[Starlingx-discuss] Duplex PXE Booting seems failed

[Jaewook Oh]

Hi Shuicheng,
Thank you for your kind explain :)

For the port one, it really was understandable why the port had been
changed.

But for the PXE one, still I couldn't get any change.

As you said, system host-show controller-1 | grep install does not change
from the first one

install_output = text
install_state = None
install_state_info = None

And also, the display doesn't seem to be changed. It does not reboot at all.
It keeps showing

1) All-in-one

Loading rel-19.01/installer-bzImage.........
Loading
rel-19.01/installer-initrd............................................................................ready.

Again..
I rechecked my BIOS setting, but it was not the problem.

Do you have any suggestion?

Best Regards,
Jaewook.

2019년 2월 22일 (금) 오후 4:11, Lin, Shuicheng <shuicheng.lin at intel.com>님이 작성:

> Hi Jaewook,
>
> For the 8080 change, you could find the history in below mail:
>
>
> http://lists.starlingx.io/pipermail/starlingx-discuss/2019-February/003017.html
>
>
>
> For the PXE mode, you could use “system host-show controller-1 | grep
> install” to get controller-1 install status.
>
> Please make sure controller-1 is configured to boot with disk first.  Just
> manuall choose pxeboot for the first time installation.
>
> Otherwise, if controller-1 is configured to using pxeboot as first
> priority, it will lead to deadloop of installation.
>
>
>
> Best Regards
>
> Shuicheng
>
>
>
> *From:* Jaewook Oh [mailto:kyle.oh95 at gmail.com]
> *Sent:* Friday, February 22, 2019 2:54 PM
> *To:* starlingx-discuss <starlingx-discuss at lists.starlingx.io>
> *Subject:* [Starlingx-discuss] Duplex PXE Booting seems failed
>
>
>
> Hello StarlingX Team,
>
>
>
> I finally solved the horizon error, the port number was different.
>
> I don't know why the port was changed, but anyway the port number was
> 8080, not 80.
>
>
>
> But I'm now facing new obstacles, Duplex PXE Booting.
>
>
>
> I succeed to connect PXE mode, but no more process..
>
>
>
> In Controller-0, I can find below result,
>
>
>
> And another node that should've been controller-1, shows below letters on
> the display.
>
>
>
> 1) All-in-one
>
>
>
> Loading rel-19.01/installer-bzImage.........
>
> Loading
> rel-19.01/installer-initrd............................................................................ready.
>
>
>
>
>
> I waited this task for a day, but no changes.
>
>
>
> Any help would be very appreciated.
>
>
>
> Best Regards,
>
> Jaewook.
>
>
>
> ================================================
> *Jaewook Oh* (오재욱)
> IISTRC - Internet Infra System Technology Research Center
> 369 Sangdo-ro, Dongjak-gu,
> 06978, Seoul, Republic of Korea
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.starlingx.io/pipermail/starlingx-discuss/attachments/20190222/f9e94fc2/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image003.png
Type: image/png
Size: 69011 bytes
Desc: not available
URL: <http://lists.starlingx.io/pipermail/starlingx-discuss/attachments/20190222/f9e94fc2/attachment-0001.png>