[Starlingx-discuss] Duplex PXE Booting seems failed

[Sun, Austin]

Hi Jaewook:
       Are you using iso built by yourself ? or  taking  iso directly from cengn?

From: Jaewook Oh [mailto:jwoh95 at dcn.ssu.ac.kr]
Sent: Thursday, February 28, 2019 9:30 AM
To: Sun, Austin <austin.sun at intel.com>
Cc: starlingx-discuss at lists.starlingx.io
Subject: Re: [Starlingx-discuss] Duplex PXE Booting seems failed

Hi Austin,

I thought I had already replied to the mail on 22, but it seems there were some mistakes.

Here are the information.

1.
- Here is the spec
Intel(R) Xeon(R) CPU D-1557 @ 1.50GHz
RAM : 32GB (Is this the problem? I already saw for the controller 64GB RAM is needed, but I'm not sure, cause the installation was just stuck literally,
SSD : 500GB
SuperMicro

- Bios Setting:
I enabled and disabled as the instruction said.
And at first try, I didn't used UEFI, after failure, I changed it into UEFI, but the result was same.
I enabled VTx/Iommu  enable or not ?

2. I used bare metal one.. however when I pressed the buttons, nothing happened. And the controller-1 is just stopped as I said before.

Thank you for helping me :)

Best Regards,
Jaewook.

2019년 2월 28일 (목) 오전 10:12, Sun, Austin <austin.sun at intel.com<mailto:austin.sun at intel.com>>님이 작성:
Hi Jaewook:

     1. could you share the hw info for controller-1 ?   and check bios setting ?  is it using UEFI ?  VTx/Iommu  enable or not ?
     2. Could you try access controller-1 and press Alt+F10 to see any log if the system is bare metal ?


Thanks.
BR
Austin Sun.

From: Jaewook Oh [mailto:kyle.oh95 at gmail.com<mailto:kyle.oh95 at gmail.com>]
Sent: Friday, February 22, 2019 2:54 PM
To: starlingx-discuss <starlingx-discuss at lists.starlingx.io<mailto:starlingx-discuss at lists.starlingx.io>>
Subject: [Starlingx-discuss] Duplex PXE Booting seems failed

Hello StarlingX Team,

I finally solved the horizon error, the port number was different.
I don't know why the port was changed, but anyway the port number was 8080, not 80.

But I'm now facing new obstacles, Duplex PXE Booting.

I succeed to connect PXE mode, but no more process..

In Controller-0, I can find below result,

[image.png]

And another node that should've been controller-1, shows below letters on the display.

1) All-in-one

Loading rel-19.01/installer-bzImage.........
Loading rel-19.01/installer-initrd............................................................................ready.


I waited this task for a day, but no changes.

Any help would be very appreciated.

Best Regards,
Jaewook.

================================================
Jaewook Oh (오재욱)
IISTRC - Internet Infra System Technology Research Center
369 Sangdo-ro, Dongjak-gu,
06978, Seoul, Republic of Korea
_______________________________________________
Starlingx-discuss mailing list
Starlingx-discuss at lists.starlingx.io<mailto:Starlingx-discuss at lists.starlingx.io>
http://lists.starlingx.io/cgi-bin/mailman/listinfo/starlingx-discuss


--

================================================
Jaewook Oh (오재욱)
IISTRC - Internet Infra System Technology Research Center
369 Sangdo-ro, Dongjak-gu,
06978, Seoul, Republic of Korea
Tel : +82-2-820-0841 | Mobile : +82-10-9924-2618
E-mail : jwoh95 at dcn.ssu.ac.kr<mailto:jwoh95 at dcn.ssu.ac.kr>
================================================
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.starlingx.io/pipermail/starlingx-discuss/attachments/20190228/5360a71f/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 47105 bytes
Desc: image001.png
URL: <http://lists.starlingx.io/pipermail/starlingx-discuss/attachments/20190228/5360a71f/attachment-0001.png>