[Starlingx-discuss] Duplex PXE Booting seems failed

[Cordoba Malibran, Erich]

Hi,

On PXE booting the serial output is used instead of the screen. You can change this on the
grub menu (hit “e” when grub appears) by replacing ttyS0 to tty0.

-Erich

From: Jaewook Oh <kyle.oh95 at gmail.com>
Date: Wednesday, February 27, 2019 at 7:12 PM
To: "Lin, Shuicheng" <shuicheng.lin at intel.com>
Cc: starlingx-discuss <starlingx-discuss at lists.starlingx.io>
Subject: Re: [Starlingx-discuss] Duplex PXE Booting seems failed

Hi Shuicheng,
Thank you for your kind explain :)

For the port one, it really was understandable why the port had been changed.

But for the PXE one, still I couldn't get any change.

As you said, system host-show controller-1 | grep install does not change from the first one

install_output = text
install_state = None
install_state_info = None

And also, the display doesn't seem to be changed. It does not reboot at all.
It keeps showing

1) All-in-one

Loading rel-19.01/installer-bzImage.........
Loading rel-19.01/installer-initrd............................................................................ready.

Again..
I rechecked my BIOS setting, but it was not the problem.

Do you have any suggestion?

Best Regards,
Jaewook.

2019년 2월 22일 (금) 오후 4:11, Lin, Shuicheng <shuicheng.lin at intel.com<mailto:shuicheng.lin at intel.com>>님이 작성:
Hi Jaewook,
For the 8080 change, you could find the history in below mail:
http://lists.starlingx.io/pipermail/starlingx-discuss/2019-February/003017.html

For the PXE mode, you could use “system host-show controller-1 | grep install” to get controller-1 install status.
Please make sure controller-1 is configured to boot with disk first.  Just manuall choose pxeboot for the first time installation.
Otherwise, if controller-1 is configured to using pxeboot as first priority, it will lead to deadloop of installation.

Best Regards
Shuicheng

From: Jaewook Oh [mailto:kyle.oh95 at gmail.com<mailto:kyle.oh95 at gmail.com>]
Sent: Friday, February 22, 2019 2:54 PM
To: starlingx-discuss <starlingx-discuss at lists.starlingx.io<mailto:starlingx-discuss at lists.starlingx.io>>
Subject: [Starlingx-discuss] Duplex PXE Booting seems failed

Hello StarlingX Team,

I finally solved the horizon error, the port number was different.
I don't know why the port was changed, but anyway the port number was 8080, not 80.

But I'm now facing new obstacles, Duplex PXE Booting.

I succeed to connect PXE mode, but no more process..

In Controller-0, I can find below result,

And another node that should've been controller-1, shows below letters on the display.

1) All-in-one

Loading rel-19.01/installer-bzImage.........
Loading rel-19.01/installer-initrd............................................................................ready.


I waited this task for a day, but no changes.

Any help would be very appreciated.

Best Regards,
Jaewook.

================================================
Jaewook Oh (오재욱)
IISTRC - Internet Infra System Technology Research Center
369 Sangdo-ro, Dongjak-gu,
06978, Seoul, Republic of Korea
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.starlingx.io/pipermail/starlingx-discuss/attachments/20190228/6d414222/attachment-0001.html>