[Starlingx-discuss] Duplex PXE Booting seems failed

[Sun, Austin]

Hi  :
       Are you using iso built by yourself ? or  taking  iso directly from cengn?

From: Jaewook Oh [mailto:jwoh95 at dcn.ssu.ac.kr]
Sent: Thursday, February 28, 2019 9:30 AM
To: Sun, Austin <austin.sun at intel.com<mailto:austin.sun at intel.com>>
Cc: starlingx-discuss at lists.starlingx.io<mailto:starlingx-discuss at lists.starlingx.io>
Subject: Re: [Starlingx-discuss] Duplex PXE Booting seems failed

Hi Austin,

I thought I had already replied to the mail on 22, but it seems there were some mistakes.

Here are the information.

1.
- Here is the spec
Intel(R) Xeon(R) CPU D-1557 @ 1.50GHz
RAM : 32GB (Is this the problem? I already saw for the controller 64GB RAM is needed, but I'm not sure, cause the installation was just stuck literally,
SSD : 500GB
SuperMicro

- Bios Setting:
I enabled and disabled as the instruction said.
And at first try, I didn't used UEFI, after failure, I changed it into UEFI, but the result was same.
I enabled VTx/Iommu  enable or not ?

2. I used bare metal one.. however when I pressed the buttons, nothing happened. And the controller-1 is just stopped as I said before.

Thank you for helping me :)

Best Regards,
Jaewook.


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.starlingx.io/pipermail/starlingx-discuss/attachments/20190228/26f67c83/attachment.html>