distributing, forwarding, printing or retaining any part of it. Hughes Systique accepts no responsibility for loss or damage arising from the use of the information transmitted by this email including damage from virus.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.starlingx.io/pipermail/starlingx-discuss/attachments/20191202/565b138e/attachment-0001.html>